On Wed, 2007-06-27 at 16:55 -0400, John W. Linville wrote:
> The following changes since commit 189548642c5962e60c3667bdb3a703fe0bed12a6:
> Linus Torvalds (1):
> Linus 2.6.22-rc6
Jeff,
These don't look like they made it into rc7 at all; we don't really want
the ioctls leaking out into kernel ABI, which these fixes remove...
Thanks,
Dan
> are found in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git libertas-fixes
>
> Dan Williams (4):
> libertas: style fixes
> libertas: kill wlan_scan_process_results
> libertas: fix WPA associations by handling ENABLE_RSN correctly
> libertas: remove private ioctls
>
> drivers/net/wireless/libertas/Makefile | 2 +-
> drivers/net/wireless/libertas/README | 275 --------
> drivers/net/wireless/libertas/assoc.c | 28 +-
> drivers/net/wireless/libertas/cmd.c | 12 +-
> drivers/net/wireless/libertas/cmdresp.c | 21 +
> drivers/net/wireless/libertas/hostcmd.h | 2 +-
> drivers/net/wireless/libertas/ioctl.c | 1081 -------------------------------
> drivers/net/wireless/libertas/main.c | 8 +-
> drivers/net/wireless/libertas/scan.c | 51 +--
> drivers/net/wireless/libertas/wext.c | 152 -----
> drivers/net/wireless/libertas/wext.h | 45 +--
> 11 files changed, 79 insertions(+), 1598 deletions(-)
> delete mode 100644 drivers/net/wireless/libertas/ioctl.c
>
> diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
> index a1097f5..32ed413 100644
> --- a/drivers/net/wireless/libertas/Makefile
> +++ b/drivers/net/wireless/libertas/Makefile
> @@ -2,7 +2,7 @@ libertas-objs := main.o fw.o wext.o \
> rx.o tx.o cmd.o \
> cmdresp.o scan.o \
> join.o 11d.o \
> - ioctl.o debugfs.o \
> + debugfs.o \
> ethtool.o assoc.o
>
> usb8xxx-objs += if_bootcmd.o
> diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
> index 1f92f50..0b133ce 100644
> --- a/drivers/net/wireless/libertas/README
> +++ b/drivers/net/wireless/libertas/README
> @@ -28,281 +28,6 @@ DRIVER LOADING
>
> insmod usb8388.ko [fw_name=usb8388.bin]
>
> -=====================
> -IWPRIV COMMAND
> -=====================
> -
> -NAME
> - This manual describes the usage of private commands used in Marvell WLAN
> - Linux Driver. All the commands available in Wlanconfig will not be available
> - in the iwpriv.
> -
> -SYNOPSIS
> - iwpriv <ethX> <command> [sub-command] ...
> -
> - iwpriv ethX setregioncode <n>
> - iwpriv ethX getregioncode
> -
> -Version 5 Command:
> - iwpriv ethX ledgpio <n>
> -
> -BT Commands:
> - The blinding table (BT) contains a list of mac addresses that will be,
> - by default, ignored by the firmware. It is also possible to invert this
> - behavior so that we will ignore all traffic except for the portion
> - coming from mac addresess in the list. It is primarily used for
> - debugging and testing networks. It can be edited and inspected with
> - the following commands:
> -
> - iwpriv ethX bt_reset
> - iwpriv ethX bt_add <mac_address>
> - iwpriv ethX bt_del <mac_address>
> - iwpriv ethX bt_list <id>
> - iwpriv ethX bt_get_invert <n>
> - iwpriv ethX bt_set_invert <n>
> -
> -FWT Commands:
> - The forwarding table (FWT) is a feature used to manage mesh network
> - routing in the firmware. The FWT is essentially a routing table that
> - associates a destination mac address (da) with a next hop receiver
> - address (ra). The FWT can be inspected and edited with the following
> - iwpriv commands, which are described in greater detail below.
> - Eventually, the table will be automatically maintained by a custom
> - routing protocol.
> -
> - NOTE: FWT commands replace the previous DFT commands. What were the DFT
> - commands?, you might ask. They were an earlier API to the firmware that
> - implemented a simple MAC-layer forwarding mechanism. In the unlikely
> - event that you were using these commands, you must migrate to the new
> - FWT commands which can be used to achieve the same functionality.
> -
> - iwpriv ethX fwt_add [parameters]
> - iwpriv ethX fwt_del [parameters]
> - iwpriv ethX fwt_lookup [parameters]
> - iwpriv ethX fwt_list [parameters]
> - iwpriv ethX fwt_list_route [parameters]
> - iwpriv ethX fwt_list_neigh [parameters]
> - iwpriv ethX fwt_reset [parameters]
> - iwpriv ethX fwt_cleanup
> - iwpriv ethX fwt_time
> -
> -MESH Commands:
> -
> - The MESH commands are used to configure various features of the mesh
> - routing protocol. The following commands are supported:
> -
> - iwpriv ethX mesh_get_ttl
> - iwpriv ethX mesh_set_ttl ttl
> -
> -DESCRIPTION
> - Those commands are used to send additional commands to the Marvell WLAN
> - card via the Linux device driver.
> -
> - The ethX parameter specifies the network device that is to be used to
> - perform this command on. it could be eth0, eth1 etc.
> -
> -setregioncode
> - This command is used to set the region code in the station.
> - where value is 'region code' for various regions like
> - USA FCC, Canada IC, Spain, France, Europe ETSI, Japan ...
> -
> - Usage:
> - iwpriv ethX setregioncode 0x10: set region code to USA (0x10).
> -
> -getregioncode
> - This command is used to get the region code information set in the
> - station.
> -
> -ledgpio
> - This command is used to set/get LEDs.
> -
> - iwpriv ethX ledgpio <LEDs>
> - will set the corresponding LED for the GPIO Line.
> -
> - iwpriv ethX ledgpio
> - will give u which LEDs are Enabled.
