As with many other facets of this driver, there may be a simpler way to
do this, but I haven't invested any time here as things basically work.
Signed-off-by: Solomon Peachy <pizza@xxxxxxxxxxxx>
---
drivers/staging/cw1200/scan.c | 462 ++++++++++++++++++++++++++++++++++++++++++
drivers/staging/cw1200/scan.h | 55 +++++
2 files changed, 517 insertions(+)
create mode 100644 drivers/staging/cw1200/scan.c
create mode 100644 drivers/staging/cw1200/scan.h
diff --git a/drivers/staging/cw1200/scan.c b/drivers/staging/cw1200/scan.c
new file mode 100644
index 0000000..0e530e5
--- /dev/null
+++ b/drivers/staging/cw1200/scan.c
@@ -0,0 +1,462 @@
+/*
+ * Scan implementation for ST-Ericsson CW1200 mac80211 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include "cw1200.h"
+#include "scan.h"
+#include "sta.h"
+#include "pm.h"
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv);
+
+static int cw1200_scan_start(struct cw1200_common *priv, struct wsm_scan *scan)
+{
+ int ret, i;
+ int tmo = 2000;
+
+ for (i = 0; i < scan->numOfChannels; ++i)
+ tmo += scan->ch[i].maxChannelTime + 10;
+
+ atomic_set(&priv->scan.in_progress, 1);
+#ifdef CONFIG_CW1200_PM
+ cw1200_pm_stay_awake(&priv->pm_state, tmo * HZ / 1000);
+#endif
+ queue_delayed_work(priv->workqueue, &priv->scan.timeout,
+ tmo * HZ / 1000);
+ ret = wsm_scan(priv, scan);
+ if (unlikely(ret)) {
+ atomic_set(&priv->scan.in_progress, 0);
+ cancel_delayed_work_sync(&priv->scan.timeout);
+ cw1200_scan_restart_delayed(priv);
+ }
+ return ret;
+}
+
+int cw1200_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req)
+{
+ struct cw1200_common *priv = hw->priv;
+ struct wsm_template_frame frame = {
+ .frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+ };
+ int i;
+
+ if (!priv->vif)
+ return -EINVAL;
+
+ /* Scan when P2P_GO corrupt firmware MiniAP mode */
+ if (priv->join_status == CW1200_JOIN_STATUS_AP)
+ return -EOPNOTSUPP;
+
+ if (req->n_ssids == 1 && !req->ssids[0].ssid_len)
+ req->n_ssids = 0;
+
+ wiphy_dbg(hw->wiphy, "[SCAN] Scan request for %d SSIDs.\n",
+ req->n_ssids);
+
+ if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
+ return -EINVAL;
+
+ frame.skb = ieee80211_probereq_get(hw, priv->vif, NULL, 0,
+ req->ie, req->ie_len);
+ if (!frame.skb)
+ return -ENOMEM;
+
+ /* will be unlocked in cw1200_scan_work() */
+ down(&priv->scan.lock);
+ mutex_lock(&priv->conf_mutex);
+ if (frame.skb) {
+ int ret = wsm_set_template_frame(priv, &frame);
+ if (0 == ret) {
+ /*
+ * set empty probe response template in order
+ * to receive probe requests from firmware
+ */
+ frame.frame_type = WSM_FRAME_TYPE_PROBE_RESPONSE;
+ frame.disable = true;
+ ret = wsm_set_template_frame(priv, &frame);
+ }
+ if (ret) {
+ mutex_unlock(&priv->conf_mutex);
+ up(&priv->scan.lock);
+ dev_kfree_skb(frame.skb);
+ return ret;
+ }
+ }
+
+ wsm_lock_tx(priv);
+
+ BUG_ON(priv->scan.req);
+ priv->scan.req = req;
+ priv->scan.n_ssids = 0;
+ priv->scan.status = 0;
+ priv->scan.begin = &req->channels[0];
+ priv->scan.curr = priv->scan.begin;
+ priv->scan.end = &req->channels[req->n_channels];
+ priv->scan.output_power = priv->output_power;
+
+ for (i = 0; i < req->n_ssids; ++i) {
+ struct wsm_ssid *dst =
+ &priv->scan.ssids[priv->scan.n_ssids];
+ BUG_ON(req->ssids[i].ssid_len > sizeof(dst->ssid));
+ memcpy(&dst->ssid[0], req->ssids[i].ssid,
+ sizeof(dst->ssid));
+ dst->length = req->ssids[i].ssid_len;
+ ++priv->scan.n_ssids;
+ }
+
+ mutex_unlock(&priv->conf_mutex);
+
+ if (frame.skb)
+ dev_kfree_skb(frame.skb);
+ queue_work(priv->workqueue, &priv->scan.work);
+ return 0;
+}
+
+void cw1200_scan_work(struct work_struct *work)
+{
+ struct cw1200_common *priv = container_of(work, struct cw1200_common,
+ scan.work);
+ struct ieee80211_channel **it;
+ struct wsm_scan scan = {
+ .scanType = WSM_SCAN_TYPE_FOREGROUND,
+ .scanFlags = WSM_SCAN_FLAG_SPLIT_METHOD,
+ };
+ bool first_run = priv->scan.begin == priv->scan.curr &&
+ priv->scan.begin != priv->scan.end;
+ int i;
+
+ if (first_run) {
+ /* Firmware gets crazy if scan request is sent
+ * when STA is joined but not yet associated.
