From: Avinash Patil <patila@xxxxxxxxxxx>
This patch adds support for init_fw_port handler for PCIe
interface, which resets RXBD read pointer for PCIe.
This fixes issue where RX doesn't work until some TX from
driver happens.
Signed-off-by: Avinash Patil <patila@xxxxxxxxxxx>
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
---
drivers/net/wireless/mwifiex/init.c | 6 ++++++
drivers/net/wireless/mwifiex/main.h | 1 +
drivers/net/wireless/mwifiex/pcie.c | 20 ++++++++++++++++++--
3 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 39f03ce..e00b806 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -591,6 +591,12 @@ int mwifiex_init_fw(struct mwifiex_adapter *adapter)
return -1;
}
}
+
+ if (adapter->if_ops.init_fw_port) {
+ if (adapter->if_ops.init_fw_port(adapter))
+ return -1;
+ }
+
for (i = 0; i < adapter->priv_num; i++) {
if (adapter->priv[i]) {
ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index d717c98..ef02a5b 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -599,6 +599,7 @@ struct mwifiex_if_ops {
int (*cmdrsp_complete) (struct mwifiex_adapter *, struct sk_buff *);
int (*event_complete) (struct mwifiex_adapter *, struct sk_buff *);
int (*data_complete) (struct mwifiex_adapter *, struct sk_buff *);
+ int (*init_fw_port) (struct mwifiex_adapter *);
int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *);
void (*card_reset) (struct mwifiex_adapter *);
};
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index e4c2cfd..191c682 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -966,8 +966,23 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
return 0;
}
-/*
- * This function downloads commands to the device
+/* This function init rx port in firmware which in turn enables to receive data
+ * from device before transmitting any packet.
+ */
+static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter)
+{
+ struct pcie_service_card *card = adapter->card;
+
+ /* Write the RX ring read pointer in to REG_RXBD_RDPTR */
+ if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, card->rxbd_rdptr | 0)) {
+ dev_err(adapter->dev,
+ "RECV DATA: failed to write REG_RXBD_RDPTR\n");
+ return -1;
+ }
+ return 0;
+}
+
+/* This function downloads commands to the device
*/
static int
mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb)
@@ -1899,6 +1914,7 @@ static struct mwifiex_if_ops pcie_ops = {
.event_complete = mwifiex_pcie_event_complete,
.update_mp_end_port = NULL,
.cleanup_mpa_buf = NULL,
+ .init_fw_port = mwifiex_pcie_init_fw_port,
};
/*
--
1.7.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
