Search Linux Wireless

[PATCH] b43: include full 64-bit timestamp in monitor mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>

When monitor mode is enabled, this will make b43 read out the
full 64-bit MAC time from the chip for each received packet.

Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Signed-off-by: Michael Buesch <mb@xxxxxxxxx>

---
 drivers/net/wireless/b43/b43.h  |    2 ++
 drivers/net/wireless/b43/main.c |    2 ++
 drivers/net/wireless/b43/xmit.c |   18 +++++++++++++++++-
 3 files changed, 21 insertions(+), 1 deletion(-)

--- everything.orig/drivers/net/wireless/b43/b43.h	2007-11-22 22:56:20.648678709 +0100
+++ everything/drivers/net/wireless/b43/b43.h	2007-11-22 23:03:27.268675020 +0100
@@ -635,6 +635,8 @@ struct b43_wl {
 	/* List of all wireless devices on this chip */
 	struct list_head devlist;
 	u8 nr_devs;
+
+	bool radiotap_enabled;
 };
 
 /* Pointers to the firmware data and meta information about it. */
--- everything.orig/drivers/net/wireless/b43/main.c	2007-11-22 22:55:49.608678981 +0100
+++ everything/drivers/net/wireless/b43/main.c	2007-11-22 23:03:53.678676051 +0100
@@ -2853,6 +2853,8 @@ static int b43_op_config(struct ieee8021
 			b43_short_slot_timing_disable(dev);
 	}
 
+	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
 		if (conf->power_level != phy->power_level) {
--- everything.orig/drivers/net/wireless/b43/xmit.c	2007-11-22 22:54:33.498725965 +0100
+++ everything/drivers/net/wireless/b43/xmit.c	2007-11-22 23:15:44.808681966 +0100
@@ -526,7 +526,23 @@ void b43_rx(struct b43_wldev *dev, struc
 	else
 		status.rate = b43_plcp_get_bitrate_cck(plcp);
 	status.antenna = !!(phystat0 & B43_RX_PHYST0_ANT);
-	status.mactime = mactime;
+
+	/*
+	 * If monitors are present get full 64-bit timestamp. This
+	 * code assumes we get to process the packet within 16 bits
+	 * of timestamp, i.e. about 65 milliseconds after the PHY
+	 * received the first symbol.
+	 */
+	if (dev->wl->radiotap_enabled) {
+		u16 low_mactime_now;
+
+		b43_tsf_read(dev, &status.mactime);
+		low_mactime_now = status.mactime;
+		status.mactime = status.mactime & ~0xFFFFULL;
+		status.mactime += mactime;
+		if (low_mactime_now <= mactime)
+			status.mactime -= 0x10000;
+	}
 
 	chanid = (chanstat & B43_RX_CHAN_ID) >> B43_RX_CHAN_ID_SHIFT;
 	switch (chanstat & B43_RX_CHAN_PHYTYPE) {




-------------------------------------------------------

-- 
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux