From: Ben Cahill <ben.m.cahill@xxxxxxxxx>
Document 4965 rate_n_flags bits
Signed-off-by: Ben Cahill <ben.m.cahill@xxxxxxxxx>
Signed-off-by: Zhu Yi <yi.zhu@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/iwl-4965-commands.h | 98 +++++++++++++++++++---
drivers/net/wireless/iwlwifi/iwl-4965.h | 30 ++-----
2 files changed, 92 insertions(+), 36 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
index 2703c52..00d4ab7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
@@ -141,7 +141,8 @@ enum {
/******************************************************************************
* (0)
- * Header
+ * Commonly used structures and definitions:
+ * Command header, rate_n_flags
*
*****************************************************************************/
@@ -167,6 +168,89 @@ struct iwl4965_cmd_header {
u8 data[0];
} __attribute__ ((packed));
+/**
+ * 4965 rate_n_flags bit fields
+ *
+ * rate_n_flags format is used in following 4965 commands:
+ * REPLY_4965_RX (response only)
+ * REPLY_TX (both command and response)
+ * REPLY_TX_LINK_QUALITY_CMD
+ *
+ * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
+ * 2-0: 0) 6 Mbps
+ * 1) 12 Mbps
+ * 2) 18 Mbps
+ * 3) 24 Mbps
+ * 4) 36 Mbps
+ * 5) 48 Mbps
+ * 6) 54 Mbps
+ * 7) 60 Mbps
+ *
+ * 3: 0) Single stream (SISO)
+ * 1) Dual stream (MIMO)
+ *
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
+ *
+ * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
+ * 3-0: 0xD) 6 Mbps
+ * 0xF) 9 Mbps
+ * 0x5) 12 Mbps
+ * 0x7) 18 Mbps
+ * 0x9) 24 Mbps
+ * 0xB) 36 Mbps
+ * 0x1) 48 Mbps
+ * 0x3) 54 Mbps
+ *
+ * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
+ * 3-0: 10) 1 Mbps
+ * 20) 2 Mbps
+ * 55) 5.5 Mbps
+ * 110) 11 Mbps
+ */
+#define RATE_MCS_CODE_MSK 0x7
+#define RATE_MCS_MIMO_POS 3
+#define RATE_MCS_MIMO_MSK 0x8
+#define RATE_MCS_HT_DUP_POS 5
+#define RATE_MCS_HT_DUP_MSK 0x20
+
+/* (1) HT format, (0) legacy format in bits 7:0 */
+#define RATE_MCS_FLAGS_POS 8
+#define RATE_MCS_HT_POS 8
+#define RATE_MCS_HT_MSK 0x100
+
+/* (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
+#define RATE_MCS_CCK_POS 9
+#define RATE_MCS_CCK_MSK 0x200
+
+/* (1) Use Green Field preamble */
+#define RATE_MCS_GF_POS 10
+#define RATE_MCS_GF_MSK 0x400
+
+/* (1) Use 40Mhz FAT channel width, (0) use 20 MHz legacy channel width */
+#define RATE_MCS_FAT_POS 11
+#define RATE_MCS_FAT_MSK 0x800
+
+/* (1) Duplicate data on both 20MHz channels. FAT (bit 11) must be set. */
+#define RATE_MCS_DUP_POS 12
+#define RATE_MCS_DUP_MSK 0x1000
+
+/* (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
+#define RATE_MCS_SGI_POS 13
+#define RATE_MCS_SGI_MSK 0x2000
+
+/**
+ * rate_n_flags Tx antenna masks (4965 has 2 transmitters):
+ * bit14:15 01 B inactive, A active
+ * 10 B active, A inactive
+ * 11 Both active
+ */
+#define RATE_MCS_ANT_A_POS 14
+#define RATE_MCS_ANT_B_POS 15
+#define RATE_MCS_ANT_A_MSK 0x4000
+#define RATE_MCS_ANT_B_MSK 0x8000
+#define RATE_MCS_ANT_AB_MSK 0xc000
+
+
/******************************************************************************
* (0a)
* Alive and Error Commands & Responses:
@@ -452,18 +536,6 @@ struct iwl4965_qosparam_cmd {
#define STA_MODIFY_DELBA_TID_MSK 0x10
#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
-/*
- * Antenna masks:
- * bit14:15 01 B inactive, A active
- * 10 B active, A inactive
- * 11 Both active
- */
-#define RATE_MCS_ANT_A_POS 14
-#define RATE_MCS_ANT_B_POS 15
-#define RATE_MCS_ANT_A_MSK 0x4000
-#define RATE_MCS_ANT_B_MSK 0x8000
-#define RATE_MCS_ANT_AB_MSK 0xc000
-
struct iwl4965_keyinfo {
__le16 key_flags;
u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h
index 3000148..af34974 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.h
@@ -883,6 +883,11 @@ struct iwl4965_traffic_load {
};
#ifdef CONFIG_IWL4965_HT_AGG
+/**
+ * struct iwl4965_agg_control
+ * @requested_ba: bit map of tids requesting aggregation/block-ack
+ * @granted_ba: bit map of tids granted aggregation/block-ack
+ */
struct iwl4965_agg_control {
unsigned long next_retry;
u32 wait_for_agg_status;
@@ -1054,29 +1059,8 @@ struct iwl4965_chain_noise_data {
u8 radio_write;
};
-/* IWL4965 */
-#define RATE_MCS_CODE_MSK 0x7
-#define RATE_MCS_MIMO_POS 3
-#define RATE_MCS_MIMO_MSK 0x8
-#define RATE_MCS_HT_DUP_POS 5
-#define RATE_MCS_HT_DUP_MSK 0x20
-#define RATE_MCS_FLAGS_POS 8
-#define RATE_MCS_HT_POS 8
-#define RATE_MCS_HT_MSK 0x100
-#define RATE_MCS_CCK_POS 9
-#define RATE_MCS_CCK_MSK 0x200
-#define RATE_MCS_GF_POS 10
-#define RATE_MCS_GF_MSK 0x400
-
-#define RATE_MCS_FAT_POS 11
-#define RATE_MCS_FAT_MSK 0x800
-#define RATE_MCS_DUP_POS 12
-#define RATE_MCS_DUP_MSK 0x1000
-#define RATE_MCS_SGI_POS 13
-#define RATE_MCS_SGI_MSK 0x2000
-
-#define EEPROM_SEM_TIMEOUT 10
-#define EEPROM_SEM_RETRY_LIMIT 1000
+#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
+#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
--
1.5.3.6
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