> -
> - Usage:
> - iwpriv eth1 ledgpio 1 0 2 1 3 4
> - will enable
> - LED 1 -> GPIO 0
> - LED 2 -> GPIO 1
> - LED 3 -> GPIO 4
> -
> - iwpriv eth1 ledgpio
> - shows LED information in the format as mentioned above.
> -
> - Note: LED0 is invalid
> - Note: Maximum Number of LEDs are 16.
> -
> -fwt_add
> - This command is used to insert an entry into the FWT table. The list of
> - parameters must follow the following structure:
> -
> - iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr]
> -
> - The parameters between brackets are optional, but they must appear in
> - the order specified. For example, if you want to specify the metric,
> - you must also specify the dir, ssn, and dsn but you need not specify the
> - hopcount, expiration, sleepmode, or snr. Any unspecified parameters
> - will be assigned the defaults specified below.
> -
> - The different parameters are:-
> - da -- DA MAC address in the form 00:11:22:33:44:55
> - ra -- RA MAC address in the form 00:11:22:33:44:55
> - metric -- route metric (cost: smaller-metric routes are
> - preferred, default is 0)
> - dir -- direction (1 for direct, 0 for reverse,
> - default is 1)
> - rate -- data rate used for transmission to the RA,
> - as specified for the rateadapt command,
> - default is 3 (11Mbps)
> - ssn -- Source Sequence Number (time at the RA for
> - reverse routes. Default is 0)
> - dsn -- Destination Sequence Number (time at the DA
> - for direct routes. Default is 0)
> - hopcount -- hop count (currently unused, default is 0)
> - ttl -- TTL (Only used in reverse entries)
> - expiration -- entry expiration (in ticks, where a tick is
> - 1024us, or ~ 1ms. Use 0 for an indefinite
> - entry, default is 0)
> - sleepmode -- RA's sleep mode (currently unused, default is
> - 0)
> - snr -- SNR in the link to RA (currently unused,
> - default is 0)
> -
> - The command does not return anything.
> -
> -fwt_del
> - This command is used to remove an entry to the FWT table. The list of
> - parameters must follow the following structure:
> -
> - iwpriv ethX fwt_del da ra [dir]
> -
> - where the different parameters are:-
> - da -- DA MAC address (in the form "00:11:22:33:44:55")
> - ra -- RA MAC address (in the form "00:11:22:33:44:55")
> - dir -- direction (1 for direct, 0 for reverse,
> - default is 1)
> -
> - The command does not return anything.
> -
> -fwt_lookup
> - This command is used to get the best route in the FWT table to a given
> - host. The only parameter is the MAC address of the host that is being
> - looked for.
> -
> - iwpriv ethX fwt_lookup da
> -
> - where:-
> - da -- DA MAC address (in the form "00:11:22:33:44:55")
> -
> - The command returns an output string identical to the one returned by
> - fwt_list described below.
> -
> -
> -fwt_list
> - This command is used to list a route from the FWT table. The only
> - parameter is the index into the table. If you want to list all the
> - routes in a table, start with index=0, and keep listing until you get a
> - "(null)" string. Note that the indicies may change as the fwt is
> - updated. It is expected that most users will not use fwt_list directly,
> - but that a utility similar to the traditional route command will be used
> - to invoke fwt_list over and over.
> -
> - iwpriv ethX fwt_list index
> -
> - The output is a string of the following form:
> -
> - da ra valid metric dir rate ssn dsn hopcount ttl expiration
> - sleepmode snr precursor
> -
> - where the different fields are:-
> - da -- DA MAC address (in the form "00:11:22:33:44:55")
> - ra -- RA MAC address (in the form "00:11:22:33:44:55")
> - valid -- whether the route is valid (0 if not valid)
> - metric -- route metric (cost: smaller-metric routes are preferred)
> - dir -- direction (1 for direct, 0 for reverse)
> - rate -- data rate used for transmission to the RA,
> - as specified for the rateadapt command
> - ssn -- Source Sequence Number (time at the RA for reverse routes)
> - dsn -- Destination Sequence Number (time at the DA for direct routes)
> - hopcount -- hop count (currently unused)
> - ttl -- TTL (only used in reverse entries)
> - expiration -- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
> - sleepmode -- RA's sleep mode (currently unused)
> - snr -- SNR in the link to RA (currently unused)
> - precursor -- predecessor in direct routes
> -
> -fwt_list_route
> - This command is equivalent to fwt_list.
> -
> -fwt_list_neigh
> - This command is used to list a neighbor from the FWT table. The only
> - parameter is the neighbor ID. If you want to list all the neighbors in a
> - table, start with nid=0, and keep incrementing nid until you get a
> - "(null)" string. Note that the nid from a fwt_list_route command can be
> - used as an input to this command. Also note that this command is meant
> - mostly for debugging. It is expected that users will use fwt_lookup.
> - One important reason for this is that the neighbor id may change as the
> - neighbor table is altered.
> -
> - iwpriv ethX fwt_list_neigh nid
> -
> - The output is a string of the following form:
> -
> - ra sleepmode snr references
> -
> - where the different fields are:-
> - ra -- RA MAC address (in the form "00:11:22:33:44:55")
> - sleepmode -- RA's sleep mode (currently unused)
> - snr -- SNR in the link to RA (currently unused)
> - references -- RA's reference counter
> -
> -fwt_reset
> - This command is used to reset the FWT table, getting rid of all the
> - entries. There are no input parameters.
> -
> - iwpriv ethX fwt_reset
> -
> - The command does not return anything.
> -
> -fwt_cleanup
> - This command is used to perform user-based garbage recollection. The
> - FWT table is checked, and all the entries that are expired or invalid
> - are cleaned. Note that this is exported to the driver for debugging
> - purposes, as garbage collection is also fired by the firmware when in
> - space problems. There are no input parameters.
> -
> - iwpriv ethX fwt_cleanup
> -
> - The command does returns the number of invalid/expired routes deleted.
> -
> -fwt_time
> - This command returns a card's internal time representation. It is this
> - time that is used to represent the expiration times of FWT entries. The
> - number is not consistent from card to card; it is simply a timer count.
> - The fwt_time command is used to inspect the timer so that expiration
> - times reported by fwt_list can be properly interpreted.
> -
> - iwpriv ethX fwt_time
> -
> -mesh_get_ttl
> -
> - The mesh ttl is the number of hops a mesh packet can traverse before it
> - is dropped. This parameter is used to prevent infinite loops in the
> - mesh network. The value returned by this function is the ttl assigned
> - to all mesh packets. Currently there is no way to control the ttl on a
> - per packet or per socket basis.
> -
> - iwpriv ethX mesh_get_ttl
> -
> -mesh_set_ttl ttl
> -
> - Set the ttl. The argument must be between 0 and 255.
> -
> - iwpriv ethX mesh_set_ttl <ttl>
> -
> =========================
> ETHTOOL
> =========================
> diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
> index f67efa0..afd5617 100644
> --- a/drivers/net/wireless/libertas/assoc.c
> +++ b/drivers/net/wireless/libertas/assoc.c
> @@ -323,6 +323,8 @@ static int assoc_helper_secinfo(wlan_private *priv,
> {
> wlan_adapter *adapter = priv->adapter;
> int ret = 0;
> + u32 do_wpa;
> + u32 rsn = 0;
>
> lbs_deb_enter(LBS_DEB_ASSOC);
>
> @@ -333,12 +335,34 @@ static int assoc_helper_secinfo(wlan_private *priv,
> if (ret)
> goto out;
>
> - /* enable/disable RSN */
> + /* If RSN is already enabled, don't try to enable it again, since
> + * ENABLE_RSN resets internal state machines and will clobber the
> + * 4-way WPA handshake.
> + */
> +
> + /* Get RSN enabled/disabled */
> ret = libertas_prepare_and_send_command(priv,
> cmd_802_11_enable_rsn,
> cmd_act_set,
> cmd_option_waitforrsp,
> - 0, assoc_req);
> + 0, &rsn);
> + if (ret) {
> + lbs_deb_assoc("Failed to get RSN status: %d", ret);
> + goto out;
> + }
> +
> + /* Don't re-enable RSN if it's already enabled */
> + do_wpa = (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled);
> + if (do_wpa == rsn)
> + goto out;
> +
> + /* Set RSN enabled/disabled */
> + rsn = do_wpa;
> + ret = libertas_prepare_and_send_command(priv,
> + cmd_802_11_enable_rsn,
> + cmd_act_set,
> + cmd_option_waitforrsp,
> + 0, &rsn);
>
> out:
> lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
> index 124e029..13f6528 100644
> --- a/drivers/net/wireless/libertas/cmd.c
> +++ b/drivers/net/wireless/libertas/cmd.c
> @@ -228,17 +228,19 @@ static int wlan_cmd_802_11_enable_rsn(wlan_private * priv,
> void * pdata_buf)
> {
> struct cmd_ds_802_11_enable_rsn *penableRSN = &cmd->params.enbrsn;
> - struct assoc_request * assoc_req = pdata_buf;
> + u32 * enable = pdata_buf;
>
> lbs_deb_enter(LBS_DEB_CMD);
>
> cmd->command = cpu_to_le16(cmd_802_11_enable_rsn);
> cmd->size = cpu_to_le16(sizeof(*penableRSN) + S_DS_GEN);
> penableRSN->action = cpu_to_le16(cmd_action);
> - if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
> - penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
> - } else {
> - penableRSN->enable = cpu_to_le16(cmd_disable_rsn);
> +
> + if (cmd_action == cmd_act_set) {
> + if (*enable)
> + penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
> + else
> + penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
> }
>
> lbs_deb_leave(LBS_DEB_CMD);
> diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
> index 0c3b9a5..6ac0d47 100644
> --- a/drivers/net/wireless/libertas/cmdresp.c
> +++ b/drivers/net/wireless/libertas/cmdresp.c
> @@ -537,6 +537,24 @@ static int wlan_ret_get_log(wlan_private * priv,
> return 0;
> }
>
> +static int libertas_ret_802_11_enable_rsn(wlan_private * priv,
> + struct cmd_ds_command *resp)
> +{
> + struct cmd_ds_802_11_enable_rsn *enable_rsn = &resp->params.enbrsn;
> + wlan_adapter *adapter = priv->adapter;
> + u32 * pdata_buf = adapter->cur_cmd->pdata_buf;
> +
> + lbs_deb_enter(LBS_DEB_CMD);
> +
> + if (enable_rsn->action == cpu_to_le16(cmd_act_get)) {
> + if (pdata_buf)
> + *pdata_buf = (u32) le16_to_cpu(enable_rsn->enable);
> + }
> +
> + lbs_deb_enter(LBS_DEB_CMD);
> + return 0;
> +}
> +
> static inline int handle_cmd_response(u16 respcmd,
> struct cmd_ds_command *resp,
> wlan_private *priv)
> @@ -610,7 +628,10 @@ static inline int handle_cmd_response(u16 respcmd,
> case cmd_ret_802_11_authenticate:
> case cmd_ret_802_11_radio_control:
> case cmd_ret_802_11_beacon_stop:
> + break;
> +
> case cmd_ret_802_11_enable_rsn:
> + ret = libertas_ret_802_11_enable_rsn(priv, resp);
> break;
>
> case cmd_ret_802_11_data_rate:
> diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
> index 3acf939..09b898f 100644
> --- a/drivers/net/wireless/libertas/hostcmd.h
> +++ b/drivers/net/wireless/libertas/hostcmd.h
> @@ -503,7 +503,7 @@ struct cmd_ds_802_11_ad_hoc_join {
> struct cmd_ds_802_11_enable_rsn {
> __le16 action;
> __le16 enable;
> -};
> +} __attribute__ ((packed));
>
> struct MrvlIEtype_keyParamSet {
> /* type ID */
> diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c
> deleted file mode 100644
> index f410815..0000000
> --- a/drivers/net/wireless/libertas/ioctl.c
> +++ /dev/null
> @@ -1,1081 +0,0 @@
> -/**
> - * This file contains ioctl functions
> - */
> -
> -#include <linux/ctype.h>
> -#include <linux/delay.h>
> -#include <linux/if.h>
> -#include <linux/if_arp.h>
> -#include <linux/wireless.h>
> -
> -#include <net/iw_handler.h>
> -#include <net/ieee80211.h>
> -
> -#include "host.h"
> -#include "radiotap.h"
> -#include "decl.h"
> -#include "defs.h"
> -#include "dev.h"
> -#include "join.h"
> -#include "wext.h"
> -
