From: Johannes Berg <johannes.berg@xxxxxxxxx>
Newer firmware revisions have a completely new
firmware API. This is the new driver for this
new API.
I've listed the people who directly contributed
code, but many others from various teams have
contributed in other ways.
Change-Id: Id62a7ce1b80ec762c9a902b93188d3502837b77b
Cc: Alexander Bondar <alexander.bondar@xxxxxxxxx>
Cc: Amit Beka <amit.beka@xxxxxxxxx>
Cc: Amnon Paz <amnonx.paz@xxxxxxxxx>
Cc: Assaf Krauss <assaf.krauss@xxxxxxxxx>
Cc: David Spinadel <david.spinadel@xxxxxxxxx>
Cc: Dor Shaish <dor.shaish@xxxxxxxxx>
Cc: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
Cc: Eytan Lifshitz <eytan.lifshitz@xxxxxxxxx>
Cc: Ilan Peer <ilan.peer@xxxxxxxxx>
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 561 +++++++++++++++++++++++++
1 file changed, 561 insertions(+)
create mode 100644 drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
new file mode 100644
index 0000000..670ac8f
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -0,0 +1,561 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __fw_api_scan_h__
+#define __fw_api_scan_h__
+
+#include "fw-api.h"
+
+/* Scan Commands, Responses, Notifications */
+
+/* Masks for iwl_scan_channel.type flags */
+#define SCAN_CHANNEL_TYPE_PASSIVE 0
+#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0)
+#define SCAN_CHANNEL_NARROW_BAND BIT(22)
+
+/* Max number of IEs for direct SSID scans in a command */
+#define PROBE_OPTION_MAX 20
+
+/**
+ * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
+ * @channel: band is selected by iwl_scan_cmd "flags" field
+ * @tx_gain: gain for analog radio
+ * @dsp_atten: gain for DSP
+ * @active_dwell: dwell time for active scan in TU, typically 5-50
+ * @passive_dwell: dwell time for passive scan in TU, typically 20-500
+ * @type: type is broken down to these bits:
+ * bit 0: 0 = passive, 1 = active
+ * bits 1-20: SSID direct bit map. If any of these bits is set then
+ * the corresponding SSID IE is transmitted in probe request
+ * (bit i adds IE in position i to the probe request)
+ * bit 22: channel width, 0 = regular, 1 = TGj narrow channel
+ *
+ * @iteration_count:
+ * @iteration_interval:
+ * This struct is used once for each channel in the scan list.
+ * Each channel can independently select:
+ * 1) SSID for directed active scans
+ * 2) Txpower setting (for rate specified within Tx command)
+ * 3) How long to stay on-channel (behavior may be modified by quiet_time,
+ * quiet_plcp_th, good_CRC_th)
+ *
+ * To avoid uCode errors, make sure the following are true (see comments
+ * under struct iwl_scan_cmd about max_out_time and quiet_time):
+ * 1) If using passive_dwell (i.e. passive_dwell != 0):
+ * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
+ * 2) quiet_time <= active_dwell
+ * 3) If restricting off-channel time (i.e. max_out_time !=0):
+ * passive_dwell < max_out_time
+ * active_dwell < max_out_time
+ */
+struct iwl_scan_channel {
+ __le32 type;
+ __le16 channel;
+ __le16 iteration_count;
+ __le32 iteration_interval;
+ __le16 active_dwell;
+ __le16 passive_dwell;
+} __packed; /* SCAN_CHANNEL_CONTROL_API_S_VER_1 */
+
+/**
+ * struct iwl_ssid_ie - directed scan network information element
+ *
+ * Up to 20 of these may appear in REPLY_SCAN_CMD,
+ * selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 entries.
+ * SSID IEs get transmitted in reverse order of entry.
