On Thu, 2007-12-13 at 12:34 +0100, Johannes Berg wrote: > > rt2x00 devices have some flags in the TX descriptor that basically tell > > the device to send a burst of frames, optionally requesting to wait for > > an ack (i.e. CTS in the case of an RTS frame) for any of them. > > Interesting. I can't the place where that is set though, can you point > me to it? For each frame, rt2x00 creates a txdata_entry_desc structure (see rt2x00lib_write_tx_desc()), which holds all the information that is written to the actual tx descriptors (format of these varies among the different devices we support, but the information in the tx descriptors is roughly the same). See rt61pci_write_tx_desc() for an example of how the information is stored into the actual tx descriptor, but that's rather boring. The bits you're interested in are ENTRY_TXD_ACK and ENTRY_TXD_BURST. BURST tells the device the next frame is part of the same burst (also note that we have to set the correct IFS), i.e. the next frame goes out directly after the current one (respecting the IFS of course). The TXD_ACK bit means the hardware should wait for an ack of some kind (e.g. CTS for RTS frames). Mattas - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