> -#define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN + \
> - IW_ESSID_MAX_SIZE + \
> - IW_EV_UINT_LEN + IW_EV_FREQ_LEN + \
> - IW_EV_QUAL_LEN + IW_ESSID_MAX_SIZE + \
> - IW_EV_PARAM_LEN + 40) /* 40 for WPAIE */
> -
> -#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
> -
> -static int wlan_set_region(wlan_private * priv, u16 region_code)
> -{
> - int i;
> - int ret = 0;
> -
> - for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
> - // use the region code to search for the index
> - if (region_code == libertas_region_code_to_index[i]) {
> - priv->adapter->regiontableindex = (u16) i;
> - priv->adapter->regioncode = region_code;
> - break;
> - }
> - }
> -
> - // if it's unidentified region code
> - if (i >= MRVDRV_MAX_REGION_CODE) {
> - lbs_deb_ioctl("region Code not identified\n");
> - ret = -1;
> - goto done;
> - }
> -
> - if (libertas_set_regiontable(priv, priv->adapter->regioncode, 0)) {
> - ret = -EINVAL;
> - }
> -
> -done:
> - lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
> - return ret;
> -}
> -
> -static inline int hex2int(char c)
> -{
> - if (c >= '0' && c <= '9')
> - return (c - '0');
> - if (c >= 'a' && c <= 'f')
> - return (c - 'a' + 10);
> - if (c >= 'A' && c <= 'F')
> - return (c - 'A' + 10);
> - return -1;
> -}
> -
> -/* Convert a string representation of a MAC address ("xx:xx:xx:xx:xx:xx")
> - into binary format (6 bytes).
> -
> - This function expects that each byte is represented with 2 characters
> - (e.g., 11:2:11:11:11:11 is invalid)
> -
> - */
> -static char *eth_str2addr(char *ethstr, u8 * addr)
> -{
> - int i, val, val2;
> - char *pos = ethstr;
> -
> - /* get rid of initial blanks */
> - while (*pos == ' ' || *pos == '\t')
> - ++pos;
> -
> - for (i = 0; i < 6; i++) {
> - val = hex2int(*pos++);
> - if (val < 0)
> - return NULL;
> - val2 = hex2int(*pos++);
> - if (val2 < 0)
> - return NULL;
> - addr[i] = (val * 16 + val2) & 0xff;
> -
> - if (i < 5 && *pos++ != ':')
> - return NULL;
> - }
> - return pos;
> -}
> -
> -/* this writes xx:xx:xx:xx:xx:xx into ethstr
> - (ethstr must have space for 18 chars) */
> -static int eth_addr2str(u8 * addr, char *ethstr)
> -{
> - int i;
> - char *pos = ethstr;
> -
> - for (i = 0; i < 6; i++) {
> - sprintf(pos, "%02x", addr[i] & 0xff);
> - pos += 2;
> - if (i < 5)
> - *pos++ = ':';
> - }
> - return 17;
> -}
> -
> -/**
> - * @brief Add an entry to the BT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_add_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char ethaddrs_str[18];
> - char *pos;
> - u8 ethaddr[ETH_ALEN];
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
> - sizeof(ethaddrs_str)))
> - return -EFAULT;
> -
> - if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
> - lbs_pr_info("BT_ADD: Invalid MAC address\n");
> - return -EINVAL;
> - }
> -
> - lbs_deb_ioctl("BT: adding %s\n", ethaddrs_str);
> - ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
> - cmd_act_bt_access_add,
> - cmd_option_waitforrsp, 0, ethaddr);
> - lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * @brief Delete an entry from the BT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_del_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char ethaddrs_str[18];
> - u8 ethaddr[ETH_ALEN];
> - char *pos;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(ethaddrs_str, wrq->u.data.pointer,
> - sizeof(ethaddrs_str)))
> - return -EFAULT;
> -
> - if ((pos = eth_str2addr(ethaddrs_str, ethaddr)) == NULL) {
> - lbs_pr_info("Invalid MAC address\n");
> - return -EINVAL;
> - }
> -
> - lbs_deb_ioctl("BT: deleting %s\n", ethaddrs_str);
> -
> - return (libertas_prepare_and_send_command(priv,
> - cmd_bt_access,
> - cmd_act_bt_access_del,
> - cmd_option_waitforrsp, 0, ethaddr));
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Reset all entries from the BT table
> - * @param priv A pointer to wlan_private structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_reset_ioctl(wlan_private * priv)
> -{
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - lbs_pr_alert( "BT: resetting\n");
> -
> - return (libertas_prepare_and_send_command(priv,
> - cmd_bt_access,
> - cmd_act_bt_access_reset,
> - cmd_option_waitforrsp, 0, NULL));
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief List an entry from the BT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_list_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - int pos;
> - char *addr1;
> - struct iwreq *wrq = (struct iwreq *)req;
> - /* used to pass id and store the bt entry returned by the FW */
> - union {
> - u32 id;
> - char addr1addr2[2 * ETH_ALEN];
> - } param;
> - static char outstr[64];
> - char *pbuf = outstr;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(outstr, wrq->u.data.pointer, sizeof(outstr))) {
> - lbs_deb_ioctl("Copy from user failed\n");
> - return -1;
> - }
> - param.id = simple_strtoul(outstr, NULL, 10);
> - pos = sprintf(pbuf, "%d: ", param.id);
> - pbuf += pos;
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
> - cmd_act_bt_access_list,
> - cmd_option_waitforrsp, 0,
> - (char *)¶m);
> -
> - if (ret == 0) {
> - addr1 = param.addr1addr2;
> -
> - pos = sprintf(pbuf, "BT includes node ");
> - pbuf += pos;
> - pos = eth_addr2str(addr1, pbuf);
> - pbuf += pos;
> - } else {
> - sprintf(pbuf, "(null)");
> - pbuf += pos;
> - }
> -
> - wrq->u.data.length = strlen(outstr);
> - if (copy_to_user(wrq->u.data.pointer, (char *)outstr,
> - wrq->u.data.length)) {
> - lbs_deb_ioctl("BT_LIST: Copy to user failed!\n");
> - return -EFAULT;
> - }
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0 ;
> -}
> -
> -/**
> - * @brief Sets inverted state of blacklist (non-zero if inverted)
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_set_invert_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - int ret;
> - struct iwreq *wrq = (struct iwreq *)req;
> - union {
> - u32 id;
> - char addr1addr2[2 * ETH_ALEN];
> - } param;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - param.id = SUBCMD_DATA(wrq) ;
> - ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
> - cmd_act_bt_access_set_invert,
> - cmd_option_waitforrsp, 0,
> - (char *)¶m);
> - if (ret != 0)
> - return -EFAULT;
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Gets inverted state of blacklist (non-zero if inverted)
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_bt_get_invert_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - int ret;
> - union {
> - u32 id;
> - char addr1addr2[2 * ETH_ALEN];
> - } param;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_bt_access,
> - cmd_act_bt_access_get_invert,
> - cmd_option_waitforrsp, 0,
> - (char *)¶m);
> -
> - if (ret == 0)
> - wrq->u.param.value = le32_to_cpu(param.id);
> - else
> - return -EFAULT;
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Find the next parameter in an input string
> - * @param ptr A pointer to the input parameter string
> - * @return A pointer to the next parameter, or 0 if no parameters left.
> - */
> -static char * next_param(char * ptr)
> -{
> - if (!ptr) return NULL;
> - while (*ptr == ' ' || *ptr == '\t') ++ptr;
> - return (*ptr == '\0') ? NULL : ptr;
> -}
> -
> -/**
> - * @brief Add an entry to the FWT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_add_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[128];
> - static struct cmd_ds_fwt_access fwt_access;
> - char *ptr;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
> - return -EFAULT;
> -
> - if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
> - lbs_pr_alert( "FWT_ADD: Invalid MAC address 1\n");
> - return -EINVAL;
> - }
> -
> - if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
> - lbs_pr_alert( "FWT_ADD: Invalid MAC address 2\n");
> - return -EINVAL;
> - }
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.metric =
> - cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> - else
> - fwt_access.metric = cpu_to_le32(FWT_DEFAULT_METRIC);
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.dir = FWT_DEFAULT_DIR;
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.rate = (u8) simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.rate = FWT_DEFAULT_RATE;
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.ssn =
> - cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> - else
> - fwt_access.ssn = cpu_to_le32(FWT_DEFAULT_SSN);
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.dsn =
> - cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> - else
> - fwt_access.dsn = cpu_to_le32(FWT_DEFAULT_DSN);
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.hopcount = simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.hopcount = FWT_DEFAULT_HOPCOUNT;
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.ttl = simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.ttl = FWT_DEFAULT_TTL;
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.expiration =
> - cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> - else
> - fwt_access.expiration = cpu_to_le32(FWT_DEFAULT_EXPIRATION);
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.sleepmode = (u8)simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.sleepmode = FWT_DEFAULT_SLEEPMODE;
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.snr =
> - cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> - else
> - fwt_access.snr = cpu_to_le32(FWT_DEFAULT_SNR);
> -
> -#ifdef DEBUG
> - {
> - char ethaddr1_str[18], ethaddr2_str[18];
> - eth_addr2str(fwt_access.da, ethaddr1_str);
> - eth_addr2str(fwt_access.ra, ethaddr2_str);
> - lbs_deb_ioctl("FWT_ADD: adding (da:%s,%i,ra:%s)\n", ethaddr1_str,
> - fwt_access.dir, ethaddr2_str);
> - lbs_deb_ioctl("FWT_ADD: ssn:%u dsn:%u met:%u hop:%u ttl:%u exp:%u slp:%u snr:%u\n",
> - fwt_access.ssn, fwt_access.dsn, fwt_access.metric,
> - fwt_access.hopcount, fwt_access.ttl, fwt_access.expiration,
> - fwt_access.sleepmode, fwt_access.snr);
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_add,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> -
> - lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
> - return ret;
> -}
> -
> -/**
> - * @brief Delete an entry from the FWT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_del_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[64];
> - static struct cmd_ds_fwt_access fwt_access;
> - char *ptr;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
> - return -EFAULT;
> -
> - if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
> - lbs_pr_alert( "FWT_DEL: Invalid MAC address 1\n");
> - return -EINVAL;
> - }
> -
> - if ((ptr = eth_str2addr(ptr, fwt_access.ra)) == NULL) {
> - lbs_pr_alert( "FWT_DEL: Invalid MAC address 2\n");
> - return -EINVAL;
> - }
> -
> - if ((ptr = next_param(ptr)))
> - fwt_access.dir = (u8)simple_strtoul(ptr, &ptr, 10);
> - else
> - fwt_access.dir = FWT_DEFAULT_DIR;
> -
> -#ifdef DEBUG
> - {
