Search Linux Wireless

[RFC 1/2] mac80211: allow drivers to indicate failed FCS/PLCP checksum

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch allows drivers to indicate bad FCS/PLCP CRC to the stack and
have the stack drop packets like that except for monitor interfaces.

Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
 include/net/mac80211.h |    2 ++
 net/mac80211/rx.c      |   21 ++++++++++++++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)

--- wireless-dev.orig/include/net/mac80211.h	2007-08-15 15:26:31.346516958 +0200
+++ wireless-dev/include/net/mac80211.h	2007-08-15 15:27:03.766516958 +0200
@@ -241,6 +241,8 @@ struct ieee80211_rx_status {
 #define RX_FLAG_MMIC_ERROR	(1<<0)
 #define RX_FLAG_DECRYPTED	(1<<1)
 #define RX_FLAG_RADIOTAP	(1<<2)
+#define RX_FLAG_FAILED_FCS_CRC	(1<<3)
+#define RX_FLAG_FAILED_PLCP_CRC	(1<<4)
 	int flag;
 };
 
--- wireless-dev.orig/net/mac80211/rx.c	2007-08-15 15:26:31.426516958 +0200
+++ wireless-dev/net/mac80211/rx.c	2007-08-15 15:27:03.766516958 +0200
@@ -154,6 +154,7 @@ ieee80211_rx_monitor(struct net_device *
 		__le16 chan_freq;
 		__le16 chan_flags;
 		u8 antsignal;
+		__le16 rx_flags;
 	} __attribute__ ((packed)) *rthdr;
 
 	skb->dev = dev;
@@ -178,12 +179,21 @@ ieee80211_rx_monitor(struct net_device *
 		cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
 			    (1 << IEEE80211_RADIOTAP_RATE) |
 			    (1 << IEEE80211_RADIOTAP_CHANNEL) |
-			    (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL));
+			    (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) |
+			    (1 << IEEE80211_RADIOTAP_RX_FLAGS));
 	rthdr->flags = local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS ?
 		       IEEE80211_RADIOTAP_F_FCS : 0;
+
+	/* FIXME: when radiotap gets a 'bad PLCP' flag use it here */
+	rthdr->rx_flags = 0;
+	if (status->flag &
+	    (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
+		rthdr->rx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADFCS);
+
 	rate = ieee80211_get_rate(local, status->phymode, status->rate);
 	if (rate)
 		rthdr->rate = rate->rate / 5;
+
 	rthdr->chan_freq = cpu_to_le16(status->freq);
 	rthdr->chan_flags =
 		status->phymode == MODE_IEEE80211A ?
@@ -211,6 +221,15 @@ ieee80211_rx_h_monitor(struct ieee80211_
 		return TXRX_QUEUED;
 	}
 
+	/*
+	 * Drop frames with failed FCS/PLCP checksums here, they are only
+	 * relevant for monitor mode, the rest of the stack should never
+	 * see them.
+	 */
+	if (rx->u.rx.status->flag &
+	    (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
+		return TXRX_DROP;
+
 	if (rx->u.rx.status->flag & RX_FLAG_RADIOTAP)
 		skb_pull(rx->skb, ieee80211_get_radiotap_len(rx->skb->data));
 

-- 

-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux