These patches modify the common probe routine to recognize the RTL8188EE
chip and implement asynchronous firmware reading in the callback routine
to initialize the sw variables.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: jcheung@xxxxxxxx
Cc: machen@xxxxxxxx
Cc: mmarek@xxxxxxx
Cc: zhiyuan_yang@xxxxxxxxxxxxxx
Cc: page_he@xxxxxxxxxxxxxx
---
drivers/net/wireless/rtlwifi/efuse.c | 11 +++++++++--
drivers/net/wireless/rtlwifi/pci.c | 4 ++++
drivers/net/wireless/rtlwifi/pci.h | 1 +
drivers/net/wireless/rtlwifi/wifi.h | 1 +
4 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 41a03b1..95f5e98 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -1124,8 +1124,11 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
u8 tempval;
u16 tmpV16;
- if (pwrstate && (rtlhal->hw_type !=
- HARDWARE_TYPE_RTL8192SE)) {
+ if (pwrstate && (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE)) {
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8188EE)
+ rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_ACCESS],
+ 0x69);
+
tmpV16 = rtl_read_word(rtlpriv,
rtlpriv->cfg->maps[SYS_ISO_CTRL]);
if (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_PWC_EV12V])) {
@@ -1175,6 +1178,10 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
}
} else {
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8188EE)
+ rtl_write_byte(rtlpriv,
+ rtlpriv->cfg->maps[EFUSE_ACCESS], 0);
+
if (write) {
tempval = rtl_read_byte(rtlpriv,
rtlpriv->cfg->maps[EFUSE_TEST] +
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index eab4492..e186322 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1750,6 +1750,10 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"8192D PCI-E is found - vid/did=%x/%x\n",
venderid, deviceid);
+ } else if (deviceid == RTL_PCI_8188EE_DID) {
+ rtlhal->hw_type = HARDWARE_TYPE_RTL8188EE;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ "Find adapter, Hardware type is 8188EE\n");
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Err: Unknown device - vid/did=%x/%x\n",
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index bd368d9..d3262ec 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -94,6 +94,7 @@
#define RTL_PCI_8192CU_DID 0x8191 /*8192ce */
#define RTL_PCI_8192DE_DID 0x8193 /*8192de */
#define RTL_PCI_8192DE_DID2 0x002B /*92DE*/
+#define RTL_PCI_8188EE_DID 0x8179 /*8188ee*/
/*8192 support 16 pages of IO registers*/
#define RTL_MEM_MAPPED_IO_RANGE_8190PCI 0x1000
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index c796b01..44328ba 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -162,6 +162,7 @@ enum hardware_type {
HARDWARE_TYPE_RTL8192DU,
HARDWARE_TYPE_RTL8723AE,
HARDWARE_TYPE_RTL8723U,
+ HARDWARE_TYPE_RTL8188EE,
/* keep it last */
HARDWARE_TYPE_NUM
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
