Register mesh PS ops on interface add and de-register on
removal.
When enabling mesh PS, do not enable the hardware's TIM timer
interrupt.
React to mac80211 doze/wakeup calls.
Add a PS status flag PS_MAC80211_CTL to store last mesh PS
command from mac80211.
Signed-off-by: Marco Porsch <marco@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 46 +++++++++++++++++++++++++++++---
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 8250330..f11c210 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -651,6 +651,7 @@ enum sc_op_flags {
#define PS_WAIT_FOR_TX_ACK BIT(3)
#define PS_BEACON_SYNC BIT(4)
#define PS_WAIT_FOR_ANI BIT(5)
+#define PS_MAC80211_CTL BIT(6)
struct ath_rate_table;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 0fb53d6..2929808 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -132,7 +132,8 @@ void ath9k_ps_restore(struct ath_softc *sc)
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK |
- PS_WAIT_FOR_ANI))) {
+ PS_WAIT_FOR_ANI |
+ PS_MAC80211_CTL))) {
mode = ATH9K_PM_NETWORK_SLEEP;
if (ath9k_hw_btcoex_is_enabled(sc->sc_ah))
ath9k_btcoex_stop_gen_timer(sc);
@@ -824,6 +825,38 @@ static void ath9k_stop(struct ieee80211_hw *hw)
ath_dbg(common, CONFIG, "Driver halt\n");
}
+static void ath9k_mesh_doze(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
+ unsigned long flags;
+
+ ath9k_ps_wakeup(sc);
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ /* in mesh mode mac80211 checks beacons and CAB */
+ sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_MAC80211_CTL);
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+ ath9k_ps_restore(sc);
+}
+
+static void ath9k_mesh_wakeup(struct ieee80211_hw *hw)
+{
+ struct ath_softc *sc = hw->priv;
+ unsigned long flags;
+
+ ath9k_ps_wakeup(sc);
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+ sc->ps_flags |= PS_MAC80211_CTL;
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+ ath9k_ps_restore(sc);
+}
+
+static const struct ieee80211_mps_ops ath9k_mesh_ps_ops = {
+ .hw_doze = ath9k_mesh_doze,
+ .hw_wakeup = ath9k_mesh_wakeup,
+};
+
bool ath9k_uses_beacons(int type)
{
switch (type) {
@@ -934,6 +967,11 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
ah->opmode = NL80211_IFTYPE_ADHOC;
else
ah->opmode = NL80211_IFTYPE_STATION;
+
+ if (ah->opmode == NL80211_IFTYPE_MESH_POINT)
+ ieee80211_mps_init(hw, &ath9k_mesh_ps_ops);
+ else if (old_opmode == NL80211_IFTYPE_MESH_POINT)
+ ieee80211_mps_init(hw, NULL);
}
ath9k_hw_setopmode(ah);
@@ -1037,7 +1075,9 @@ static void ath9k_enable_ps(struct ath_softc *sc)
struct ath_common *common = ath9k_hw_common(ah);
sc->ps_enabled = true;
- if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
+ if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP) &&
+ sc->sc_ah->opmode != NL80211_IFTYPE_MESH_POINT) {
+ /* in mesh mode we trigger wakeups from mac80211 */
if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
ah->imask |= ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(ah);
@@ -1178,7 +1218,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
* We just prepare to enable PS. We have to wait until our AP has
* ACK'd our null data frame to disable RX otherwise we'll ignore
* those ACKs and end up retransmitting the same null data frames.
- * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
+ * IEEE80211_CONF_CHANGE_PS is passed by mac80211 for STA or mesh mode.
*/
if (changed & IEEE80211_CONF_CHANGE_PS) {
unsigned long flags;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
