The ucode is able to answer probe response by itself. This writes such a template into the specific memory. Currently the probe requests are also send to mac80211 so there are more answers send to a requesting client. We have to make the ucode stop sending probe requests to the driver. Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx> --- .../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 11 ++ drivers/net/wireless/brcm80211/brcmsmac/main.c | 112 +++++--------------- drivers/net/wireless/brcm80211/brcmsmac/main.h | 1 + drivers/net/wireless/brcm80211/brcmsmac/pub.h | 2 + 4 files changed, 42 insertions(+), 84 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 3bb0aec..1348d73 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -538,6 +538,15 @@ brcms_ops_bss_info_changed(struct ieee80211_hw *hw, spin_unlock_bh(&wl->lock); } + if (changed & BSS_CHANGED_AP_PROBE_RESP) { + struct sk_buff *probe_resp; + + spin_lock_bh(&wl->lock); + probe_resp = ieee80211_proberesp_get(hw, vif); + brcms_c_set_new_probe_resp(wl->wlc, probe_resp); + spin_unlock_bh(&wl->lock); + } + if (changed & BSS_CHANGED_BEACON_ENABLED) { /* Beaconing should be enabled/disabled (beaconing modes) */ brcms_err(core, "%s: Beacon enabled: %s\n", __func__, @@ -1036,6 +1045,8 @@ static int ieee_hw_init(struct ieee80211_hw *hw) hw->channel_change_time = 7 * 1000; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; + hw->rate_control_algorithm = "minstrel_ht"; hw->sta_data_size = 0; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7c97de8..15bff24 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -451,6 +451,8 @@ static void brcms_c_detach_mfree(struct brcms_c_info *wlc) kfree(wlc->hw); if (wlc->beacon) dev_kfree_skb_any(wlc->beacon); + if (wlc->probe_resp) + dev_kfree_skb_any(wlc->probe_resp); /* free the wlc */ kfree(wlc); @@ -7323,69 +7325,6 @@ brcms_c_mod_prb_rsp_rate_table(struct brcms_c_info *wlc, uint frame_len) } } -/* Max buffering needed for beacon template/prb resp template is 142 bytes. - * - * PLCP header is 6 bytes. - * 802.11 A3 header is 24 bytes. - * Max beacon frame body template length is 112 bytes. - * Max probe resp frame body template length is 110 bytes. - * - * *len on input contains the max length of the packet available. - * - * The *len value is set to the number of bytes in buf used, and starts - * with the PLCP and included up to, but not including, the 4 byte FCS. - */ -static void -brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type, - u32 bcn_rspec, - struct brcms_bss_cfg *cfg, u16 *buf, int *len) -{ - static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255}; - struct cck_phy_hdr *plcp; - struct ieee80211_mgmt *h; - int hdr_len, body_len; - - hdr_len = D11_PHY_HDR_LEN + DOT11_MAC_HDR_LEN; - - /* calc buffer size provided for frame body */ - body_len = *len - hdr_len; - /* return actual size */ - *len = hdr_len + body_len; - - /* format PHY and MAC headers */ - memset(buf, 0, hdr_len); - - plcp = (struct cck_phy_hdr *) buf; - - /* - * PLCP for Probe Response frames are filled in from - * core's rate table - */ - if (type == IEEE80211_STYPE_BEACON) - /* fill in PLCP */ - brcms_c_compute_plcp(wlc, bcn_rspec, - (DOT11_MAC_HDR_LEN + body_len + FCS_LEN), - (u8 *) plcp); - - /* "Regular" and 16 MBSS but not for 4 MBSS */ - /* Update the phytxctl for the beacon based on the rspec */ - brcms_c_beacon_phytxctl_txant_upd(wlc, bcn_rspec); - - h = (struct ieee80211_mgmt *)&plcp[1]; - - /* fill in 802.11 header */ - h->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | type); - - /* DUR is 0 for multicast bcn, or filled in by MAC for prb resp */ - /* A1 filled in by MAC for prb resp, broadcast for bcn */ - if (type == IEEE80211_STYPE_BEACON) - memcpy(&h->da, ðer_bcast, ETH_ALEN); - memcpy(&h->sa, &wlc->pub->cur_etheraddr, ETH_ALEN); - memcpy(&h->bssid, &cfg->BSSID, ETH_ALEN); - - /* SEQ filled in by MAC */ -} - int brcms_c_get_header_len(void) { return TXOFF; @@ -7526,6 +7465,20 @@ void brcms_c_set_new_beacon(struct brcms_c_info *wlc, struct sk_buff *beacon, brcms_c_update_beacon(wlc); } +void brcms_c_set_new_probe_resp(struct brcms_c_info *wlc, + struct sk_buff *probe_resp) +{ + if (!probe_resp) + return; + if (wlc->probe_resp) + dev_kfree_skb_any(wlc->probe_resp); + wlc->probe_resp = probe_resp; + + /* add PLCP */ + skb_push(wlc->probe_resp, D11_PHY_HDR_LEN); + brcms_c_update_probe_resp(wlc, false); +} + /* Write ssid into shared memory */ static void brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg) @@ -7545,30 +7498,19 @@ brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg) static void brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg, + struct sk_buff *probe_resp, bool suspend) { - u16 *prb_resp; - int len = BCN_TMPL_LEN; + int len; - prb_resp = kmalloc(BCN_TMPL_LEN, GFP_ATOMIC); - if (!prb_resp) - return; - - /* - * write the probe response to hardware, or save in - * the config structure - */ - - /* create the probe response template */ - brcms_c_bcn_prb_template(wlc, IEEE80211_STYPE_PROBE_RESP, 0, - cfg, prb_resp, &len); + len = min_t(size_t, probe_resp->len, BCN_TMPL_LEN); if (suspend) brcms_c_suspend_mac_and_wait(wlc); /* write the probe response into the template region */ brcms_b_write_template_ram(wlc->hw, T_PRS_TPL_BASE, - (len + 3) & ~3, prb_resp); + (len + 3) & ~3, probe_resp->data); /* write the length of the probe response frame (+PLCP/-FCS) */ brcms_b_write_shm(wlc->hw, M_PRB_RESP_FRM_LEN, (u16) len); @@ -7582,13 +7524,11 @@ brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc, * PLCP header for the call to brcms_c_mod_prb_rsp_rate_table() * by subtracting the PLCP len and adding the FCS. */ - len += (-D11_PHY_HDR_LEN + FCS_LEN); - brcms_c_mod_prb_rsp_rate_table(wlc, (u16) len); + brcms_c_mod_prb_rsp_rate_table(wlc, + (u16)len + FCS_LEN - D11_PHY_HDR_LEN); if (suspend) brcms_c_enable_mac(wlc); - - kfree(prb_resp); } void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend) @@ -7596,8 +7536,12 @@ void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend) struct brcms_bss_cfg *bsscfg = wlc->bsscfg; /* update AP or IBSS probe responses */ - if (wlc->pub->up && bsscfg->type == BRCMS_TYPE_AP) - brcms_c_bss_update_probe_resp(wlc, bsscfg, suspend); + if (wlc->pub->up && bsscfg->type == BRCMS_TYPE_AP) { + if (!wlc->probe_resp) + return; + brcms_c_bss_update_probe_resp(wlc, bsscfg, wlc->probe_resp, + suspend); + } } int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo, diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.h b/drivers/net/wireless/brcm80211/brcmsmac/main.h index 82382da..b5d7a38 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.h @@ -567,6 +567,7 @@ struct brcms_c_info { struct sk_buff *beacon; u16 beacon_tim_offset; u16 beacon_dtim_period; + struct sk_buff *probe_resp; }; /* antsel module specific state */ diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h index 6ed0a20..5e6db62 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h @@ -336,6 +336,8 @@ extern void brcms_c_update_beacon(struct brcms_c_info *wlc); extern void brcms_c_set_new_beacon(struct brcms_c_info *wlc, struct sk_buff *beacon, u16 tim_offset, u16 dtim_period); +extern void brcms_c_set_new_probe_resp(struct brcms_c_info *wlc, + struct sk_buff *probe_resp); extern void brcms_c_set_ssid(struct brcms_c_info *wlc, u8 *ssid, size_t ssid_len); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html