From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
When the RX chainmask is set to 0x2 for AR9462, certain values
from chain1 have to be programmed for chain0 also.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 881e989..e6b92ff 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3606,6 +3606,12 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz);
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value);
+ if ((AR_SREV_9462(ah)) && (ah->rxchainmask == 0x2)) {
+ value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz);
+ REG_RMW_FIELD(ah, switch_chain_reg[0],
+ AR_SWITCH_TABLE_ALL, value);
+ }
+
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
if ((ah->rxchainmask & BIT(chain)) ||
(ah->txchainmask & BIT(chain))) {
@@ -3772,6 +3778,17 @@ static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
AR_PHY_EXT_ATTEN_CTL_2,
};
+ if ((AR_SREV_9462(ah)) && (ah->rxchainmask == 0x2)) {
+ value = ar9003_hw_atten_chain_get(ah, 1, chan);
+ REG_RMW_FIELD(ah, ext_atten_reg[0],
+ AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
+
+ value = ar9003_hw_atten_chain_get_margin(ah, 1, chan);
+ REG_RMW_FIELD(ah, ext_atten_reg[0],
+ AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN,
+ value);
+ }
+
/* Test value. if 0 then attenuation is unused. Don't load anything. */
for (i = 0; i < 3; i++) {
if (ah->txchainmask & BIT(i)) {
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