+ */
+struct iwl_ssid_ie {
+ u8 id;
+ u8 len;
+ u8 ssid[IEEE80211_MAX_SSID_LEN];
+} __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */
+
+/**
+ * iwl_scan_flags - masks for scan command flags
+ *@SCAN_FLAGS_PERIODIC_SCAN:
+ *@SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX:
+ *@SCAN_FLAGS_DELAYED_SCAN_LOWBAND:
+ *@SCAN_FLAGS_DELAYED_SCAN_HIGHBAND:
+ *@SCAN_FLAGS_FRAGMENTED_SCAN:
+ */
+enum iwl_scan_flags {
+ SCAN_FLAGS_PERIODIC_SCAN = BIT(0),
+ SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX = BIT(1),
+ SCAN_FLAGS_DELAYED_SCAN_LOWBAND = BIT(2),
+ SCAN_FLAGS_DELAYED_SCAN_HIGHBAND = BIT(3),
+ SCAN_FLAGS_FRAGMENTED_SCAN = BIT(4),
+};
+
+/**
+ * enum iwl_scan_type - Scan types for scan command
+ * @SCAN_TYPE_FORCED:
+ * @SCAN_TYPE_BACKGROUND:
+ * @SCAN_TYPE_OS:
+ * @SCAN_TYPE_ROAMING:
+ * @SCAN_TYPE_ACTION:
+ * @SCAN_TYPE_DISCOVERY:
+ * @SCAN_TYPE_DISCOVERY_FORCED:
+ */
+enum iwl_scan_type {
+ SCAN_TYPE_FORCED = 0,
+ SCAN_TYPE_BACKGROUND = 1,
+ SCAN_TYPE_OS = 2,
+ SCAN_TYPE_ROAMING = 3,
+ SCAN_TYPE_ACTION = 4,
+ SCAN_TYPE_DISCOVERY = 5,
+ SCAN_TYPE_DISCOVERY_FORCED = 6,
+}; /* SCAN_ACTIVITY_TYPE_E_VER_1 */
+
+/* Maximal number of channels to scan */
+#define MAX_NUM_SCAN_CHANNELS 0x24
+
+/**
+ * struct iwl_scan_cmd - scan request command
+ * ( SCAN_REQUEST_CMD = 0x80 )
+ * @len: command length in bytes
+ * @scan_flags: scan flags from SCAN_FLAGS_*
+ * @channel_count: num of channels in channel list (1 - MAX_NUM_SCAN_CHANNELS)
+ * @quiet_time: in msecs, dwell this time for active scan on quiet channels
+ * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than
+ * this number of packets were received (typically 1)
+ * @passive2active: is auto switching from passive to active allowed (0 or 1)
+ * @rxchain_sel_flags: RXON_RX_CHAIN_*
+ * @max_out_time: in usecs, max out of serving channel time
+ * @suspend_time: how long to pause scan when returning to service channel:
+ * bits 0-19: beacon interal in usecs (suspend before executing)
+ * bits 20-23: reserved
+ * bits 24-31: number of beacons (suspend between channels)
+ * @rxon_flags: RXON_FLG_*
+ * @filter_flags: RXON_FILTER_*
+ * @tx_cmd: for active scans (zero for passive), w/o payload,
+ * no RS so specify TX rate
+ * @direct_scan: direct scan SSIDs
+ * @type: one of SCAN_TYPE_*
+ * @repeats: how many time to repeat the scan
+ */
+struct iwl_scan_cmd {
+ __le16 len;
+ u8 scan_flags;
+ u8 channel_count;
+ __le16 quiet_time;
+ __le16 quiet_plcp_th;
+ __le16 passive2active;
+ __le16 rxchain_sel_flags;
+ __le32 max_out_time;
+ __le32 suspend_time;
+ /* RX_ON_FLAGS_API_S_VER_1 */
+ __le32 rxon_flags;
+ __le32 filter_flags;
+ struct iwl_tx_cmd tx_cmd;
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+ __le32 type;
+ __le32 repeats;
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct iwl_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __packed; /* SCAN_REQUEST_FIXED_PART_API_S_VER_5 */
+
+/* Response to scan request contains only status with one of these values */
+#define SCAN_RESPONSE_OK 0x1
+#define SCAN_RESPONSE_ERROR 0x2
+
+/*
+ * SCAN_ABORT_CMD = 0x81
+ * When scan abort is requested, the command has no fields except the common
+ * header. The response contains only a status with one of these values.
