Hello Michael, On Sat, 13 Oct 2007 10:24:47 +0200 Michael Buesch wrote: > On Saturday 13 October 2007 10:17:30 Vitaly Bordug wrote: > > phy1: Failed to select rate control algorithm > > phy1: Failed to initialize rate control algorithm > > That's nothing b43 or ssb related. > Compile and load the rc80211_simple module. > oh, thanks, that was broken module dependencies. Well at least it is saved in archive now, no nobody else would step into it. Another question: is this driver known to work okay in ad-hoc or master mode? I gave it a try and there is no driver-side whine, but it does not seem to work either. I see couple of packages turnaround, sometimes even dhcp server is able to feed IP via wlan (host is acting as kinda AP), but nothing after that. And, soon after actual b43 replaced bcm... in rawhide, the same worked, e.g. for at least 5 minutes my wifi-enabled E61 was able stay up and connected (b43 was in ad-hoc mode that time). I would appreciate any feedback. TIA -- Sincerely, Vitaly - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
