The external iwlwifi driver comes with a README file that is referenced by the Kconfig. This README is not present in the driver included in the kernel. Remove references to this documentation. Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx> Acked-by: Tomas Winkler <tomas.winkler@xxxxxxxxx> --- drivers/net/wireless/iwlwifi/Kconfig | 20 ++++++++------------ 1 files changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 66ca942..d1af938 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -9,17 +9,15 @@ config IWL4965 This driver uses the kernel's mac80211 subsystem. - See <file:Documentation/networking/README.iwlwifi> for - information on the capabilities currently enabled in this - driver and for tips for debugging any issues or problems. - In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: <http://intellinuxwireless.org/>. - See the above referenced README.iwlwifi for information on where - to install the microcode images. + The microcode is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. If you want to compile the driver as a module ( = code which can be inserted in and remvoed from the running kernel whenever you want), @@ -92,17 +90,15 @@ config IWL3945 This driver uses the kernel's mac80211 subsystem. - See <file:Documentation/networking/README.iwlwifi> for - information on the capabilities currently enabled in this - driver and for tips for debugging any issues or problems. - In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: <http://intellinuxwireless.org/>. - See the above referenced README.iwlwifi for information on where - to install the microcode images. + The microcode is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. If you want to compile the driver as a module ( = code which can be inserted in and remvoed from the running kernel whenever you want), -- 1.5.3.4 - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
