Hi, (resending in plain text to have message accepted by linux-wireless) On Wed, Jan 2, 2013 at 5:05 PM, John W. Linville <linville@xxxxxxxxxxxxx> wrote: > > On Wed, Jan 02, 2013 at 01:53:19PM +0100, Jörg-Volker Peetz wrote: > > Hallo and happy new year. Happy new year to you too!! > > > > > With kernel 3.7 the wireless adapter in my MSI MS-1013 notebook stops working > > and I see the following warning while booting: > > > > ---%<--- > > cfg80211: Calling CRDA to update world regulatory domain > > ------------[ cut here ]------------ > > WARNING: at net/wireless/core.c:389 wiphy_register+0x5c0/0x600 [cfg80211]() > > Hardware name: MS-1013 > > Modules linked in: rt2500pci(+) eeprom_93cx6 rt2x00pci rt2x00lib mac80211 > > cfg80211 8250_pci 8250_core serial_core fuse snd_atiixp snd_atiixp_modem > > snd_ac97_codec snd_pcm snd_page_alloc ac97_bus snd_seq snd_seq_device snd_timer > > snd sdhci_pci 8139too soundcore sdhci mii pcmcia psmouse k8temp [last unloaded: > > eeprom_93cx6] > > Pid: 10614, comm: modprobe Tainted: G W 3.7.1 #1 > > Call Trace: > > [<ffffffff81027c19>] ? warn_slowpath_common+0x79/0xc0 > > [<ffffffffa02bd160>] ? wiphy_register+0x5c0/0x600 [cfg80211] > > [<ffffffffa0335112>] ? rt2x00queue_allocate+0x42/0x180 [rt2x00lib] > > [<ffffffff81098d04>] ? __kmalloc+0xe4/0x130 > > [<ffffffff81098d04>] ? __kmalloc+0xe4/0x130 > > [<ffffffffa02edc57>] ? ieee80211_register_hw+0x347/0x6d0 [mac80211] > > [<ffffffffa03322ed>] ? rt2x00lib_probe_dev+0x53d/0x720 [rt2x00lib] > > [<ffffffffa033f888>] ? rt2x00pci_probe+0x168/0x2e4 [rt2x00pci] > > [<ffffffff8117c0b0>] ? pci_device_probe+0xd0/0x170 > > [<ffffffff81292b74>] ? driver_probe_device+0x64/0x210 > > [<ffffffff81292db3>] ? __driver_attach+0x93/0xa0 > > [<ffffffff81292d20>] ? driver_probe_device+0x210/0x210 > > [<ffffffff812911d5>] ? bus_for_each_dev+0x45/0x80 > > [<ffffffff81292310>] ? bus_add_driver+0x170/0x250 > > [<ffffffff8129338e>] ? driver_register+0x6e/0x170 > > [<ffffffff81045a24>] ? notifier_call_chain+0x44/0x60 > > [<ffffffffa034e000>] ? 0xffffffffa034dfff > > [<ffffffff810002ca>] ? do_one_initcall+0x11a/0x160 > > [<ffffffff8105b9a6>] ? sys_init_module+0x76/0x1c0 > > [<ffffffff813cae10>] ? system_call_fastpath+0x16/0x1b > > ---[ end trace 5c109ae70c3f9955 ]--- > > phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw. > > rt2500pci: probe of 0000:02:09.0 failed with error -22 > > --->%--- > > > > and the module rt2500pci fails to load. > > > > The kernel config is appended. > > -- > > Regards, > > Jörg-Volker. > > It is probably better to send to linux-wireless@xxxxxxxxxxxxxxx instead... > > Does this happen every time? If not, what circumstances contribute to it? > > What version of the kernel were you using previously? > This is caused by the introduction of interface combinations. Helmut Schaa has already submitted a patch to fix this, but this has unfortunately not ended up in 3.7. I'm confident it will end up in one of the upcoming 3.7.x stable releases. See http://marc.info/?l=linux-wireless&m=135478723823922&w=2 for the patch submitted by Helmut. --- Gertjan -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