> - char ethaddr1_str[18], ethaddr2_str[18];
> - lbs_deb_ioctl("FWT_DEL: line is %s\n", in_str);
> - eth_addr2str(fwt_access.da, ethaddr1_str);
> - eth_addr2str(fwt_access.ra, ethaddr2_str);
> - lbs_deb_ioctl("FWT_DEL: removing (da:%s,ra:%s,dir:%d)\n", ethaddr1_str,
> - ethaddr2_str, fwt_access.dir);
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv,
> - cmd_fwt_access,
> - cmd_act_fwt_access_del,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> - lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
> - return ret;
> -}
> -
> -
> -/**
> - * @brief Print route parameters
> - * @param fwt_access struct cmd_ds_fwt_access with route info
> - * @param buf destination buffer for route info
> - */
> -static void print_route(struct cmd_ds_fwt_access fwt_access, char *buf)
> -{
> - buf += sprintf(buf, " ");
> - buf += eth_addr2str(fwt_access.da, buf);
> - buf += sprintf(buf, " ");
> - buf += eth_addr2str(fwt_access.ra, buf);
> - buf += sprintf(buf, " %u", fwt_access.valid);
> - buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.metric));
> - buf += sprintf(buf, " %u", fwt_access.dir);
> - buf += sprintf(buf, " %u", fwt_access.rate);
> - buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.ssn));
> - buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.dsn));
> - buf += sprintf(buf, " %u", fwt_access.hopcount);
> - buf += sprintf(buf, " %u", fwt_access.ttl);
> - buf += sprintf(buf, " %u", le32_to_cpu(fwt_access.expiration));
> - buf += sprintf(buf, " %u", fwt_access.sleepmode);
> - buf += sprintf(buf, " %u ", le32_to_cpu(fwt_access.snr));
> - buf += eth_addr2str(fwt_access.prec, buf);
> -}
> -
> -/**
> - * @brief Lookup an entry in the FWT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_lookup_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[64];
> - char *ptr;
> - static struct cmd_ds_fwt_access fwt_access;
> - static char out_str[128];
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
> - return -EFAULT;
> -
> - if ((ptr = eth_str2addr(in_str, fwt_access.da)) == NULL) {
> - lbs_pr_alert( "FWT_LOOKUP: Invalid MAC address\n");
> - return -EINVAL;
> - }
> -
> -#ifdef DEBUG
> - {
> - char ethaddr1_str[18];
> - lbs_deb_ioctl("FWT_LOOKUP: line is %s\n", in_str);
> - eth_addr2str(fwt_access.da, ethaddr1_str);
> - lbs_deb_ioctl("FWT_LOOKUP: looking for (da:%s)\n", ethaddr1_str);
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv,
> - cmd_fwt_access,
> - cmd_act_fwt_access_lookup,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> -
> - if (ret == 0)
> - print_route(fwt_access, out_str);
> - else
> - sprintf(out_str, "(null)");
> -
> - wrq->u.data.length = strlen(out_str);
> - if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
> - wrq->u.data.length)) {
> - lbs_deb_ioctl("FWT_LOOKUP: Copy to user failed!\n");
> - return -EFAULT;
> - }
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Reset all entries from the FWT table
> - * @param priv A pointer to wlan_private structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_reset_ioctl(wlan_private * priv)
> -{
> - lbs_deb_ioctl("FWT: resetting\n");
> -
> - return (libertas_prepare_and_send_command(priv,
> - cmd_fwt_access,
> - cmd_act_fwt_access_reset,
> - cmd_option_waitforrsp, 0, NULL));
> -}
> -
> -/**
> - * @brief List an entry from the FWT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_list_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[8];
> - static struct cmd_ds_fwt_access fwt_access;
> - char *ptr = in_str;
> - static char out_str[128];
> - char *pbuf = out_str;
> - int ret = 0;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str))) {
> - ret = -EFAULT;
> - goto out;
> - }
> -
> - fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> -
> -#ifdef DEBUG
> - {
> - lbs_deb_ioctl("FWT_LIST: line is %s\n", in_str);
> - lbs_deb_ioctl("FWT_LIST: listing id:%i\n", le32_to_cpu(fwt_access.id));
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_list,
> - cmd_option_waitforrsp, 0, (void *)&fwt_access);
> -
> - if (ret == 0)
> - print_route(fwt_access, pbuf);
> - else
> - pbuf += sprintf(pbuf, " (null)");
> -
> - wrq->u.data.length = strlen(out_str);
> - if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
> - wrq->u.data.length)) {
> - lbs_deb_ioctl("FWT_LIST: Copy to user failed!\n");
> - ret = -EFAULT;
> - goto out;
> - }
> -
> - ret = 0;
> -
> -out:
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return ret;
> -}
> -
> -/**
> - * @brief List an entry from the FRT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_list_route_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[64];
> - static struct cmd_ds_fwt_access fwt_access;
> - char *ptr = in_str;
> - static char out_str[128];
> - char *pbuf = out_str;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
> - return -EFAULT;
> -
> - fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> -
> -#ifdef DEBUG
> - {
> - lbs_deb_ioctl("FWT_LIST_ROUTE: line is %s\n", in_str);
> - lbs_deb_ioctl("FWT_LIST_ROUTE: listing id:%i\n", le32_to_cpu(fwt_access.id));
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_list_route,
> - cmd_option_waitforrsp, 0, (void *)&fwt_access);
> -
> - if (ret == 0) {
> - print_route(fwt_access, pbuf);
> - } else
> - pbuf += sprintf(pbuf, " (null)");
> -
> - wrq->u.data.length = strlen(out_str);
> - if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
> - wrq->u.data.length)) {
