These patches modify the common probe routine to recognize the RTL8188EE
chip and implement asynchronous firmware reading in the callback routine
to initialize the sw variables.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: jcheung@xxxxxxxx
Cc: machen@xxxxxxxx
Cc: mmarek@xxxxxxx
---
drivers/net/wireless/rtlwifi/efuse.c | 11 +++++++++--
drivers/net/wireless/rtlwifi/pci.c | 4 ++++
drivers/net/wireless/rtlwifi/pci.h | 1 +
drivers/net/wireless/rtlwifi/rtl8188ee/sw.c | 28 ++++++++++++++--------------
drivers/net/wireless/rtlwifi/wifi.h | 1 +
5 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 41a03b1..95f5e98 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -1124,8 +1124,11 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
u8 tempval;
u16 tmpV16;
- if (pwrstate && (rtlhal->hw_type !=
- HARDWARE_TYPE_RTL8192SE)) {
+ if (pwrstate && (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE)) {
+ if(rtlhal->hw_type == HARDWARE_TYPE_RTL8188EE)
+ rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_ACCESS],
+ 0x69);
+
tmpV16 = rtl_read_word(rtlpriv,
rtlpriv->cfg->maps[SYS_ISO_CTRL]);
if (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_PWC_EV12V])) {
@@ -1175,6 +1178,10 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
}
} else {
+ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8188EE)
+ rtl_write_byte(rtlpriv,
+ rtlpriv->cfg->maps[EFUSE_ACCESS], 0);
+
if (write) {
tempval = rtl_read_byte(rtlpriv,
rtlpriv->cfg->maps[EFUSE_TEST] +
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 42c442e..541939a 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1721,6 +1721,10 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
"8192D PCI-E is found - vid/did=%x/%x\n",
venderid, deviceid);
+ } else if(deviceid == RTL_PCI_8188EE_DID){
+ rtlhal->hw_type = HARDWARE_TYPE_RTL8188EE;
+ RT_TRACE(rtlpriv, COMP_INIT,DBG_LOUD,
+ "Find adapter, Hardware type is 8188EE\n");
} else {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Err: Unknown device - vid/did=%x/%x\n",
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index bd368d9..d3262ec 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -94,6 +94,7 @@
#define RTL_PCI_8192CU_DID 0x8191 /*8192ce */
#define RTL_PCI_8192DE_DID 0x8193 /*8192de */
#define RTL_PCI_8192DE_DID2 0x002B /*92DE*/
+#define RTL_PCI_8188EE_DID 0x8179 /*8188ee*/
/*8192 support 16 pages of IO registers*/
#define RTL_MEM_MAPPED_IO_RANGE_8190PCI 0x1000
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
index 690f8e2..3e8fe6d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
@@ -89,8 +89,6 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
int err = 0;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- const struct firmware *firmware;
- char *fw_name = NULL;
u8 tid;
rtl8188ee_bt_reg_init(hw);
@@ -136,10 +134,17 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
0);
rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0);
rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN);
+
+ /* for debug level */
+ rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
+ if (!rtlpriv->psc.inactiveps)
+ pr_info("rtl8188ee: Power Save off (module option)\n");
+ if (!rtlpriv->psc.fwctrl_lps)
+ pr_info("rtl8188ee: FW Power Save off (module option)\n");
rtlpriv->psc.reg_fwctrl_lps = 3;
rtlpriv->psc.reg_max_lps_awakeintvl = 5;
/* for ASPM, you can close aspm through
@@ -162,23 +167,18 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
return 1;
}
- fw_name = "rtlwifi/rtl8188efw.bin";
- err = request_firmware(&firmware, fw_name, rtlpriv->io.dev);
-
+ /* TODO: convert to asynchronous firmware loading */
+ rtlpriv->cfg->fw_name = "rtlwifi/rtl8188efw.bin";
+ rtlpriv->max_fw_size = 0x8000;
+ pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
+ err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
+ rtlpriv->io.dev, GFP_KERNEL, hw,
+ rtl_fw_cb);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Failed to request firmware!\n");
return 1;
}
- if (firmware->size > 0x8000) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Firmware is too big!\n");
- release_firmware(firmware);
- return 1;
- }
- memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
- rtlpriv->rtlhal.fwsize = firmware->size;
- release_firmware(firmware);
/* for early mode */
rtlpriv->rtlhal.earlymode_enable = false;
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index c3a8e9e..6026d10 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -162,6 +162,7 @@ enum hardware_type {
HARDWARE_TYPE_RTL8192DU,
HARDWARE_TYPE_RTL8723AE,
HARDWARE_TYPE_RTL8723U,
+ HARDWARE_TYPE_RTL8188EE,
/* keep it last */
HARDWARE_TYPE_NUM
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
