From: Johannes Berg <johannes.berg@xxxxxxxxx>
The next patch will need it further up in the file, so
move it unchanged now.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
net/mac80211/mlme.c | 390 ++++++++++++++++++++++++++--------------------------
1 file changed, 195 insertions(+), 195 deletions(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8af59f8..3ca390f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -174,6 +174,201 @@ static int ecw2cw(int ecw)
return (1 << ecw) - 1;
}
+static u32 chandef_downgrade(struct cfg80211_chan_def *c)
+{
+ u32 ret;
+ int tmp;
+
+ switch (c->width) {
+ case NL80211_CHAN_WIDTH_20:
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ c->width = NL80211_CHAN_WIDTH_20;
+ c->center_freq1 = c->chan->center_freq;
+ ret = IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P40 */
+ tmp /= 2;
+ /* freq_P40 */
+ c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
+ c->width = NL80211_CHAN_WIDTH_40;
+ ret = IEEE80211_STA_DISABLE_VHT;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ c->center_freq2 = 0;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_160:
+ /* n_P20 */
+ tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
+ /* n_P80 */
+ tmp /= 4;
+ c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
+ c->width = NL80211_CHAN_WIDTH_80;
+ ret = IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
+ break;
+ default:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ WARN_ON_ONCE(1);
+ c->width = NL80211_CHAN_WIDTH_20_NOHT;
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ break;
+ }
+
+ WARN_ON_ONCE(!cfg80211_chandef_valid(c));
+
+ return ret;
+}
+
+static u32
+ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_supported_band *sband,
+ struct ieee80211_channel *channel,
+ const struct ieee80211_ht_operation *ht_oper,
+ const struct ieee80211_vht_operation *vht_oper,
+ struct cfg80211_chan_def *chandef)
+{
+ struct cfg80211_chan_def vht_chandef;
+ u32 ht_cfreq, ret;
+
+ chandef->chan = channel;
+ chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef->center_freq1 = channel->center_freq;
+ chandef->center_freq2 = 0;
+
+ if (!ht_oper || !sband->ht_cap.ht_supported) {
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ chandef->width = NL80211_CHAN_WIDTH_20;
+
+ ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
+ channel->band);
+ /* check that channel matches the right operating channel */
+ if (channel->center_freq != ht_cfreq) {
+ /*
+ * It's possible that some APs are confused here;
+ * Netgear WNDR3700 sometimes reports 4 higher than
+ * the actual channel in association responses, but
+ * since we look at probe response/beacon data here
+ * it should be OK.
+ */
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
+ ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ /* check 40 MHz support, if we have it */
+ if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ chandef->width = NL80211_CHAN_WIDTH_40;
+ chandef->center_freq1 += 10;
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ chandef->width = NL80211_CHAN_WIDTH_40;
+ chandef->center_freq1 -= 10;
+ break;
+ }
+ } else {
+ /* 40 MHz (and 80 MHz) must be supported for VHT */
+ ret = IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_40MHZ;
+ goto out;
+ }
+
+ if (!vht_oper || !sband->vht_cap.vht_supported) {
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ vht_chandef.chan = channel;
+ vht_chandef.center_freq1 =
+ ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
+ channel->band);
+ vht_chandef.center_freq2 = 0;
+
+ if (vht_oper->center_freq_seg2_idx)
+ vht_chandef.center_freq2 =
+ ieee80211_channel_to_frequency(
+ vht_oper->center_freq_seg2_idx,
+ channel->band);
+
+ switch (vht_oper->chan_width) {
+ case IEEE80211_VHT_CHANWIDTH_USE_HT:
+ vht_chandef.width = chandef->width;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_80;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_160MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_160;
+ break;
+ case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+ vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
+ break;
+ default:
+ sdata_info(sdata,
+ "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
+ vht_oper->chan_width);
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ if (!cfg80211_chandef_valid(&vht_chandef)) {
+ sdata_info(sdata,
+ "AP VHT information is invalid, disable VHT\n");
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
+ ret = 0;
+ goto out;
+ }
+
+ if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
+ sdata_info(sdata,
+ "AP VHT information doesn't match HT, disable VHT\n");
+ ret = IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ *chandef = vht_chandef;
+
+ ret = 0;
+
+ while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+ IEEE80211_CHAN_DISABLED)) {
+ if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
+ ret = IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT;
+ goto out;
+ }
+
+ ret = chandef_downgrade(chandef);
+ }
+
+ if (chandef->width != vht_chandef.width)
+ sdata_info(sdata,
