Patch 5 of 6.
The b43legacy driver is modified to use the new SPROM structure.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
Index: wireless-2.6/drivers/net/wireless/b43legacy/leds.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/leds.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/leds.c
@@ -189,10 +189,10 @@ void b43legacy_leds_init(struct b43legac
enum b43legacy_led_behaviour behaviour;
bool activelow;
- sprom[0] = bus->sprom.r1.gpio0;
- sprom[1] = bus->sprom.r1.gpio1;
- sprom[2] = bus->sprom.r1.gpio2;
- sprom[3] = bus->sprom.r1.gpio3;
+ sprom[0] = bus->sprom.data.gpio0;
+ sprom[1] = bus->sprom.data.gpio1;
+ sprom[2] = bus->sprom.data.gpio2;
+ sprom[3] = bus->sprom.data.gpio3;
for (i = 0; i < 4; i++) {
if (sprom[i] == 0xFF) {
Index: wireless-2.6/drivers/net/wireless/b43legacy/main.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/main.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/main.c
@@ -1753,7 +1753,7 @@ static int b43legacy_gpio_init(struct b4
mask |= 0x0060;
set |= 0x0060;
}
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL) {
+ if (dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_PACTRL) {
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
@@ -2130,7 +2130,7 @@ static void b43legacy_periodic_every120s
static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_lo_mark_all_unused(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+ if (dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_mac_suspend(dev);
b43legacy_calc_nrssi_slope(dev);
b43legacy_mac_enable(dev);
@@ -3055,7 +3055,7 @@ static int b43legacy_wireless_core_init(
hf |= B43legacy_HF_SYMW;
if (phy->rev == 1)
hf |= B43legacy_HF_GDCW;
- if (sprom->r1.boardflags_lo & B43legacy_BFL_PACTRL)
+ if (sprom->data.boardflags_lo & B43legacy_BFL_PACTRL)
hf |= B43legacy_HF_OFDMPABOOST;
} else if (phy->type == B43legacy_PHYTYPE_B) {
hf |= B43legacy_HF_SYMW;
@@ -3534,12 +3534,12 @@ static void b43legacy_sprom_fixup(struct
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E &&
bus->boardinfo.rev > 0x40)
- bus->sprom.r1.boardflags_lo |= B43legacy_BFL_PACTRL;
+ bus->sprom.data.boardflags_lo |= B43legacy_BFL_PACTRL;
/* Convert Antennagain values to Q5.2 */
- if (bus->sprom.r1.antenna_gain_bg == 0xFF)
- bus->sprom.r1.antenna_gain_bg = 2; /* if unset, use 2 dBm */
- bus->sprom.r1.antenna_gain_bg <<= 2;
+ if (bus->sprom.data.antenna_gain_bg == 0xFF)
+ bus->sprom.data.antenna_gain_bg = 2; /* if unset, use 2 dBm */
+ bus->sprom.data.antenna_gain_bg <<= 2;
}
static void b43legacy_wireless_exit(struct ssb_device *dev,
@@ -3574,10 +3574,10 @@ static int b43legacy_wireless_init(struc
hw->max_noise = -110;
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
- if (is_valid_ether_addr(sprom->r1.et1mac))
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+ if (is_valid_ether_addr(sprom->data.et1mac))
+ SET_IEEE80211_PERM_ADDR(hw, sprom->data.et1mac);
else
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+ SET_IEEE80211_PERM_ADDR(hw, sprom->data.il0mac);
/* Get and initialize struct b43legacy_wl */
wl = hw_to_b43legacy_wl(hw);
Index: wireless-2.6/drivers/net/wireless/b43legacy/phy.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/phy.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/phy.c
@@ -441,7 +441,7 @@ static void b43legacy_phy_inita(struct b
might_sleep();
b43legacy_phy_setupg(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL)
+ if (dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_PACTRL)
b43legacy_phy_write(dev, 0x046E, 0x03CF);
}
@@ -543,7 +543,7 @@ static void b43legacy_phy_initb4(struct
if (phy->radio_ver == 0x2050)
b43legacy_phy_write(dev, 0x002A, 0x88C2);
b43legacy_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+ if (dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_calc_nrssi_slope(dev);
b43legacy_calc_nrssi_threshold(dev);
}
@@ -699,7 +699,7 @@ static void b43legacy_phy_initb6(struct
b43legacy_radio_write16(dev, 0x005A, 0x0088);
b43legacy_radio_write16(dev, 0x005B, 0x006B);
b43legacy_radio_write16(dev, 0x005C, 0x000F);
- if (dev->dev->bus->sprom.r1.boardflags_lo & 0x8000) {