+ */
+#define SCAN_ABORT_POSSIBLE 0x1
+#define SCAN_ABORT_IGNORED 0x2 /* no pending scans */
+
+/* TODO: complete documentation */
+#define SCAN_OWNER_STATUS 0x1
+#define MEASURE_OWNER_STATUS 0x2
+
+/**
+ * struct iwl_scan_start_notif - notifies start of scan in the device
+ * ( SCAN_START_NOTIFICATION = 0x82 )
+ * @tsf_low: TSF timer (lower half) in usecs
+ * @tsf_high: TSF timer (higher half) in usecs
+ * @beacon_timer: structured as follows:
+ * bits 0:19 - beacon interval in usecs
+ * bits 20:23 - reserved (0)
+ * bits 24:31 - number of beacons
+ * @channel: which channel is scanned
+ * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
+ * @status: one of *_OWNER_STATUS
+ */
+struct iwl_scan_start_notif {
+ __le32 tsf_low;
+ __le32 tsf_high;
+ __le32 beacon_timer;
+ u8 channel;
+ u8 band;
+ u8 reserved[2];
+ __le32 status;
+} __packed; /* SCAN_START_NTF_API_S_VER_1 */
+
+/* scan results probe_status first bit indicates success */
+#define SCAN_PROBE_STATUS_OK 0
+#define SCAN_PROBE_STATUS_TX_FAILED BIT(0)
+/* error statuses combined with TX_FAILED */
+#define SCAN_PROBE_STATUS_FAIL_TTL BIT(1)
+#define SCAN_PROBE_STATUS_FAIL_BT BIT(2)
+
+/* How many statistics are gathered for each channel */
+#define SCAN_RESULTS_STATISTICS 1
+
+/**
+ * enum iwl_scan_complete_status - status codes for scan complete notifications
+ * @SCAN_COMP_STATUS_OK: scan completed successfully
+ * @SCAN_COMP_STATUS_ABORT: scan was aborted by user
+ * @SCAN_COMP_STATUS_ERR_SLEEP: sending null sleep packet failed
+ * @SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT: timeout before channel is ready
+ * @SCAN_COMP_STATUS_ERR_PROBE: sending probe request failed
+ * @SCAN_COMP_STATUS_ERR_WAKEUP: sending null wakeup packet failed
+ * @SCAN_COMP_STATUS_ERR_ANTENNAS: invalid antennas chosen at scan command
+ * @SCAN_COMP_STATUS_ERR_INTERNAL: internal error caused scan abort
+ * @SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax
+ * @SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful
+ * (not an error!)
+ * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver
+ * asked for
+ * @SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events
+*/
+enum iwl_scan_complete_status {
+ SCAN_COMP_STATUS_OK = 0x1,
+ SCAN_COMP_STATUS_ABORT = 0x2,
+ SCAN_COMP_STATUS_ERR_SLEEP = 0x3,
+ SCAN_COMP_STATUS_ERR_CHAN_TIMEOUT = 0x4,
+ SCAN_COMP_STATUS_ERR_PROBE = 0x5,
+ SCAN_COMP_STATUS_ERR_WAKEUP = 0x6,
+ SCAN_COMP_STATUS_ERR_ANTENNAS = 0x7,
+ SCAN_COMP_STATUS_ERR_INTERNAL = 0x8,
+ SCAN_COMP_STATUS_ERR_COEX = 0x9,
+ SCAN_COMP_STATUS_P2P_ACTION_OK = 0xA,
+ SCAN_COMP_STATUS_ITERATION_END = 0x0B,
+ SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C,
+};
+
+/**
+ * struct iwl_scan_results_notif - scan results for one channel
+ * ( SCAN_RESULTS_NOTIFICATION = 0x83 )
+ * @channel: which channel the results are from
+ * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
+ * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request
+ * @num_probe_not_sent: # of request that weren't sent due to not enough time
+ * @duration: duration spent in channel, in usecs
+ * @statistics: statistics gathered for this channel
+ */
+struct iwl_scan_results_notif {
+ u8 channel;
+ u8 band;
+ u8 probe_status;
+ u8 num_probe_not_sent;
+ __le32 duration;
