Remove bcm43xx. Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@xxxxxxxxx> --- John, this is for 2.6.25 - in case you didn't get the full patch. Please also run: git rm -r drivers/wireless/bcm43xx --- Index: wireless-2.6/Documentation/networking/bcm43xx.txt =================================================================== --- wireless-2.6.orig/Documentation/networking/bcm43xx.txt +++ /dev/null @@ -1,89 +0,0 @@ - - BCM43xx Linux Driver Project - ============================ - -Introduction ------------- - -Many of the wireless devices found in modern notebook computers are -based on the wireless chips produced by Broadcom. These devices have -been a problem for Linux users as there is no open-source driver -available. In addition, Broadcom has not released specifications -for the device, and driver availability has been limited to the -binary-only form used in the GPL versions of AP hardware such as the -Linksys WRT54G, and the Windows and OS X drivers. Before this project -began, the only way to use these devices were to use the Windows or -OS X drivers with either the Linuxant or ndiswrapper modules. There -is a strong penalty if this method is used as loading the binary-only -module "taints" the kernel, and no kernel developer will help diagnose -any kernel problems. - -Development ------------ - -This driver has been developed using -a clean-room technique that is described at -http://bcm-specs.sipsolutions.net/ReverseEngineeringProcess. For legal -reasons, none of the clean-room crew works on the on the Linux driver, -and none of the Linux developers sees anything but the specifications, -which are the ultimate product of the reverse-engineering group. - -Software --------- - -Since the release of the 2.6.17 kernel, the bcm43xx driver has been -distributed with the kernel source, and is prebuilt in most, if not -all, distributions. There is, however, additional software that is -required. The firmware used by the chip is the intellectual property -of Broadcom and they have not given the bcm43xx team redistribution -rights to this firmware. Since we cannot legally redistribute -the firmware we cannot include it with the driver. Furthermore, it -cannot be placed in the downloadable archives of any distributing -organization; therefore, the user is responsible for obtaining the -firmware and placing it in the appropriate location so that the driver -can find it when initializing. - -To help with this process, the bcm43xx developers provide a separate -program named bcm43xx-fwcutter to "cut" the firmware out of a -Windows or OS X driver and write the extracted files to the proper -location. This program is usually provided with the distribution; -however, it may be downloaded from - -http://developer.berlios.de/project/showfiles.php?group_id=4547 - -The firmware is available in two versions. V3 firmware is used with -the in-kernel bcm43xx driver that uses a software MAC layer called -SoftMAC, and will have a microcode revision of 0x127 or smaller. The -V4 firmware is used by an out-of-kernel driver employing a variation of -the Devicescape MAC layer known as d80211. Once bcm43xx-d80211 reaches -a satisfactory level of development, it will replace bcm43xx-softmac -in the kernel as it is much more flexible and powerful. - -A source for the latest V3 firmware is - -http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o - -Once this file is downloaded, the command -'bcm43xx-fwcutter -w <dir> <filename>' -will extract the microcode and write it to directory -<dir>. The correct directory will depend on your distribution; -however, most use '/lib/firmware'. Once this step is completed, -the bcm3xx driver should load when the system is booted. To see -any messages relating to the driver, issue the command 'dmesg | -grep bcm43xx' from a terminal window. If there are any problems, -please send that output to Bcm43xx-dev@xxxxxxxxxxxxxxxxx - -Although the driver has been in-kernel since 2.6.17, the earliest -version is quite limited in its capability. Patches that include -all features of later versions are available for the stable kernel -versions from 2.6.18. These will be needed if you use a BCM4318, -or a PCI Express version (BCM4311 and BCM4312). In addition, if you -have an early BCM4306 and more than 1 GB RAM, your kernel will need -to be patched. These patches, which are being updated regularly, -are available at ftp://lwfinger.dynalias.org/patches. Look for -combined_2.6.YY.patch. Of course you will need kernel source downloaded -from kernel.org, or the source from your distribution. - -If you build your own kernel, please enable CONFIG_BCM43XX_DEBUG -and CONFIG_IEEE80211_SOFTMAC_DEBUG. The log information provided is -essential for solving any problems. Index: wireless-2.6/MAINTAINERS =================================================================== --- wireless-2.6.orig/MAINTAINERS +++ wireless-2.6/MAINTAINERS @@ -821,15 +821,6 @@ L: linux-wireless@xxxxxxxxxxxxxxx W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained -BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION) -P: Larry Finger -M: Larry.Finger@xxxxxxxxxxxx -P: Stefano Brivio -M: stefano.brivio@xxxxxxxxx -L: linux-wireless@xxxxxxxxxxxxxxx -W: http://bcm43xx.berlios.de/ -S: Maintained - BEFS FILE SYSTEM P: Sergey S. Kostyliov M: rathamahata@xxxxxxx Index: wireless-2.6/drivers/net/wireless/Kconfig =================================================================== --- wireless-2.6.orig/drivers/net/wireless/Kconfig +++ wireless-2.6/drivers/net/wireless/Kconfig @@ -629,7 +629,6 @@ config ATH5K source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" -source "drivers/net/wireless/bcm43xx/Kconfig" source "drivers/net/wireless/b43/Kconfig" source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" Index: wireless-2.6/drivers/net/wireless/Makefile =================================================================== --- wireless-2.6.orig/drivers/net/wireless/Makefile +++ wireless-2.6/drivers/net/wireless/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_USB_ATMEL) += at76_ obj-$(CONFIG_PRISM54) += prism54/ obj-$(CONFIG_HOSTAP) += hostap/ -obj-$(CONFIG_BCM43XX) += bcm43xx/ obj-$(CONFIG_B43) += b43/ obj-$(CONFIG_B43LEGACY) += b43legacy/ obj-$(CONFIG_ZD1211RW) += zd1211rw/ Index: wireless-2.6/drivers/net/wireless/b43/main.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43/main.c +++ wireless-2.6/drivers/net/wireless/b43/main.c @@ -1558,7 +1558,7 @@ static void b43_release_firmware(struct static void b43_print_fw_helptext(struct b43_wl *wl) { b43err(wl, "You must go to " - "http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware " + "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware " "and download the correct firmware (version 4).\n"); } Index: wireless-2.6/drivers/net/wireless/b43legacy/dma.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43legacy/dma.c +++ wireless-2.6/drivers/net/wireless/b43legacy/dma.c @@ -996,7 +996,7 @@ int b43legacy_dma_init(struct b43legacy_ err = ssb_dma_set_mask(dev->dev, dmamask); if (err) { -#ifdef BCM43XX_PIO +#ifdef CONFIG_B43LEGACY_PIO b43legacywarn(dev->wl, "DMA for this device not supported. " "Falling back to PIO\n"); dev->__using_pio = 1; Index: wireless-2.6/drivers/net/wireless/b43legacy/main.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/b43legacy/main.c +++ wireless-2.6/drivers/net/wireless/b43legacy/main.c @@ -1398,7 +1398,7 @@ static void b43legacy_release_firmware(s static void b43legacy_print_fw_helptext(struct b43legacy_wl *wl) { b43legacyerr(wl, "You must go to http://linuxwireless.org/en/users/"; - "Drivers/bcm43xx#devicefirmware " + "Drivers/b43#devicefirmware " "and download the correct firmware (version 3).\n"); } -- Ciao Stefano - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
