From: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Set bitrate_mask is not desired anymore. The firmware will
determine the correct rates to be used.
Reviewed-by: Arend Van Spriel <arend@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Signed-off-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 62 --------------------
1 file changed, 62 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 1261a9b..ee4eb44 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -2011,67 +2011,6 @@ done:
return err;
}
-static s32
-brcmf_cfg80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *ndev,
- const u8 *addr,
- const struct cfg80211_bitrate_mask *mask)
-{
- struct brcmf_if *ifp = netdev_priv(ndev);
- struct brcm_rateset_le rateset_le;
- s32 rate;
- s32 val;
- s32 err_bg;
- s32 err_a;
- u32 legacy;
- s32 err = 0;
-
- brcmf_dbg(TRACE, "Enter\n");
- if (!check_vif_up(ifp->vif))
- return -EIO;
-
- /* addr param is always NULL. ignore it */
- /* Get current rateset */
- err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CURR_RATESET,
- &rateset_le, sizeof(rateset_le));
- if (err) {
- brcmf_err("could not get current rateset (%d)\n", err);
- goto done;
- }
-
- legacy = ffs(mask->control[IEEE80211_BAND_2GHZ].legacy & 0xFFFF);
- if (!legacy)
- legacy = ffs(mask->control[IEEE80211_BAND_5GHZ].legacy &
- 0xFFFF);
-
- val = wl_g_rates[legacy - 1].bitrate * 100000;
-
- if (val < le32_to_cpu(rateset_le.count))
- /* Select rate by rateset index */
- rate = rateset_le.rates[val] & 0x7f;
- else
- /* Specified rate in bps */
- rate = val / 500000;
-
- brcmf_dbg(CONN, "rate %d mbps\n", rate / 2);
-
- /*
- *
- * Set rate override,
- * Since the is a/b/g-blind, both a/bg_rate are enforced.
- */
- err_bg = brcmf_fil_iovar_int_set(ifp, "bg_rate", rate);
- err_a = brcmf_fil_iovar_int_set(ifp, "a_rate", rate);
- if (err_bg && err_a) {
- brcmf_err("could not set fixed rate (%d) (%d)\n", err_bg,
- err_a);
- err = err_bg | err_a;
- }
-
-done:
- brcmf_dbg(TRACE, "Exit\n");
- return err;
-}
-
static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg,
struct brcmf_bss_info_le *bi)
{
@@ -3703,7 +3642,6 @@ static struct cfg80211_ops wl_cfg80211_ops = {
.set_default_key = brcmf_cfg80211_config_default_key,
.set_default_mgmt_key = brcmf_cfg80211_config_default_mgmt_key,
.set_power_mgmt = brcmf_cfg80211_set_power_mgmt,
- .set_bitrate_mask = brcmf_cfg80211_set_bitrate_mask,
.connect = brcmf_cfg80211_connect,
.disconnect = brcmf_cfg80211_disconnect,
.suspend = brcmf_cfg80211_suspend,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
