Hi folks, I've got some problem with iwl3945: If I run xset dpms force off for the local display while some network traffic is running, then the iwl3945 gets stuck. Syslog says: Jan 23 19:29:41 daffy kernel: iwl3945: Microcode SW error detected. Restarting 0x2000008. Jan 23 19:29:43 daffy kernel: iwl3945: Can't stop Rx DMA. The same happens if the Xserver runs into the configured timeout. If the network is idle, then there is no such problem, as it seems. If the Xserver is not running, and if the console runs into dpms, then iwl3945 seems to stay alive, too, but to be sure I would need some command similar to the xset shown above. If the net is stuck (and if I am lucky), then I can rmmod iwl3945 and load it again, but sometimes I have to reboot. The machine is a Dell laptop xps m1330 running 64bit kernel 2.6.24-rc8. Encryption is wpa/psk. iwl3945 is loaded without any special options. At boot time there were no unusual call traces or something like this. The configured XWindow driver is "nv", but I could reproduce this with NVidia's proprietary "nvidia" driver, too. The vga device is a "nVidia Corporation GeForce 8400M GS". I would be glad to help to track this down. Regards Harri - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