+ if (dev->dev->bus->sprom.data.boardflags_lo & 0x8000) {
b43legacy_radio_write16(dev, 0x005D, 0x00FA);
b43legacy_radio_write16(dev, 0x005E, 0x00D8);
} else {
@@ -797,7 +797,7 @@ static void b43legacy_phy_initb6(struct
b43legacy_phy_write(dev, 0x0062, 0x0007);
b43legacy_radio_init2050(dev);
b43legacy_phy_lo_g_measure(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo &
+ if (dev->dev->bus->sprom.data.boardflags_lo &
B43legacy_BFL_RSSI) {
b43legacy_calc_nrssi_slope(dev);
b43legacy_calc_nrssi_threshold(dev);
@@ -921,7 +921,7 @@ static void b43legacy_calc_loopback_gain
b43legacy_phy_read(dev, 0x0811) | 0x0100);
b43legacy_phy_write(dev, 0x0812,
b43legacy_phy_read(dev, 0x0812) & 0xCFFF);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_EXTLNA) {
+ if (dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_EXTLNA) {
if (phy->rev >= 7) {
b43legacy_phy_write(dev, 0x0811,
b43legacy_phy_read(dev, 0x0811)
@@ -1072,7 +1072,7 @@ static void b43legacy_phy_initg(struct b
b43legacy_phy_write(dev, 0x0036,
(b43legacy_phy_read(dev, 0x0036)
& 0x0FFF) | (phy->txctl2 << 12));
- if (dev->dev->bus->sprom.r1.boardflags_lo &
+ if (dev->dev->bus->sprom.data.boardflags_lo &
B43legacy_BFL_PACTRL)
b43legacy_phy_write(dev, 0x002E, 0x8075);
else
@@ -1087,7 +1087,7 @@ static void b43legacy_phy_initg(struct b
b43legacy_phy_write(dev, 0x080F, 0x8078);
}
- if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI)) {
+ if (!(dev->dev->bus->sprom.data.boardflags_lo & B43legacy_BFL_RSSI)) {
/* The specs state to update the NRSSI LT with
* the value 0x7FFFFFFF here. I think that is some weird
* compiler optimization in the original driver.
@@ -1838,9 +1838,9 @@ void b43legacy_phy_xmitpower(struct b43l
estimated_pwr = b43legacy_phy_estimate_power_out(dev, average);
- max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
+ max_pwr = dev->dev->bus->sprom.data.maxpwr_bg;
- if ((dev->dev->bus->sprom.r1.boardflags_lo
+ if ((dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_PACTRL) &&
(phy->type == B43legacy_PHYTYPE_G))
max_pwr -= 0x3;
@@ -1848,7 +1848,7 @@ void b43legacy_phy_xmitpower(struct b43l
b43legacywarn(dev->wl, "Invalid max-TX-power value in SPROM."
"\n");
max_pwr = 74; /* fake it */
- dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+ dev->dev->bus->sprom.data.maxpwr_bg = max_pwr;
}
/* Use regulatory information to get the maximum power.
@@ -1858,7 +1858,8 @@ void b43legacy_phy_xmitpower(struct b43l
* and 1.5 dBm (a safety factor??). The result is in Q5.2 format
* which accounts for the factor of 4 */
#define REG_MAX_PWR 20
- max_pwr = min(REG_MAX_PWR * 4 - dev->dev->bus->sprom.r1.antenna_gain_bg
+ max_pwr = min(REG_MAX_PWR * 4
+ - dev->dev->bus->sprom.data.antenna_gain_bg
- 0x6, max_pwr);
/* find the desired power in Q5.2 - power_level is in dBm
@@ -1918,7 +1919,7 @@ void b43legacy_phy_xmitpower(struct b43l
txpower = 3;
radio_attenuation += 2;
baseband_attenuation += 2;
- } else if (dev->dev->bus->sprom.r1.boardflags_lo
+ } else if (dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_PACTRL) {
baseband_attenuation += 4 *
(radio_attenuation - 2);
@@ -2000,9 +2001,9 @@ int b43legacy_phy_init_tssi2dbm_table(st
B43legacy_WARN_ON(!(phy->type == B43legacy_PHYTYPE_B ||
phy->type == B43legacy_PHYTYPE_G));
- pab0 = (s16)(dev->dev->bus->sprom.r1.pa0b0);
- pab1 = (s16)(dev->dev->bus->sprom.r1.pa0b1);
- pab2 = (s16)(dev->dev->bus->sprom.r1.pa0b2);
+ pab0 = (s16)(dev->dev->bus->sprom.data.pa0b0);
+ pab1 = (s16)(dev->dev->bus->sprom.data.pa0b1);
+ pab2 = (s16)(dev->dev->bus->sprom.data.pa0b2);
if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
phy->idle_tssi = 0x34;
@@ -2013,9 +2014,10 @@ int b43legacy_phy_init_tssi2dbm_table(st
if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
pab0 != -1 && pab1 != -1 && pab2 != -1) {
/* The pabX values are set in SPROM. Use them. */
- if ((s8)dev->dev->bus->sprom.r1.itssi_bg != 0 &&
- (s8)dev->dev->bus->sprom.r1.itssi_bg != -1)
- phy->idle_tssi = (s8)(dev->dev->bus->sprom.r1.itssi_bg);
+ if ((s8)dev->dev->bus->sprom.data.itssi_bg != 0 &&
+ (s8)dev->dev->bus->sprom.data.itssi_bg != -1)
+ phy->idle_tssi = (s8)(dev->dev->bus->sprom.data.