> - lbs_deb_ioctl("FWT_LIST_ROUTE: Copy to user failed!\n");
> - return -EFAULT;
> - }
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief List an entry from the FNT table
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_list_neighbor_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - char in_str[8];
> - static struct cmd_ds_fwt_access fwt_access;
> - char *ptr = in_str;
> - static char out_str[128];
> - char *pbuf = out_str;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if (copy_from_user(in_str, wrq->u.data.pointer, sizeof(in_str)))
> - return -EFAULT;
> -
> - memset(&fwt_access, 0, sizeof(fwt_access));
> - fwt_access.id = cpu_to_le32(simple_strtoul(ptr, &ptr, 10));
> -
> -#ifdef DEBUG
> - {
> - lbs_deb_ioctl("FWT_LIST_NEIGHBOR: line is %s\n", in_str);
> - lbs_deb_ioctl("FWT_LIST_NEIGHBOR: listing id:%i\n", le32_to_cpu(fwt_access.id));
> - }
> -#endif
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_list_neighbor,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> -
> - if (ret == 0) {
> - pbuf += sprintf(pbuf, " ra ");
> - pbuf += eth_addr2str(fwt_access.ra, pbuf);
> - pbuf += sprintf(pbuf, " slp %u", fwt_access.sleepmode);
> - pbuf += sprintf(pbuf, " snr %u", le32_to_cpu(fwt_access.snr));
> - pbuf += sprintf(pbuf, " ref %u", le32_to_cpu(fwt_access.references));
> - } else
> - pbuf += sprintf(pbuf, " (null)");
> -
> - wrq->u.data.length = strlen(out_str);
> - if (copy_to_user(wrq->u.data.pointer, (char *)out_str,
> - wrq->u.data.length)) {
> - lbs_deb_ioctl("FWT_LIST_NEIGHBOR: Copy to user failed!\n");
> - return -EFAULT;
> - }
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Cleans up the route (FRT) and neighbor (FNT) tables
> - * (Garbage Collection)
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - static struct cmd_ds_fwt_access fwt_access;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - lbs_deb_ioctl("FWT: cleaning up\n");
> -
> - memset(&fwt_access, 0, sizeof(fwt_access));
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_cleanup,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> -
> - if (ret == 0)
> - wrq->u.param.value = le32_to_cpu(fwt_access.references);
> - else
> - return -EFAULT;
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Gets firmware internal time (debug purposes)
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - static struct cmd_ds_fwt_access fwt_access;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - lbs_deb_ioctl("FWT: getting time\n");
> -
> - memset(&fwt_access, 0, sizeof(fwt_access));
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_fwt_access,
> - cmd_act_fwt_access_time,
> - cmd_option_waitforrsp, 0,
> - (void *)&fwt_access);
> -
> - if (ret == 0)
> - wrq->u.param.value = le32_to_cpu(fwt_access.references);
> - else
> - return -EFAULT;
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Gets mesh ttl from firmware
> - * @param priv A pointer to wlan_private structure
> - * @param req A pointer to ifreq structure
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
> -{
> - struct iwreq *wrq = (struct iwreq *)req;
> - struct cmd_ds_mesh_access mesh_access;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - memset(&mesh_access, 0, sizeof(mesh_access));
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
> - cmd_act_mesh_get_ttl,
> - cmd_option_waitforrsp, 0,
> - (void *)&mesh_access);
> -
> - if (ret == 0)
> - wrq->u.param.value = le32_to_cpu(mesh_access.data[0]);
> - else
> - return -EFAULT;
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return 0;
> -}
> -
> -/**
> - * @brief Gets mesh ttl from firmware
> - * @param priv A pointer to wlan_private structure
> - * @param ttl New ttl value
> - * @return 0 --success, otherwise fail
> - */
> -static int wlan_mesh_set_ttl_ioctl(wlan_private * priv, int ttl)
> -{
> - struct cmd_ds_mesh_access mesh_access;
> - int ret;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - if( (ttl > 0xff) || (ttl < 0) )
> - return -EINVAL;
> -
> - memset(&mesh_access, 0, sizeof(mesh_access));
> - mesh_access.data[0] = cpu_to_le32(ttl);
> -
> - ret = libertas_prepare_and_send_command(priv, cmd_mesh_access,
> - cmd_act_mesh_set_ttl,
> - cmd_option_waitforrsp, 0,
> - (void *)&mesh_access);
> -
> - if (ret != 0)
> - ret = -EFAULT;
> -
> - lbs_deb_leave(LBS_DEB_IOCTL);
> - return ret;
> -}
> -
> -/**
> - * @brief ioctl function - entry point
> - *
> - * @param dev A pointer to net_device structure
> - * @param req A pointer to ifreq structure
> - * @param cmd command
> - * @return 0--success, otherwise fail
> - */
> -int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
> -{
> - int subcmd = 0;
> - int idata = 0;
> - int *pdata;
> - int ret = 0;
> - wlan_private *priv = dev->priv;
> - wlan_adapter *adapter = priv->adapter;
> - struct iwreq *wrq = (struct iwreq *)req;
> -
> - lbs_deb_enter(LBS_DEB_IOCTL);
> -
> - lbs_deb_ioctl("libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
> - switch (cmd) {
> - case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
> - switch (wrq->u.data.flags) {
> - case WLAN_SUBCMD_BT_RESET: /* bt_reset */
> - wlan_bt_reset_ioctl(priv);
> - break;
> - case WLAN_SUBCMD_FWT_RESET: /* fwt_reset */
> - wlan_fwt_reset_ioctl(priv);
> - break;
> - } /* End of switch */
> - break;
> -
> - case WLAN_SETONEINT_GETNONE:
> - /* The first 4 bytes of req->ifr_data is sub-ioctl number
> - * after 4 bytes sits the payload.
