Don't enable it until we have (almost?) whole TX power management
figured out. It's similar to the N-PHY, the difference is that we call a
"fix" *before* disabling power control.
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/phy_ht.c | 55 +++++++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/phy_ht.h | 13 +++++++++
2 files changed, 68 insertions(+)
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 3b3517c..4300867 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -319,6 +319,46 @@ static void b43_phy_ht_tx_power_fix(struct b43_wldev *dev)
}
}
+#if 0
+static void b43_phy_ht_tx_power_ctl(struct b43_wldev *dev, bool enable)
+{
+ struct b43_phy_ht *phy_ht = dev->phy.ht;
+ u16 en_bits = B43_PHY_HT_TXPCTL_CMD_C1_COEFF |
+ B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN |
+ B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN;
+ const u16 cmd_regs[3] = { B43_PHY_HT_TXPCTL_CMD_C1,
+ B43_PHY_HT_TXPCTL_CMD_C2,
+ B43_PHY_HT_TXPCTL_CMD_C3 };
+ int i;
+
+ if (!enable) {
+ if (b43_phy_read(dev, B43_PHY_HT_TXPCTL_CMD_C1) & en_bits) {
+ /* We disable enabled TX pwr ctl, save it's state */
+ /*
+ * TODO: find the registers. On N-PHY they were 0x1ed
+ * and 0x1ee, we need 3 such a registers for HT-PHY
+ */
+ }
+ b43_phy_mask(dev, B43_PHY_HT_TXPCTL_CMD_C1, ~en_bits);
+ } else {
+ b43_phy_set(dev, B43_PHY_HT_TXPCTL_CMD_C1, en_bits);
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ for (i = 0; i < 3; i++)
+ b43_phy_write(dev, cmd_regs[i], 0x32);
+ }
+
+ for (i = 0; i < 3; i++)
+ if (phy_ht->tx_pwr_idx[i] <=
+ B43_PHY_HT_TXPCTL_CMD_C1_INIT)
+ b43_phy_write(dev, cmd_regs[i],
+ phy_ht->tx_pwr_idx[i]);
+ }
+
+ phy_ht->tx_pwr_ctl = enable;
+}
+#endif
+
/**************************************************
* Channel switching ops.
**************************************************/
@@ -455,14 +495,21 @@ static void b43_phy_ht_op_prepare_structs(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
struct b43_phy_ht *phy_ht = phy->ht;
+ int i;
memset(phy_ht, 0, sizeof(*phy_ht));
+
+ phy_ht->tx_pwr_ctl = true;
+ for (i = 0; i < 3; i++)
+ phy_ht->tx_pwr_idx[i] = B43_PHY_HT_TXPCTL_CMD_C1_INIT + 1;
}
static int b43_phy_ht_op_init(struct b43_wldev *dev)
{
+ struct b43_phy_ht *phy_ht = dev->phy.ht;
u16 tmp;
u16 clip_state[3];
+ bool saved_tx_pwr_ctl;
if (dev->dev->bus_type != B43_BUS_BCMA) {
b43err(dev->wl, "HT-PHY is supported only on BCMA bus!\n");
@@ -589,6 +636,14 @@ static int b43_phy_ht_op_init(struct b43_wldev *dev)
b43_httab_write_bulk(dev, B43_HTTAB32(0x1a, 0xc0),
B43_HTTAB_1A_C0_LATE_SIZE, b43_httab_0x1a_0xc0_late);
+ saved_tx_pwr_ctl = phy_ht->tx_pwr_ctl;
+ b43_phy_ht_tx_power_fix(dev);
+#if 0
+ b43_phy_ht_tx_power_ctl(dev, false);
+ /* TODO */
+ b43_phy_ht_tx_power_ctl(dev, saved_tx_pwr_ctl);
+#endif
+
return 0;
}
diff --git a/drivers/net/wireless/b43/phy_ht.h b/drivers/net/wireless/b43/phy_ht.h
index 684807c..bc7a43f 100644
--- a/drivers/net/wireless/b43/phy_ht.h
+++ b/drivers/net/wireless/b43/phy_ht.h
@@ -22,6 +22,13 @@
#define B43_PHY_HT_BW4 0x1D1
#define B43_PHY_HT_BW5 0x1D2
#define B43_PHY_HT_BW6 0x1D3
+#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */
+#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */
+#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */
+#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */
+#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */
+#define B43_PHY_HT_TXPCTL_CMD_C2 0x222
+#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F
#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E)
#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E)
@@ -51,6 +58,9 @@
#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118)
#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119)
+#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164)
+#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F
+
#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A)
@@ -67,6 +77,9 @@ struct b43_phy_ht_channeltab_e_phy {
struct b43_phy_ht {
u16 rf_ctl_int_save[3];
+
+ bool tx_pwr_ctl;
+ u8 tx_pwr_idx[3];
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
