From: Johannes Berg <johannes.berg@xxxxxxxxx> Introduce the ability to leave the plink_state unchanged, reject invalid plink states or actions and move the needed constants for plink actions to the right header file. Also reject plink_state changes for non-mesh interfaces. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> --- include/net/cfg80211.h | 15 ++------------- include/uapi/linux/nl80211.h | 20 +++++++++++++++++++- net/mac80211/cfg.c | 14 +++++++++++--- net/wireless/nl80211.c | 21 +++++++++++++++++---- 4 files changed, 49 insertions(+), 21 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 61b594e..47539e8 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -611,22 +611,10 @@ struct cfg80211_ap_settings { }; /** - * enum plink_action - actions to perform in mesh peers - * - * @PLINK_ACTION_INVALID: action 0 is reserved - * @PLINK_ACTION_OPEN: start mesh peer link establishment - * @PLINK_ACTION_BLOCK: block traffic from this mesh peer - */ -enum plink_actions { - PLINK_ACTION_INVALID, - PLINK_ACTION_OPEN, - PLINK_ACTION_BLOCK, -}; - -/** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability + * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. @@ -634,6 +622,7 @@ enum plink_actions { enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), STATION_PARAM_APPLY_CAPABILITY = BIT(1), + STATION_PARAM_APPLY_PLINK_STATE = BIT(2), }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c46bb01..7dcc69f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -884,7 +884,8 @@ enum nl80211_commands { * consisting of a nested array. * * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path * info given for %NL80211_CMD_GET_MPATH, nested attribute described at @@ -3307,6 +3308,23 @@ enum nl80211_plink_state { MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 }; +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 #define NL80211_REPLAY_CTR_LEN 8 diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 179dcbd..d14867c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1261,7 +1261,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH u32 changed = 0; - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED && + (params->sta_modify_mask & + STATION_PARAM_APPLY_PLINK_STATE)) { switch (params->plink_state) { case NL80211_PLINK_ESTAB: if (sta->plink_state != NL80211_PLINK_ESTAB) @@ -1292,12 +1294,18 @@ static int sta_apply_parameters(struct ieee80211_local *local, /* nothing */ break; } + } else if (params->sta_modify_mask & + STATION_PARAM_APPLY_PLINK_STATE) { + return -EINVAL; } else { switch (params->plink_action) { - case PLINK_ACTION_OPEN: + case NL80211_PLINK_ACTION_NO_ACTION: + /* nothing */ + break; + case NL80211_PLINK_ACTION_OPEN: changed |= mesh_plink_open(sta); break; - case PLINK_ACTION_BLOCK: + case NL80211_PLINK_ACTION_BLOCK: changed |= mesh_plink_block(sta); break; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 580ffea..b1be20f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3516,13 +3516,20 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) if (parse_station_flags(info, dev->ieee80211_ptr->iftype, ¶ms)) return -EINVAL; - if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) + if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION]) { params.plink_action = - nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); + nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); + if (params.plink_action >= NUM_NL80211_PLINK_ACTIONS) + return -EINVAL; + } - if (info->attrs[NL80211_ATTR_STA_PLINK_STATE]) + if (info->attrs[NL80211_ATTR_STA_PLINK_STATE]) { params.plink_state = - nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]); + nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]); + if (params.plink_state >= NUM_NL80211_PLINK_STATES) + return -EINVAL; + params.sta_modify_mask |= STATION_PARAM_APPLY_PLINK_STATE; + } if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) { enum nl80211_mesh_power_mode pm = nla_get_u32( @@ -3544,6 +3551,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.local_pm) return -EINVAL; + if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) + return -EINVAL; /* TDLS can't be set, ... */ if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) @@ -3607,6 +3616,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.local_pm) return -EINVAL; + if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) + return -EINVAL; /* reject any changes other than AUTHORIZED or WME (for TDLS) */ if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | BIT(NL80211_STA_FLAG_WME))) @@ -3618,6 +3629,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.local_pm) return -EINVAL; + if (params.sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) + return -EINVAL; if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || info->attrs[NL80211_ATTR_VHT_CAPABILITY]) return -EINVAL; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html