suspend & resume was broken since it called rt2x00mac_start()
and rt2x00mac_stop() which would fail to execute because the
DEVICE_PRESENT flag was not set.
Move the start and stop handlers into rt2x00lib.c which are called
from rt2x00mac_start() and rt2x00mac_stop() after they have checked
the DEVICE_PRESENT flag, while suspend and resume handlers can
directly call those functions.
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
drivers/net/wireless/rt2x00/rt2x00dev.c | 66 ++++++++++++++++++++++++++++--
drivers/net/wireless/rt2x00/rt2x00lib.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00mac.c | 42 +------------------
3 files changed, 66 insertions(+), 46 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 9b2bd91..cea2bd9 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1046,7 +1046,7 @@ static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev)
}
}
-void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
+static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
{
if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
return;
@@ -1067,7 +1067,7 @@ void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
rt2x00lib_free_ring_entries(rt2x00dev);
}
-int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
+static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
{
int status;
@@ -1110,6 +1110,58 @@ exit:
return status;
}
+int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+
+ if (test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ return 0;
+
+ /*
+ * If this is the first interface which is added,
+ * we should load the firmware now.
+ */
+ if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
+ retval = rt2x00lib_load_firmware(rt2x00dev);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Initialize the device.
+ */
+ retval = rt2x00lib_initialize(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Enable radio.
+ */
+ retval = rt2x00lib_enable_radio(rt2x00dev);
+ if (retval) {
+ rt2x00lib_uninitialize(rt2x00dev);
+ return retval;
+ }
+
+ __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+
+ return 0;
+}
+
+void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
+{
+ if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Perhaps we can add something smarter here,
+ * but for now just disabling the radio should do.
+ */
+ rt2x00lib_disable_radio(rt2x00dev);
+
+ __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
+}
+
/*
* driver allocation handlers.
*/
@@ -1295,7 +1347,7 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
* Disable radio and unitialize all items
* that must be recreated on resume.
*/
- rt2x00mac_stop(rt2x00dev->hw);
+ rt2x00lib_stop(rt2x00dev);
rt2x00lib_uninitialize(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
@@ -1317,7 +1369,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
int retval;
NOTICE(rt2x00dev, "Waking up.\n");
- __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
/*
* Open the debugfs entry.
@@ -1333,7 +1384,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reinitialize device and all active interfaces.
*/
- retval = rt2x00mac_start(rt2x00dev->hw);
+ retval = rt2x00lib_start(rt2x00dev);
if (retval)
goto exit;
@@ -1349,6 +1400,11 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
rt2x00lib_config_type(rt2x00dev, intf->type);
/*
+ * We are ready again to receive requests from mac80211.
+ */
+ __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+
+ /*
* It is possible that during that mac80211 has attempted
* to send frames while we were suspending or resuming.
* In that case we have disabled the TX queue and should
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 108488d..1adbd28 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -44,8 +44,8 @@ void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev);
/*
* Initialization handlers.
*/
-int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev);
-void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev);
+int rt2x00lib_start(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
/*
* Configuration handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 978cffb..1d67bcd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -139,41 +139,11 @@ EXPORT_SYMBOL_GPL(rt2x00mac_tx);
int rt2x00mac_start(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- int status;
- if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
- test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
- /*
- * If this is the first interface which is added,
- * we should load the firmware now.
- */
- if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
- status = rt2x00lib_load_firmware(rt2x00dev);
- if (status)
- return status;
- }
-
- /*
- * Initialize the device.
- */
- status = rt2x00lib_initialize(rt2x00dev);
- if (status)
- return status;
-
- /*
- * Enable radio.
- */
- status = rt2x00lib_enable_radio(rt2x00dev);
- if (status) {
- rt2x00lib_uninitialize(rt2x00dev);
- return status;
- }
-
- __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
-
- return 0;
+ return rt2x00lib_start(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00mac_start);
@@ -184,13 +154,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return;
- /*
- * Perhaps we can add something smarter here,
- * but for now just disabling the radio should do.
- */
- rt2x00lib_disable_radio(rt2x00dev);
-
- __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
+ rt2x00lib_stop(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
--
1.5.3.7
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