+ itssi_bg);
else
phy->idle_tssi = 62;
dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
Index: wireless-2.6/drivers/net/wireless/b43legacy/radio.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/radio.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/radio.c
@@ -827,7 +827,7 @@ void b43legacy_calc_nrssi_threshold(stru
case B43legacy_PHYTYPE_B: {
if (phy->radio_ver != 0x2050)
return;
- if (!(dev->dev->bus->sprom.r1.boardflags_lo &
+ if (!(dev->dev->bus->sprom.data.boardflags_lo &
B43legacy_BFL_RSSI))
return;
@@ -857,7 +857,7 @@ void b43legacy_calc_nrssi_threshold(stru
}
case B43legacy_PHYTYPE_G:
if (!phy->gmode ||
- !(dev->dev->bus->sprom.r1.boardflags_lo &
+ !(dev->dev->bus->sprom.data.boardflags_lo &
B43legacy_BFL_RSSI)) {
tmp16 = b43legacy_nrssi_hw_read(dev, 0x20);
if (tmp16 >= 0x20)
@@ -1406,7 +1406,7 @@ static u16 b43legacy_get_812_value(struc
if (!phy->gmode)
return 0;
if (!has_loopback_gain(phy)) {
- if (phy->rev < 7 || !(dev->dev->bus->sprom.r1.boardflags_lo
+ if (phy->rev < 7 || !(dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_EXTLNA)) {
switch (lpd) {
case LPD(0, 1, 1):
@@ -1459,7 +1459,7 @@ static u16 b43legacy_get_812_value(struc
}
loop_or = (loop << 8) | extern_lna_control;
- if (phy->rev >= 7 && dev->dev->bus->sprom.r1.boardflags_lo
+ if (phy->rev >= 7 && dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_EXTLNA) {
if (extern_lna_control)
loop_or |= 0x8000;
@@ -1550,7 +1550,7 @@ u16 b43legacy_radio_init2050(struct b43l
b43legacy_get_812_value(dev,
LPD(0, 1, 1)));
if (phy->rev < 7 ||
- !(dev->dev->bus->sprom.r1.boardflags_lo
+ !(dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_EXTLNA))
b43legacy_phy_write(dev, 0x0811, 0x01B3);
else
@@ -1786,7 +1786,7 @@ int b43legacy_radio_selectchannel(struct
channel2freq_bg(channel));
if (channel == 14) {
- if (dev->dev->bus->sprom.r1.country_code == 5) /* JAPAN) */
+ if (dev->dev->bus->sprom.data.country_code == 5) /* JAPAN) */
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED,
B43legacy_UCODEFLAGS_OFFSET,
b43legacy_shm_read32(dev,
Index: wireless-2.6/drivers/net/wireless/b43legacy/xmit.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/b43legacy/xmit.c
+++ wireless-2.6/drivers/net/wireless/b43legacy/xmit.c
@@ -378,7 +378,7 @@ static s8 b43legacy_rssi_postprocess(str
else
tmp -= 3;
} else {
- if (dev->dev->bus->sprom.r1.boardflags_lo
+ if (dev->dev->bus->sprom.data.boardflags_lo
& B43legacy_BFL_RSSI) {
if (in_rssi > 63)
in_rssi = 63;
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