+ * Force unjoin in this case. */
+ if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
+ cw1200_join_timeout(&priv->join_timeout.work);
+ }
+
+ mutex_lock(&priv->conf_mutex);
+
+ if (first_run) {
+ if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+ !(priv->powersave_mode.pmMode & WSM_PSM_PS)) {
+ struct wsm_set_pm pm = priv->powersave_mode;
+ pm.pmMode = WSM_PSM_PS;
+ cw1200_set_pm(priv, &pm);
+ } else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+ /* FW bug: driver has to restart p2p-dev mode
+ * after scan */
+ cw1200_disable_listening(priv);
+ }
+ }
+
+ if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
+ if (priv->scan.output_power != priv->output_power)
+ WARN_ON(wsm_set_output_power(priv,
+ priv->output_power * 10));
+ if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+ !(priv->powersave_mode.pmMode & WSM_PSM_PS))
+ cw1200_set_pm(priv, &priv->powersave_mode);
+
+ if (priv->scan.status < 0)
+ wiphy_dbg(priv->hw->wiphy,
+ "[SCAN] Scan failed (%d).\n",
+ priv->scan.status);
+ else if (priv->scan.req)
+ wiphy_dbg(priv->hw->wiphy,
+ "[SCAN] Scan completed.\n");
+ else
+ wiphy_dbg(priv->hw->wiphy,
+ "[SCAN] Scan canceled.\n");
+
+ priv->scan.req = NULL;
+ cw1200_scan_restart_delayed(priv);
+ wsm_unlock_tx(priv);
+ mutex_unlock(&priv->conf_mutex);
+ ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0);
+ up(&priv->scan.lock);
+ return;
+ } else {
+ struct ieee80211_channel *first = *priv->scan.curr;
+ for (it = priv->scan.curr + 1, i = 1;
+ it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
+ ++it, ++i) {
+ if ((*it)->band != first->band)
+ break;
+ if (((*it)->flags ^ first->flags) &
+ IEEE80211_CHAN_PASSIVE_SCAN)
+ break;
+ if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+ (*it)->max_power != first->max_power)
+ break;
+ }
+ scan.band = first->band;
+
+ if (priv->scan.req->no_cck)
+ scan.maxTransmitRate = WSM_TRANSMIT_RATE_6;
+ else
+ scan.maxTransmitRate = WSM_TRANSMIT_RATE_1;
+ /* TODO: Is it optimal? */
+ scan.numOfProbeRequests =
+ (first->flags & IEEE80211_CHAN_PASSIVE_SCAN) ? 0 : 2;
+ scan.numOfSSIDs = priv->scan.n_ssids;
+ scan.ssids = &priv->scan.ssids[0];
+ scan.numOfChannels = it - priv->scan.curr;
+ /* TODO: Is it optimal? */
+ scan.probeDelay = 100;
+ /* It is not stated in WSM specification, however
+ * FW team says that driver may not use FG scan
+ * when joined. */
+ if (priv->join_status == CW1200_JOIN_STATUS_STA) {
+ scan.scanType = WSM_SCAN_TYPE_BACKGROUND;
+ scan.scanFlags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+ }
+ scan.ch = kzalloc(
+ sizeof(struct wsm_scan_ch[it - priv->scan.curr]),
+ GFP_KERNEL);
+ if (!scan.ch) {
+ priv->scan.status = -ENOMEM;
+ goto fail;
+ }
+ for (i = 0; i < scan.numOfChannels; ++i) {
+ scan.ch[i].number = priv->scan.curr[i]->hw_value;
+ scan.ch[i].minChannelTime = 50;
+ scan.ch[i].maxChannelTime = 110;
+ }
+ if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+ priv->scan.output_power != first->max_power) {
+ priv->scan.output_power = first->max_power;
+ WARN_ON(wsm_set_output_power(priv,
+ priv->scan.output_power * 10));
+ }
+ priv->scan.status = cw1200_scan_start(priv, &scan);
+ kfree(scan.ch);
+ if (priv->scan.status)
+ goto fail;
+ priv->scan.curr = it;
+ }
+ mutex_unlock(&priv->conf_mutex);
+ return;
+
+fail:
+ priv->scan.curr = priv->scan.end;
+ mutex_unlock(&priv->conf_mutex);
+ queue_work(priv->workqueue, &priv->scan.work);
+ return;
+}
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv)
+{
+ if (priv->delayed_link_loss) {
+ int tmo = priv->cqm_beacon_loss_count;
+
+ if (priv->scan.direct_probe)
