Hi, in our setups we experience pure ANI operational in mesh mode
VS AP mode, after debuffing and digging in ANI code i find what ANI
in AP mode work in limited mode, i try this mode with mesh and seems
getting same good operation as in AP mode, i am not familiar with ANI
may be there is another better way to fix this issue?
changes what i made:
diff -ruN compat-drivers-3.7.6-1/drivers/net/wireless/ath/ath9k/ani.c compat-drivers-3.7.6-1-new/drivers/net/wireless/ath/ath9k/ani.c
--- compat-drivers-3.7.6-1/drivers/net/wireless/ath/ath9k/ani.c 2013-02-11 04:23:53.000000000 +0400
+++ compat-drivers-3.7.6-1-new/drivers/net/wireless/ath/ath9k/ani.c 2013-02-16 05:03:46.640746411 +0400
@@ -303,7 +303,8 @@
ah->stats.ast_ani_reset++;
/* only allow a subset of functions in AP mode */
- if (ah->opmode == NL80211_IFTYPE_AP) {
+ if (ah->opmode == NL80211_IFTYPE_AP || ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ ath_dbg(common, ANI, "only allow a subset of functions in AP or MESH mode");
if (IS_CHAN_2GHZ(chan)) {
ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
ATH9K_ANI_FIRSTEP_LEVEL);
@@ -323,7 +324,8 @@
if (is_scanning ||
(ah->opmode != NL80211_IFTYPE_STATION &&
- ah->opmode != NL80211_IFTYPE_ADHOC)) {
+ ah->opmode != NL80211_IFTYPE_ADHOC &&
+ ah->opmode != NL80211_IFTYPE_MESH_POINT)) {
/*
* If we're scanning or in AP mode, the defaults (ini)
* should be in place. For an AP we assume the historical
C уважением With Best Regards
Георгиевский Юрий. Georgiewskiy Yuriy
+7 4872 711666 +7 4872 711666
факс +7 4872 711143 fax +7 4872 711143
Компания ООО "Ай Ти Сервис" IT Service Ltd
http://nkoort.ru http://nkoort.ru
JID: GHhost@xxxxxxxxxx JID: GHhost@xxxxxxxxxx
YG129-RIPE YG129-RIPE
