Can anyone confirm if they have had an AR9374 v1.3 (=AR6004) working in sdio mode in compat v3.8? I have three AR9374s working just fine in USB mode with compat v3.8. I have an AR6103 (=AR6003), sdio, working on the same host as I'm trying the AR9374 on. The AR9374 only gets as far as registering as mmc1. The vendor and device IDs are correct. When I try to load ath6kl_sdio, I get.... ath6kl: 8f69fe04 ath6kl: 8f69fe34 ath6kl: 8f69fe7c ath6kl_sdio: probe of mmc1:0001:1 failed with error -110 loading ath6kl_core.ko debug_mask=0xffffffff doesn't give much more. compat is build with export CONFIG_ATH_DEBUG=y export CONFIG_ATH6KL_DEBUG=y and I'm getting tones on debug when booting the AR6103. My hardware settings for usb or sdio mode on the AR9374.... USB mode sdio_cmd = 10k pull down SDIO mode sdio_cmd = 10k pull up to 3.3v sdio_D1 = 10k pull up to 3.3v I've tried dropping my sdio clock from 50Mhz to 10Mhz, no go either. Jon -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
