Currently, we have 2 ampdu streams that can be created
simultaneously. Firmware is capable of supporting
additional streams. Add support to use these streams.
Signed-off-by: Nishant Sarmukadam <nishants@xxxxxxxxxxx>
Signed-off-by: Yogesh Ashok Powar <yogeshp@xxxxxxxxxxx>
---
drivers/net/wireless/mwl8k.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index c9c9c99..704d7d3 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -101,6 +101,18 @@ MODULE_PARM_DESC(ap_mode_default,
#define MWL8K_MAX_TX_QUEUES (MWL8K_TX_WMM_QUEUES + MWL8K_MAX_AMPDU_QUEUES)
#define mwl8k_tx_queues(priv) (MWL8K_TX_WMM_QUEUES + (priv)->num_ampdu_queues)
+/* txpriorities are mapped with hw queues.
+ * Each hw queue has a txpriority.
+ */
+#define TOTAL_HW_TX_QUEUES 8
+
+/* Each HW queue can have one AMPDU stream.
+ * But, because one of the hw queue is reserved,
+ * maximum AMPDU queues that can be created are
+ * one short of total tx queues.
+ */
+#define MWL8K_NUM_AMPDU_STREAMS (TOTAL_HW_TX_QUEUES - 1)
+
struct rxd_ops {
int rxd_size;
void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr);
@@ -1733,7 +1745,7 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid)
struct mwl8k_priv *priv = hw->priv;
int i;
- for (i = 0; i < priv->num_ampdu_queues; i++) {
+ for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) {
stream = &priv->ampdu[i];
if (stream->state == AMPDU_NO_STREAM) {
stream->sta = sta;
@@ -1780,7 +1792,7 @@ mwl8k_lookup_stream(struct ieee80211_hw *hw, u8 *addr, u8 tid)
struct mwl8k_priv *priv = hw->priv;
int i;
- for (i = 0 ; i < priv->num_ampdu_queues; i++) {
+ for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) {
struct mwl8k_ampdu_stream *stream;
stream = &priv->ampdu[i];
if (stream->state == AMPDU_NO_STREAM)
@@ -1827,6 +1839,13 @@ static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid)
tx_stats->pkts++;
}
+/* The hardware ampdu queues start from 5.
+ * txpriorities for ampdu queues are
+ * 5 6 7 0 1 2 3 4 ie., queue 5 is highest
+ * and queue 3 is lowest (queue 4 is reserved)
+ */
+#define BA_QUEUE 5
+
static void
mwl8k_txq_xmit(struct ieee80211_hw *hw,
int index,
@@ -1927,8 +1946,12 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw,
if (stream != NULL) {
if (stream->state == AMPDU_STREAM_ACTIVE) {
WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK));
- txpriority = stream->idx + MWL8K_TX_WMM_QUEUES;
- index = stream->idx + MWL8K_TX_WMM_QUEUES;
+ txpriority = (BA_QUEUE + stream->idx) %
+ TOTAL_HW_TX_QUEUES;
+ if (stream->idx <= 1)
+ index = stream->idx +
+ MWL8K_TX_WMM_QUEUES;
+
} else if (stream->state == AMPDU_STREAM_NEW) {
/* We get here if the driver sends us packets
* after we've initiated a stream, but before
--
1.8.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
