This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted to the 'b44' ssb driver. Signed-off-by: Miguel Botón <mboton@xxxxxxxxx> diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 49e9172..ea2a2b5 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -128,6 +128,8 @@ static void b44_init_rings(struct b44 *); #define B44_FULL_RESET 1 #define B44_FULL_RESET_SKIP_PHY 2 #define B44_PARTIAL_RESET 3 +#define B44_CHIP_RESET_FULL 4 +#define B44_CHIP_RESET_PARTIAL 5 static void b44_init_hw(struct b44 *, int); @@ -1259,7 +1261,7 @@ static void b44_clear_stats(struct b44 *bp) } /* bp->lock is held. */ -static void b44_chip_reset(struct b44 *bp) +static void b44_chip_reset(struct b44 *bp, int reset_kind) { struct ssb_device *sdev = bp->sdev; @@ -1281,6 +1283,13 @@ static void b44_chip_reset(struct b44 *bp) ssb_device_enable(bp->sdev, 0); b44_clear_stats(bp); + /* + * Don't enable PHY if we are doing a partial reset + * we are probably going to power down + */ + if (reset_kind == B44_CHIP_RESET_PARTIAL) + return; + switch (sdev->bus->bustype) { case SSB_BUSTYPE_SSB: bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | @@ -1316,7 +1325,14 @@ static void b44_chip_reset(struct b44 *bp) static void b44_halt(struct b44 *bp) { b44_disable_ints(bp); - b44_chip_reset(bp); + /* reset PHY */ + b44_phy_reset(bp); + /* power down PHY */ + printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name); + bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN); + /* now reset the chip, but without enabling the MAC&PHY + * part of it. This has to be done _after_ we shut down the PHY */ + b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL); } /* bp->lock is held. */ @@ -1365,7 +1381,7 @@ static void b44_init_hw(struct b44 *bp, int reset_kind) { u32 val; - b44_chip_reset(bp); + b44_chip_reset(bp, B44_CHIP_RESET_FULL); if (reset_kind == B44_FULL_RESET) { b44_phy_reset(bp); b44_setup_phy(bp); @@ -1422,7 +1438,7 @@ static int b44_open(struct net_device *dev) err = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev); if (unlikely(err < 0)) { napi_disable(&bp->napi); - b44_chip_reset(bp); + b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL); b44_free_rings(bp); b44_free_consistent(bp); goto out; @@ -2188,7 +2204,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev, /* Chip reset provides power to the b44 MAC & PCI cores, which * is necessary for MAC register access. */ - b44_chip_reset(bp); + b44_chip_reset(bp, B44_CHIP_RESET_FULL); printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n", dev->name, print_mac(mac, dev->dev_addr)); @@ -2212,6 +2228,7 @@ static void __devexit b44_remove_one(struct ssb_device *sdev) unregister_netdev(dev); ssb_bus_may_powerdown(sdev->bus); free_netdev(dev); + ssb_pcihost_set_power_state(sdev, PCI_D3hot); ssb_set_drvdata(sdev, NULL); } @@ -2240,6 +2257,7 @@ static int b44_suspend(struct ssb_device *sdev, pm_message_t state) b44_setup_wol(bp); } + ssb_pcihost_set_power_state(sdev, PCI_D3hot); return 0; } -- Miguel Botón - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