+ tmo = 0;
+
+ priv->delayed_link_loss = 0;
+ /* Restart beacon loss timer and requeue
+ BSS loss work. */
+ wiphy_dbg(priv->hw->wiphy,
+ "[CQM] Requeue BSS loss in %d "
+ "beacons.\n", tmo);
+ spin_lock(&priv->bss_loss_lock);
+ priv->bss_loss_status = CW1200_BSS_LOSS_NONE;
+ spin_unlock(&priv->bss_loss_lock);
+ cancel_delayed_work_sync(&priv->bss_loss_work);
+ queue_delayed_work(priv->workqueue,
+ &priv->bss_loss_work,
+ tmo * HZ / 10);
+ }
+
+ /* FW bug: driver has to restart p2p-dev mode after scan. */
+ if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+ cw1200_enable_listening(priv);
+ cw1200_update_filtering(priv);
+ }
+
+ if (priv->delayed_unjoin) {
+ priv->delayed_unjoin = false;
+ if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0)
+ wsm_unlock_tx(priv);
+ }
+}
+
+static void cw1200_scan_complete(struct cw1200_common *priv)
+{
+ if (priv->scan.direct_probe) {
+ wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe complete.\n");
+ cw1200_scan_restart_delayed(priv);
+ priv->scan.direct_probe = 0;
+ up(&priv->scan.lock);
+ wsm_unlock_tx(priv);
+ } else {
+ cw1200_scan_work(&priv->scan.work);
+ }
+}
+
+void cw1200_scan_failed_cb(struct cw1200_common *priv)
+{
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ /* STA is stopped. */
+ return;
+
+ if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+ priv->scan.status = -EIO;
+ queue_delayed_work(priv->workqueue,
+ &priv->scan.timeout, 0);
+ }
+}
+
+
+void cw1200_scan_complete_cb(struct cw1200_common *priv,
+ struct wsm_scan_complete *arg)
+{
+ if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED))
+ /* STA is stopped. */
+ return;
+
+ if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+ priv->scan.status = 1;
+ queue_delayed_work(priv->workqueue,
+ &priv->scan.timeout, 0);
+ }
+}
+
+void cw1200_scan_timeout(struct work_struct *work)
+{
+ struct cw1200_common *priv =
+ container_of(work, struct cw1200_common, scan.timeout.work);
+ if (likely(atomic_xchg(&priv->scan.in_progress, 0))) {
+ if (priv->scan.status > 0)
+ priv->scan.status = 0;
+ else if (!priv->scan.status) {
+ wiphy_warn(priv->hw->wiphy,
+ "Timeout waiting for scan "
+ "complete notification.\n");
+ priv->scan.status = -ETIMEDOUT;
+ priv->scan.curr = priv->scan.end;
+ WARN_ON(wsm_stop_scan(priv));
+ }
+ cw1200_scan_complete(priv);
+ }
+}
+
+void cw1200_probe_work(struct work_struct *work)
+{
+ struct cw1200_common *priv =
+ container_of(work, struct cw1200_common, scan.probe_work.work);
+ u8 queueId = cw1200_queue_get_queue_id(priv->pending_frame_id);
+ struct cw1200_queue *queue = &priv->tx_queue[queueId];
+ const struct cw1200_txpriv *txpriv;
+ struct wsm_tx *wsm;
+ struct wsm_template_frame frame = {
+ .frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+ };
+ struct wsm_ssid ssids[1] = {{
+ .length = 0,
+ } };
+ struct wsm_scan_ch ch[1] = {{
+ .minChannelTime = 0,
+ .maxChannelTime = 10,
+ } };
+ struct wsm_scan scan = {
+ .scanType = WSM_SCAN_TYPE_FOREGROUND,
+ .numOfProbeRequests = 1,
+ .probeDelay = 0,
+ .numOfChannels = 1,
+ .ssids = ssids,
+ .ch = ch,
+ };
+ u8 *ies;
+ size_t ies_len;
+ int ret;
+
+ wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe work.\n");
+
+ BUG_ON(queueId >= 4);
+ BUG_ON(!priv->channel);
+
+ mutex_lock(&priv->conf_mutex);
+ if (unlikely(down_trylock(&priv->scan.lock))) {
+ /* Scan is already in progress. Requeue self. */
+ schedule();
+ queue_delayed_work(priv->workqueue,
+ &priv->scan.probe_work, HZ / 10);
+ mutex_unlock(&priv->conf_mutex);
+ return;
+ }
+
+ if (cw1200_queue_get_skb(queue, priv->pending_frame_id,
