Search Linux Wireless

[PATCH 2.6.23 2/3] [wireless] Kconfig: remove references of pcmcia-cs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pcmcia-cs/cardmgr is deprecated and mentioning it in the help text is
misleading.

Signed-off-by: Faidon Liambotis <paravoid@xxxxxxxxxx>
---
 drivers/net/wireless/Kconfig |   17 +----------------
 1 files changed, 1 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2e264b0..cfcaf5c 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -63,11 +63,6 @@ config WAVELAN
 	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
 	  radio frequencies 900 MHz and 2.4 GHz.
 
-	  This driver support the ISA version of the WaveLAN card.  A separate
-	  driver for the PCMCIA (PC-card) hardware is available in David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).
-
 	  If you want to use an ISA WaveLAN card under Linux, say Y and read
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>. Some more specific
@@ -390,12 +385,7 @@ config PCMCIA_HERMES
 	  such as the Linksys, D-Link and Farallon Skyline.  It should also
 	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
 
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  You also want to check out the PCMCIA-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  You will also very likely also need the Wireless Tools in order to
+	  You will very likely need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works:
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
@@ -467,11 +457,6 @@ config AIRO_CS
 	  and Cisco proprietary API, so both the Linux Wireless Tools and the
 	  Cisco Linux utilities can be used to configure the card.
 
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  You also want to check out the PCMCIA-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
 config PCMCIA_WL3501
       tristate "Planet WL3501 PCMCIA cards"
       depends on EXPERIMENTAL && PCMCIA && WLAN_80211
-- 
1.5.2.4

-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux