Search Linux Wireless

Re: Warning emited by 2.6.24-rc6-git5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday 30 December 2007, Chris Clayton wrote:
> On Saturday 29 December 2007, Ivo van Doorn wrote:
> > On Saturday 29 December 2007, Johannes Berg wrote:
> > > > Well Ralink doesn't seem to add this padding since this bug appeared,
> > > > remember all bytes from the DMA was copied to the skb buffer so if
> > > > there was any padding included it would have been copied as well. ;)
> > >
> > > Not necessarily, Broadcom hardware adds the padding in front of the
> > > 802.11 header so if you'd start copying with the 802.11 header you'd run
> > > into the same thing. A quick look at the rt2x00pci.c file doesn't
> > > suggest that there's anything variable about the RX header though so I
> > > guess that indeed this may be a problem.
> > >
> > > > Anyway, I have worked on a fix for the padding and I'll commit it to
> > > > rt2x00.git first to see if anybody reports any problems with it before
> > > > sending it to wireless-dev.
> > >
> 
> If it would help, I'd be happy to test your fix, but I'm not a git user, so 
> you would need to post a patch that I could use...

Here is the patch against the latest vanilla kernel,
the previous piece of code was bugged since the header size check was incorrect,
but that is fixed in this one.

----

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index ff399f8..4f8a37b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -386,6 +386,7 @@ void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
 	struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
 	struct ieee80211_hw_mode *mode;
 	struct ieee80211_rate *rate;
+	unsigned int header_size;
 	unsigned int i;
 	int val = 0;
 
@@ -412,6 +413,26 @@ void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb,
 		}
 	}
 
+	/*
+	 * Properly align the ieee80211 frame and make sure the
+	 * data behind the ieee80211 header is on a 4 byte boundrary.
+	 */
+	header_size = ieee80211_get_hdrlen_from_skb(skb);
+	if (!header_size) {
+		/*
+		 * Frame is too short to contain a valid header,
+		 * drop the entire frame since it is useless.
+		 */
+		kfree_skb(skb);
+		return;
+	} else if (header_size % 4 == 0) {
+		/*
+		 * Move entire frame 2 bytes to the front.
+		 */
+		skb_push(skb, 2);
+		memmove(skb->data, skb->data + 2, skb->len - 2);
+	}
+
 	rt2x00_update_link_rssi(&rt2x00dev->link, desc->rssi);
 	rt2x00dev->link.rx_success++;
 	rx_status->rate = val;

-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux