Hi, Aleš Voda <AVoda@xxxxxxxxxxxxx> writes: > We have some custom board equipped with AR6103G using SDIO as hif and > are having problems with AR6103 not starting after downloading the > firmware. Linux kernel being used is 3.4.5. As it is apparent from the > console output attached, the fw related files are downloaded and a > timeout occurs after uploading data patch file to the chip. After > removing ath6kl_sdio driver and renaming fw-2 and fw-3 Why do you need to rename the firmware files? What version of ath6kl are you using? Where did you get it? > are so they can not be found and loaded, timeout during fw uploads > doesn't occur anymore after insertion of the ath6kl_sdio module, but > there is a HW startup failure while awaiting CTRL message from the > chip (err = -EIO). The firmware for the chip has been downloaded from > the kernel firmware git repository. > > http://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git;a=tree;f= > ath6k/AR6003/hw2.1.1;hb=HEAD You should be using fw-3.bin. Better to remove athwlan.bin and fw-2.bin altogether from your platform. > What could be the problem? If you need any additional info please do > not hesitate to contact me. I think I don't have AR6103 myself. I'm not sure if it has some differences compared to AR6003, that's one possibility as well. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