+ __le32 statistics[SCAN_RESULTS_STATISTICS];
+} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */
+
+/**
+ * struct iwl_scan_complete_notif - notifies end of scanning (all channels)
+ * ( SCAN_COMPLETE_NOTIFICATION = 0x84 )
+ * @scanned_channels: number of channels scanned (and number of valid results)
+ * @status: one of SCAN_COMP_STATUS_*
+ * @bt_status: BT on/off status
+ * @last_channel: last channel that was scanned
+ * @tsf_low: TSF timer (lower half) in usecs
+ * @tsf_high: TSF timer (higher half) in usecs
+ * @results: all scan results, only "scanned_channels" of them are valid
+ */
+struct iwl_scan_complete_notif {
+ u8 scanned_channels;
+ u8 status;
+ u8 bt_status;
+ u8 last_channel;
+ __le32 tsf_low;
+ __le32 tsf_high;
+ struct iwl_scan_results_notif results[MAX_NUM_SCAN_CHANNELS];
+} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */
+
+/* scan offload */
+#define IWL_MAX_SCAN_CHANNELS 40
+#define IWL_SCAN_MAX_BLACKLIST_LEN 64
+#define IWL_SCAN_MAX_PROFILES 11
+#define SCAN_OFFLOAD_PROBE_REQ_SIZE 512
+
+/* Default watchdog (in MS) for scheduled scan iteration */
+#define IWL_SCHED_SCAN_WATCHDOG cpu_to_le16(15000)
+
+#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
+#define CAN_ABORT_STATUS 1
+
+#define IWL_FULL_SCAN_MULTIPLIER 5
+#define IWL_FAST_SCHED_SCAN_ITERATIONS 3
+
+/**
+ * struct iwl_scan_offload_cmd - SCAN_REQUEST_FIXED_PART_API_S_VER_6
+ * @scan_flags: see enum iwl_scan_flags
+ * @channel_count: channels in channel list
+ * @quiet_time: dwell time, in milisiconds, on quiet channel
+ * @quiet_plcp_th: quiet channel num of packets threshold
+ * @good_CRC_th: passive to active promotion threshold
+ * @rx_chain: RXON rx chain.
+ * @max_out_time: max uSec to be out of assoceated channel
+ * @suspend_time: pause scan this long when returning to service channel
+ * @flags: RXON flags
+ * @filter_flags: RXONfilter
+ * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz.
+ * @direct_scan: list of SSIDs for directed active scan
+ * @scan_type: see enum iwl_scan_type.
+ * @rep_count: repetition count for each scheduled scan iteration.
+ */
+struct iwl_scan_offload_cmd {
+ __le16 len;
+ u8 scan_flags;
+ u8 channel_count;
+ __le16 quiet_time;
+ __le16 quiet_plcp_th;
+ __le16 good_CRC_th;
+ __le16 rx_chain;
+ __le32 max_out_time;
+ __le32 suspend_time;
+ /* RX_ON_FLAGS_API_S_VER_1 */
+ __le32 flags;
+ __le32 filter_flags;
+ struct iwl_tx_cmd tx_cmd[2];
+ /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+ __le32 scan_type;
+ __le32 rep_count;
+} __packed;
+
+enum iwl_scan_offload_channel_flags {
+ IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE = BIT(0),
+ IWL_SCAN_OFFLOAD_CHANNEL_NARROW = BIT(22),
+ IWL_SCAN_OFFLOAD_CHANNEL_FULL = BIT(24),
+ IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL = BIT(25),
+};
+
+/**
+ * iwl_scan_channel_cfg - SCAN_CHANNEL_CFG_S
+ * @type: bitmap - see enum iwl_scan_offload_channel_flags.
+ * 0: passive (0) or active (1) scan.
+ * 1-20: directed scan to i'th ssid.
+ * 22: channel width configuation - 1 for narrow.
+ * 24: full scan.
+ * 25: partial scan.
+ * @channel_number: channel number 1-13 etc.
+ * @iter_count: repetition count for the channel.
+ * @iter_interval: interval between two innteration on one channel.
+ * @dwell_time: entry 0 - active scan, entry 1 - passive scan.
