While trying to get a reliable system to do throughput testing, I hit something interesting. I have two systems, same hardware, one running AP the other STA. They are cabled through attenuator, which is set to 25dB of attenuation in this case. Most of the time, I can run one-way UDP traffic at about 330Mbps either upload or download direction. But, sometimes, the AP can only transmit at about 220Mbps while the STA can still upload at 330Mbps or so. I just hit this problem, and while mucking around with it, I started/stopped all processes on the two NICs (hostapd, wpa_supplicant), causing NICs to go idle and back up... And what do you know..that 'fixed' it. Kernel is slightly patched 3.9-rc1+ from 2 days ago, but I've seen similar issues on 3.7 and earlier kernels for some time now. I am curious if there are any suggestions for what might could cause this sort of behaviour. I've looked through various debugfs files and so forth, and cannot find any obvious reason for the observed behaviour. Thanks, Ben -- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
