Search Linux Wireless

ath5k: 5212 / 5213A / 2413 identity crisis?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello All,

I've been using MadWifi since I picked up a PCMCIA card a few months ago. I've tried out the ath5k driver, but can't get the card to 'iwlist wlan0 scan' AP's, or even connect to an unsecured AP through 'iwconfig' commands.

I've pasted an output of my dmesg output from both MadWifi and ath5k, as well as lspci -v.

'sudo modprobe ath_pci'
[ 2537.326216] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 2537.348389] wlan: 0.8.4.2 (0.9.3.3)
[ 2537.353061] ath_pci: 0.9.4.5 (0.9.3.3)
[ 2537.354583] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2537.620439] ath_rate_sample: 1.2 (0.9.3.3)
[ 2537.636510] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 2537.636704] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 2537.636947] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 2537.637108] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 2537.637240] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 2537.637370] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 2537.637554] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 2537.637685] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 2537.637816] wifi0: Use hw queue 8 for CAB traffic
[ 2537.637952] wifi0: Use hw queue 9 for beacons
[ 2537.643490] wifi0: Atheros 5212: mem=0x54000000, irq=20
[ 2537.647060] net wlan0: device_rename: sysfs_create_symlink failed (-17)

'sudo modprobe ath5k'
[ 2590.373989] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2590.374333] ath5k_pci 0000:07:00.0: registered as 'phy7'
[ 2590.446657] phy7: Selected rate control algorithm 'simple'
[ 2590.471263] ath5k phy7: Atheros AR5213A chip found (MAC: 0x78, PHY: 0x45)
[ 2590.471450] ath5k phy7: RF2112A 2GHz radio found (0x56)
[ 2590.485529] HW CONFIG: channel=1 freq=2412 phymode=2
[ 2590.523213] HW CONFIG: channel=1 freq=2412 phymode=2
[ 2590.538549] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.550964] HW CONFIG: channel=2 freq=2417 phymode=2
[ 2590.579394] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.591820] HW CONFIG: channel=3 freq=2422 phymode=2
[ 2590.620239] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.632661] HW CONFIG: channel=4 freq=2427 phymode=2
[ 2590.661093] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.673503] HW CONFIG: channel=5 freq=2432 phymode=2
[ 2590.701934] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.714368] HW CONFIG: channel=6 freq=2437 phymode=2
[ 2590.742785] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.755208] HW CONFIG: channel=7 freq=2442 phymode=2
[ 2590.783636] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.796057] HW CONFIG: channel=8 freq=2447 phymode=2
[ 2590.826261] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.838685] HW CONFIG: channel=9 freq=2452 phymode=2
[ 2590.867125] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.879533] HW CONFIG: channel=10 freq=2457 phymode=2
[ 2590.907962] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.920383] HW CONFIG: channel=11 freq=2462 phymode=2
[ 2590.950586] phy7: TX to low-level driver (len=40) FC=0x0040 DUR=0x0000 A1=ff:ff:ff:ff:ff:ff A2=00:13:46:d7:7f:c7 A3=ff:ff:ff:ff:ff:ff
[ 2590.963012] HW CONFIG: channel=1 freq=2412 phymode=2

'lspci -v'
07:00.0 Ethernet controller: Atheros Communications, Inc. AR2413 802.11bg NIC (rev 01)
       Subsystem: D-Link System Inc AirPlus G DWL-G630
       Flags: bus master, medium devsel, latency 168, IRQ 20
       Memory at 54000000 (32-bit, non-prefetchable) [size=64K]
       Capabilities: <access denied>


Seems as if there is a discrepancy between:
   MadWifi    (reporting an Atheros 5212)
   ath5k      (reporting an Atheros AR5213A chip with a RF2112A radio)
   lspci -v   (reporting an Atheros AR2413 chip)


I can help debug any possible solution to this.

John Daiker

PS> Sorry for the verbosity... just wanted all the info out there.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux