Search Linux Wireless

Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote:

> @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local,
>  	WARN_ON_ONCE(ctx->refcount != 0);
>  
>  	if (!local->use_chanctx) {
> -		local->_oper_channel_type = NL80211_CHAN_NO_HT;
> +		local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
>  		ieee80211_hw_config(local, 0);

You also have to reset center_freq1/2 here to make it a valid chandef in
all cases, otherwise you can end up with e.g. "2412 noht20 2422 0" which
makes no sense.

I think it'd be worth sticking a

WARN_ON(!cfg80211_chandef_valid(...))

into ieee80211_hw_conf_chan().

> --- a/net/mac80211/main.c
> +++ b/net/mac80211/main.c
> @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work)
>  	ieee80211_configure_filter(local);
>  }
>  
> +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1,
> +				 const struct cfg80211_chan_def *def2)

Shouldn't be needed?

> -			local->hw.conf.channel =
> -			local->_oper_channel = &sband->channels[0];
> -			local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
> +			local->hw.conf.chandef.chan =
> +			local->_oper_chandef.chan = &sband->channels[0];
> +			local->hw.conf.chandef.width = NL80211_CHAN_NO_HT;

wrong constant

> +++ b/net/mac80211/mlme.c
> @@ -985,7 +985,9 @@ static void ieee80211_chswitch_work(struct work_struct *work)
>  {
>  	struct ieee80211_sub_if_data *sdata =
>  		container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
> +	struct ieee80211_local *local = sdata->local;
>  	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
> +	int cfreq_off;
>  
>  	if (!ieee80211_sdata_running(sdata))
>  		return;
> @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work)
>  	if (!ifmgd->associated)
>  		goto out;
>  
> -	sdata->local->_oper_channel = sdata->local->csa_channel;
> -	if (!sdata->local->ops->channel_switch) {
> +	cfreq_off = local->csa_channel->center_freq -
> +		local->_oper_chandef.chan->center_freq;
> +
> +	local->_oper_chandef.center_freq1 += cfreq_off;
> +	local->_oper_chandef.center_freq2 += cfreq_off;

Adjusting the center_freq1 is quite clearly wrong. :-)

Besides, it might not even be supported by the driver.

Since we really don't handle anything but 20 MHz channel switches
correctly, maybe we should just disconnect in that case, like we do in
the chanctx case today. I'd prefer that as a separate patch (coming
before this one) though.

Of course, patches to make it handle it correctly would also be welcome
-- I started playing with it here:

http://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git/commit/?h=wip&id=cb0308430993e96c79b3449cf0b3c744ef62b50e

(and the parent commit)

> +++ b/net/mac80211/trace.h
> @@ -269,7 +269,6 @@ DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface,
>  		 struct ieee80211_sub_if_data *sdata),
>  	TP_ARGS(local, sdata)
>  );
> -
>  TRACE_EVENT(drv_config,

please keep that :-)

>  	TP_PROTO(struct ieee80211_local *local,
>  		 u32 changed),
> @@ -286,8 +285,10 @@ TRACE_EVENT(drv_config,
>  		__field(u16, listen_interval)
>  		__field(u8, long_frame_max_tx_count)
>  		__field(u8, short_frame_max_tx_count)
> -		__field(int, center_freq)
> -		__field(int, channel_type)
> +		__field(int, control_freq)
> +		__field(int, center_freq1)
> +		__field(int, center_freq2)
> +		__field(int, chan_width)

There should be ready macros for chandef tracing -- can you use them?

> +		LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT,
> +		LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG

Hm so you used some? Why not all?

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux