From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
For AR9550, program the synth value based on the ref. clock.
The logic for AR9550 is similar to AR9330, but keep the code
separate since changes for AR9330 are required - which would be
done later.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 31 ++++++++++++++++-------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index ce19c09..0c4c5a6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -68,7 +68,7 @@ static const int m2ThreshExt_off = 127;
static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
{
u16 bMode, fracMode = 0, aModeRefSel = 0;
- u32 freq, channelSel = 0, reg32 = 0;
+ u32 freq, chan_frac, div, channelSel = 0, reg32 = 0;
struct chan_centers centers;
int loadSynthChannel;
@@ -77,9 +77,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
if (freq < 4800) { /* 2 GHz, fractional mode */
if (AR_SREV_9330(ah)) {
- u32 chan_frac;
- u32 div;
-
if (ah->is_clk_25mhz)
div = 75;
else
@@ -89,34 +86,40 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
chan_frac = (((freq * 4) % div) * 0x20000) / div;
channelSel = (channelSel << 17) | chan_frac;
} else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) {
- u32 chan_frac;
-
/*
- * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
+ * freq_ref = 40 / (refdiva >> amoderefsel);
+ * where refdiva=1 and amoderefsel=0
* ndiv = ((chan_mhz * 4) / 3) / freq_ref;
* chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
*/
channelSel = (freq * 4) / 120;
chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
channelSel = (channelSel << 17) | chan_frac;
- } else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+ } else if (AR_SREV_9340(ah)) {
if (ah->is_clk_25mhz) {
- u32 chan_frac;
-
channelSel = (freq * 2) / 75;
chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
channelSel = (channelSel << 17) | chan_frac;
- } else
+ } else {
channelSel = CHANSEL_2G(freq) >> 1;
- } else
+ }
+ } else if (AR_SREV_9550(ah)) {
+ if (ah->is_clk_25mhz)
+ div = 75;
+ else
+ div = 120;
+
+ channelSel = (freq * 4) / div;
+ chan_frac = (((freq * 4) % div) * 0x20000) / div;
+ channelSel = (channelSel << 17) | chan_frac;
+ } else {
channelSel = CHANSEL_2G(freq);
+ }
/* Set to 2G mode */
bMode = 1;
} else {
if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) &&
ah->is_clk_25mhz) {
- u32 chan_frac;
-
channelSel = freq / 75;
chan_frac = ((freq % 75) * 0x20000) / 75;
channelSel = (channelSel << 17) | chan_frac;
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