+ "local regulatory prevented using AP HT/VHT configuration, downgraded\n");
+
+out:
+ WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
+ return ret;
+}
+
static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_ht_operation *ht_oper,
@@ -3305,201 +3500,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb,
return 0;
}
-static u32 chandef_downgrade(struct cfg80211_chan_def *c)
-{
- u32 ret;
- int tmp;
-
- switch (c->width) {
- case NL80211_CHAN_WIDTH_20:
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_40:
- c->width = NL80211_CHAN_WIDTH_20;
- c->center_freq1 = c->chan->center_freq;
- ret = IEEE80211_STA_DISABLE_40MHZ |
- IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80:
- tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P40 */
- tmp /= 2;
- /* freq_P40 */
- c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
- c->width = NL80211_CHAN_WIDTH_40;
- ret = IEEE80211_STA_DISABLE_VHT;
- break;
- case NL80211_CHAN_WIDTH_80P80:
- c->center_freq2 = 0;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- case NL80211_CHAN_WIDTH_160:
- /* n_P20 */
- tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
- /* n_P80 */
- tmp /= 4;
- c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
- c->width = NL80211_CHAN_WIDTH_80;
- ret = IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
- break;
- default:
- case NL80211_CHAN_WIDTH_20_NOHT:
- WARN_ON_ONCE(1);
- c->width = NL80211_CHAN_WIDTH_20_NOHT;
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- break;
- }
-
- WARN_ON_ONCE(!cfg80211_chandef_valid(c));
-
- return ret;
-}
-
-static u32
-ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_supported_band *sband,
- struct ieee80211_channel *channel,
- const struct ieee80211_ht_operation *ht_oper,
- const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef)
-{
- struct cfg80211_chan_def vht_chandef;
- u32 ht_cfreq, ret;
-
- chandef->chan = channel;
- chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
- chandef->center_freq1 = channel->center_freq;
- chandef->center_freq2 = 0;
-
- if (!ht_oper || !sband->ht_cap.ht_supported) {
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- chandef->width = NL80211_CHAN_WIDTH_20;
-
- ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
- channel->band);
- /* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
- /*
- * It's possible that some APs are confused here;
- * Netgear WNDR3700 sometimes reports 4 higher than
- * the actual channel in association responses, but
- * since we look at probe response/beacon data here
- * it should be OK.
- */
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- /* check 40 MHz support, if we have it */
- if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
- chandef->width = NL80211_CHAN_WIDTH_40;
- chandef->center_freq1 += 10;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
- chandef->width = NL80211_CHAN_WIDTH_40;
- chandef->center_freq1 -= 10;
- break;
- }
- } else {
- /* 40 MHz (and 80 MHz) must be supported for VHT */
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (!vht_oper || !sband->vht_cap.vht_supported) {
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- vht_chandef.chan = channel;
- vht_chandef.center_freq1 =
- ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
- channel->band);
- vht_chandef.center_freq2 = 0;
-
- if (vht_oper->center_freq_seg2_idx)
- vht_chandef.center_freq2 =
- ieee80211_channel_to_frequency(
- vht_oper->center_freq_seg2_idx,
- channel->band);
-
- switch (vht_oper->chan_width) {
- case IEEE80211_VHT_CHANWIDTH_USE_HT:
- vht_chandef.width = chandef->width;
- break;
- case IEEE80211_VHT_CHANWIDTH_80MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_80;
- break;
- case IEEE80211_VHT_CHANWIDTH_160MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_160;
- break;
- case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
- vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
- break;
- default:
- sdata_info(sdata,
- "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
- vht_oper->chan_width);
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (!cfg80211_chandef_valid(&vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information is invalid, disable VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
- ret = 0;
- goto out;
- }
-
- if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- sdata_info(sdata,
- "AP VHT information doesn't match HT, disable VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- *chandef = vht_chandef;
-
- ret = 0;
-
- while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
- IEEE80211_CHAN_DISABLED)) {
- if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT;
- goto out;
- }
-
- ret = chandef_downgrade(chandef);
- }
-
- if (chandef->width != vht_chandef.width)
- sdata_info(sdata,
- "local regulatory prevented using AP HT/VHT configuration, downgraded\n");
-
-out:
- WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
- return ret;
-}
-
static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *cbss)
{
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
