From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
IQ calibration doesn't complete and times out for half/quarter
rates, so skip it correctly.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index fa67e84..61caf1c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1013,7 +1013,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
}
}
- if (!(ah->enabled_cals & TX_IQ_CAL))
+ if ((IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) ||
+ !(ah->enabled_cals & TX_IQ_CAL))
goto skip_tx_iqcal;
/* Do Tx IQ Calibration */
@@ -1040,12 +1041,10 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal)
ar9003_mci_init_cal_req(ah, &is_reusable);
- if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) {
- txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
- udelay(5);
- REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
- }
+ txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+ udelay(5);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
skip_tx_iqcal:
if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