+ &frame.skb, &txpriv)) {
+ up(&priv->scan.lock);
+ mutex_unlock(&priv->conf_mutex);
+ wsm_unlock_tx(priv);
+ return;
+ }
+ wsm = (struct wsm_tx *)frame.skb->data;
+ scan.maxTransmitRate = wsm->maxTxRate;
+ scan.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+ WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
+ if (priv->join_status == CW1200_JOIN_STATUS_STA) {
+ scan.scanType = WSM_SCAN_TYPE_BACKGROUND;
+ scan.scanFlags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+ }
+ ch[0].number = priv->channel->hw_value;
+
+ skb_pull(frame.skb, txpriv->offset);
+
+ ies = &frame.skb->data[sizeof(struct ieee80211_hdr_3addr)];
+ ies_len = frame.skb->len - sizeof(struct ieee80211_hdr_3addr);
+
+ if (ies_len) {
+ u8 *ssidie =
+ (u8 *)cfg80211_find_ie(WLAN_EID_SSID, ies, ies_len);
+ if (ssidie && ssidie[1] && ssidie[1] <= sizeof(ssids[0].ssid)) {
+ u8 *nextie = &ssidie[2 + ssidie[1]];
+ /* Remove SSID from the IE list. It has to be provided
+ * as a separate argument in cw1200_scan_start call */
+
+ /* Store SSID localy */
+ ssids[0].length = ssidie[1];
+ memcpy(ssids[0].ssid, &ssidie[2], ssids[0].length);
+ scan.numOfSSIDs = 1;
+
+ /* Remove SSID from IE list */
+ ssidie[1] = 0;
+ memmove(&ssidie[2], nextie, &ies[ies_len] - nextie);
+ skb_trim(frame.skb, frame.skb->len - ssids[0].length);
+ }
+ }
+
+ /* FW bug: driver has to restart p2p-dev mode after scan */
+ if (priv->join_status == CW1200_JOIN_STATUS_MONITOR)
+ cw1200_disable_listening(priv);
+ ret = WARN_ON(wsm_set_template_frame(priv, &frame));
+ priv->scan.direct_probe = 1;
+ if (!ret) {
+ wsm_flush_tx(priv);
+ ret = WARN_ON(cw1200_scan_start(priv, &scan));
+ }
+ mutex_unlock(&priv->conf_mutex);
+
+ skb_push(frame.skb, txpriv->offset);
+ if (!ret)
+ IEEE80211_SKB_CB(frame.skb)->flags |= IEEE80211_TX_STAT_ACK;
+ BUG_ON(cw1200_queue_remove(queue, priv->pending_frame_id));
+
+ if (ret) {
+ priv->scan.direct_probe = 0;
+ up(&priv->scan.lock);
+ wsm_unlock_tx(priv);
+ }
+
+ return;
+}
diff --git a/drivers/staging/cw1200/scan.h b/drivers/staging/cw1200/scan.h
new file mode 100644
index 0000000..6f51da4
--- /dev/null
+++ b/drivers/staging/cw1200/scan.h
@@ -0,0 +1,55 @@
+/*
+ * Scan interface for ST-Ericsson CW1200 mac80211 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SCAN_H_INCLUDED
+#define SCAN_H_INCLUDED
+
+#include <linux/semaphore.h>
+#include "wsm.h"
+
+/* external */ struct sk_buff;
+/* external */ struct cfg80211_scan_request;
+/* external */ struct ieee80211_channel;
+/* external */ struct ieee80211_hw;
+/* external */ struct work_struct;
+
+struct cw1200_scan {
+ struct semaphore lock;
+ struct work_struct work;
+ struct delayed_work timeout;
+ struct cfg80211_scan_request *req;
+ struct ieee80211_channel **begin;
+ struct ieee80211_channel **curr;
+ struct ieee80211_channel **end;
+ struct wsm_ssid ssids[WSM_SCAN_MAX_NUM_OF_SSIDS];
+ int output_power;
+ int n_ssids;
+ int status;
+ atomic_t in_progress;
+ /* Direct probe requests workaround */
+ struct delayed_work probe_work;
+ int direct_probe;
+};
+
+int cw1200_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req);
+void cw1200_scan_work(struct work_struct *work);
+void cw1200_scan_timeout(struct work_struct *work);
+void cw1200_scan_complete_cb(struct cw1200_common *priv,
+ struct wsm_scan_complete *arg);
+void cw1200_scan_failed_cb(struct cw1200_common *priv);
+
+/* ******************************************************************** */
+/* Raw probe requests TX workaround */
+void cw1200_probe_work(struct work_struct *work);
+
+#endif
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
