On Sat, 12 Jan 2008 19:23:53 +0100 Hauke Mehrtens <hauke@xxxxxxxxxx> wrote: > I have tried wireless-2.6 and I have the same problem. If the rate goes > over 11M no TCP/IP traffic goes through the wireless connecting. If rate > is set to auto and the rate control algorithm changes it to something > less than 11M TCP/IP traffic goes through, but if it is more than 11M no > TCP/IP traffic goes through the wireless link. And this is a problem if the rate control algorithm often sets the rate to more than 11M even if connection is unreliable at that rate. Does this actually happen? Are you currently using 'pid'? Also, it would be fine to have a dump of the PID events. In order to get this, you need to: - build a kernel with debugfs enabled; - mount debugfs (mount -t debugfs foo /mnt/debug) Then, before testing: cat /mnt/debug/ieee80211/phy0/stations/*/rc_pid_events > events_dump You can even make a graph out of that, with a python script which Mattias posted on this list some time ago, but a dump would be just fine. -- Ciao Stefano - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