+ */
+struct iwl_scan_channel_cfg {
+ __le32 type[IWL_MAX_SCAN_CHANNELS];
+ __le16 channel_number[IWL_MAX_SCAN_CHANNELS];
+ __le16 iter_count[IWL_MAX_SCAN_CHANNELS];
+ __le32 iter_interval[IWL_MAX_SCAN_CHANNELS];
+ u8 dwell_time[IWL_MAX_SCAN_CHANNELS][2];
+} __packed;
+
+/**
+ * iwl_scan_offload_cfg - SCAN_OFFLOAD_CONFIG_API_S
+ * @scan_cmd: scan command fixed part
+ * @channel_cfg: scan channel configuration
+ * @data: probe request frames (one per band)
+ */
+struct iwl_scan_offload_cfg {
+ struct iwl_scan_offload_cmd scan_cmd;
+ struct iwl_scan_channel_cfg channel_cfg;
+ u8 data[0];
+} __packed;
+
+/**
+ * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S
+ * @ssid: MAC address to filter out
+ * @reported_rssi: AP rssi reported to the host
+ */
+struct iwl_scan_offload_blacklist {
+ u8 ssid[ETH_ALEN];
+ u8 reported_rssi;
+ u8 reserved;
+} __packed;
+
+enum iwl_scan_offload_network_type {
+ IWL_NETWORK_TYPE_BSS = 1,
+ IWL_NETWORK_TYPE_IBSS = 2,
+ IWL_NETWORK_TYPE_ANY = 3,
+};
+
+enum iwl_scan_offload_band_selection {
+ IWL_SCAN_OFFLOAD_SELECT_2_4 = 0x4,
+ IWL_SCAN_OFFLOAD_SELECT_5_2 = 0x8,
+ IWL_SCAN_OFFLOAD_SELECT_ANY = 0xc,
+};
+
+/**
+ * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
+ * @ssid_index: index to ssid list in fixed part
+ * @unicast_cipher: encryption olgorithm to match - bitmap
+ * @aut_alg: authentication olgorithm to match - bitmap
+ * @network_type: enum iwl_scan_offload_network_type
+ * @band_selection: enum iwl_scan_offload_band_selection
+ */
+struct iwl_scan_offload_profile {
+ u8 ssid_index;
+ u8 unicast_cipher;
+ u8 auth_alg;
+ u8 network_type;
+ u8 band_selection;
+ u8 reserved[3];
+} __packed;
+
+/**
+ * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
+ * @blaclist: AP list to filter off from scan results
+ * @profiles: profiles to search for match
+ * @blacklist_len: length of blacklist
+ * @num_profiles: num of profiles in the list
+ */
+struct iwl_scan_offload_profile_cfg {
+ struct iwl_scan_offload_blacklist blacklist[IWL_SCAN_MAX_BLACKLIST_LEN];
+ struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES];
+ u8 blacklist_len;
+ u8 num_profiles;
+ u8 reserved[2];
+} __packed;
+
+/**
+ * iwl_scan_offload_schedule - schedule of scan offload
+ * @delay: delay between iterations, in seconds.
+ * @iterations: num of scan iterations
+ * @full_scan_mul: number of partial scans before each full scan
+ */
+struct iwl_scan_offload_schedule {
+ u16 delay;
+ u8 iterations;
+ u8 full_scan_mul;
+} __packed;
+
+/*
+ * iwl_scan_offload_flags
+ *
+ * IWL_SCAN_OFFLOAD_FLAG_FILTER_SSID: filter mode - upload every beacon or match
+ * ssid list.
+ * IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL: add cached channels to partial scan.
+ * IWL_SCAN_OFFLOAD_FLAG_ENERGY_SCAN: use energy based scan before partial scan
+ * on A band.
+ */
+enum iwl_scan_offload_flags {
+ IWL_SCAN_OFFLOAD_FLAG_FILTER_SSID = BIT(0),
+ IWL_SCAN_OFFLOAD_FLAG_CACHED_CHANNEL = BIT(2),
+ IWL_SCAN_OFFLOAD_FLAG_ENERGY_SCAN = BIT(3),
+};
+
+/**
+ * iwl_scan_offload_req - scan offload request command
+ * @flags: bitmap - enum iwl_scan_offload_flags.
+ * @watchdog: maximum scan duration in TU.
+ * @delay: delay in seconds before first iteration.
+ * @schedule_line: scan offload schedule, for fast and regular scan.
+ */
+struct iwl_scan_offload_req {
+ __le16 flags;
+ __le16 watchdog;
+ __le16 delay;
+ __le16 reserved;
+ struct iwl_scan_offload_schedule schedule_line[2];
+} __packed;
+
+enum iwl_scan_offload_compleate_status {
+ IWL_SCAN_OFFLOAD_COMPLETED = 1,
+ IWL_SCAN_OFFLOAD_ABORTED = 2,
+};
+
+/**
+ * iwl_scan_offload_complete - SCAN_OFFLOAD_COMPLETE_NTF_API_S_VER_1
+ * @last_schedule_line: last schedule line executed (fast or regular)
+ * @last_schedule_iteration: last scan iteration executed before scan abort
+ * @status: enum iwl_scan_offload_compleate_status
+ */
+struct iwl_scan_offload_complete {
+ u8 last_schedule_line;
+ u8 last_schedule_iteration;
+ u8 status;
+ u8 reserved;
+} __packed;
+
+#endif
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