> - */
> - subcmd = wrq->u.data.flags;
> - if (!subcmd)
> - subcmd = (int)wrq->u.param.value;
> -
> - switch (subcmd) {
> - case WLANSETREGION:
> - idata = SUBCMD_DATA(wrq);
> - ret = wlan_set_region(priv, (u16) idata);
> - break;
> - case WLAN_SUBCMD_MESH_SET_TTL:
> - idata = SUBCMD_DATA(wrq);
> - ret = wlan_mesh_set_ttl_ioctl(priv, idata);
> - break;
> -
> - case WLAN_SUBCMD_BT_SET_INVERT:
> - ret = wlan_bt_set_invert_ioctl(priv, req);
> - break ;
> -
> - default:
> - ret = -EOPNOTSUPP;
> - break;
> - }
> -
> - break;
> -
> - case WLAN_SET128CHAR_GET128CHAR:
> - switch ((int)wrq->u.data.flags) {
> - case WLAN_SUBCMD_BT_ADD:
> - ret = wlan_bt_add_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_BT_DEL:
> - ret = wlan_bt_del_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_BT_LIST:
> - ret = wlan_bt_list_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_ADD:
> - ret = wlan_fwt_add_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_DEL:
> - ret = wlan_fwt_del_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_LOOKUP:
> - ret = wlan_fwt_lookup_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_LIST_NEIGHBOR:
> - ret = wlan_fwt_list_neighbor_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_LIST:
> - ret = wlan_fwt_list_ioctl(priv, req);
> - break;
> - case WLAN_SUBCMD_FWT_LIST_ROUTE:
> - ret = wlan_fwt_list_route_ioctl(priv, req);
> - break;
> - }
> - break;
> -
> - case WLAN_SETNONE_GETONEINT:
> - switch (wrq->u.param.value) {
> - case WLANGETREGION:
> - pdata = (int *)wrq->u.name;
> - *pdata = (int)adapter->regioncode;
> - break;
> - case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
> - ret = wlan_fwt_cleanup_ioctl(priv, req);
> - break;
> -
> - case WLAN_SUBCMD_FWT_TIME: /* fwt_time */
> - ret = wlan_fwt_time_ioctl(priv, req);
> - break;
> -
> - case WLAN_SUBCMD_MESH_GET_TTL:
> - ret = wlan_mesh_get_ttl_ioctl(priv, req);
> - break;
> -
> - case WLAN_SUBCMD_BT_GET_INVERT:
> - ret = wlan_bt_get_invert_ioctl(priv, req);
> - break ;
> -
> - default:
> - ret = -EOPNOTSUPP;
> -
> - }
> -
> - break;
> -
> - case WLAN_SET_GET_SIXTEEN_INT:
> - switch ((int)wrq->u.data.flags) {
> - case WLAN_LED_GPIO_CTRL:
> - {
> - int i;
> - int data[16];
> -
> - struct cmd_ds_802_11_led_ctrl ctrl;
> - struct mrvlietypes_ledgpio *gpio =
> - (struct mrvlietypes_ledgpio *) ctrl.data;
> -
> - memset(&ctrl, 0, sizeof(ctrl));
> - if (wrq->u.data.length > MAX_LEDS * 2)
> - return -ENOTSUPP;
> - if ((wrq->u.data.length % 2) != 0)
> - return -ENOTSUPP;
> - if (wrq->u.data.length == 0) {
> - ctrl.action =
> - cpu_to_le16
> - (cmd_act_get);
> - } else {
> - if (copy_from_user
> - (data, wrq->u.data.pointer,
> - sizeof(int) *
> - wrq->u.data.length)) {
> - lbs_deb_ioctl(
> - "Copy from user failed\n");
> - return -EFAULT;
> - }
> -
> - ctrl.action =
> - cpu_to_le16
> - (cmd_act_set);
> - ctrl.numled = cpu_to_le16(0);
> - gpio->header.type =
> - cpu_to_le16(TLV_TYPE_LED_GPIO);
> - gpio->header.len = wrq->u.data.length;
> - for (i = 0; i < wrq->u.data.length;
> - i += 2) {
> - gpio->ledpin[i / 2].led =
> - data[i];
> - gpio->ledpin[i / 2].pin =
> - data[i + 1];
> - }
> - }
> - ret =
> - libertas_prepare_and_send_command(priv,
> - cmd_802_11_led_gpio_ctrl,
> - 0,
> - cmd_option_waitforrsp,
> - 0, (void *)&ctrl);
> - for (i = 0; i < gpio->header.len; i += 2) {
> - data[i] = gpio->ledpin[i / 2].led;
> - data[i + 1] = gpio->ledpin[i / 2].pin;
> - }
> - if (copy_to_user(wrq->u.data.pointer, data,
> - sizeof(int) *
> - gpio->header.len)) {
> - lbs_deb_ioctl("Copy to user failed\n");
> - return -EFAULT;
> - }
> -
> - wrq->u.data.length = gpio->header.len;
> - }
> - break;
> - }
> - break;
> -
> - default:
> - ret = -EINVAL;
> - break;
> - }
> -
> - lbs_deb_leave_args(LBS_DEB_IOCTL, "ret %d", ret);
> - return ret;
> -}
> -
> -
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index 623ab4b..4a59306 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -181,7 +181,8 @@ u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
> * @brief Get function for sysfs attribute anycast_mask
> */
> static ssize_t libertas_anycast_get(struct device * dev,
> - struct device_attribute *attr, char * buf) {
> + struct device_attribute *attr, char * buf)
> +{
> struct cmd_ds_mesh_access mesh_access;
>
> memset(&mesh_access, 0, sizeof(mesh_access));
> @@ -197,7 +198,8 @@ static ssize_t libertas_anycast_get(struct device * dev,
> * @brief Set function for sysfs attribute anycast_mask
> */
> static ssize_t libertas_anycast_set(struct device * dev,
> - struct device_attribute *attr, const char * buf, size_t count) {
> + struct device_attribute *attr, const char * buf, size_t count)
> +{
> struct cmd_ds_mesh_access mesh_access;
> uint32_t datum;
>
> @@ -799,7 +801,6 @@ wlan_private *libertas_add_card(void *card, struct device *dmdev)
> dev->open = wlan_open;
> dev->hard_start_xmit = wlan_pre_start_xmit;
> dev->stop = wlan_close;
> - dev->do_ioctl = libertas_do_ioctl;
> dev->set_mac_address = wlan_set_mac_address;
> dev->tx_timeout = wlan_tx_timeout;
> dev->get_stats = wlan_get_stats;
> @@ -918,7 +919,6 @@ int libertas_add_mesh(wlan_private *priv, struct device *dev)
> mesh_dev->open = mesh_open;
> mesh_dev->hard_start_xmit = mesh_pre_start_xmit;
> mesh_dev->stop = mesh_close;
> - mesh_dev->do_ioctl = libertas_do_ioctl;
> mesh_dev->get_stats = wlan_get_stats;
> mesh_dev->set_mac_address = wlan_set_mac_address;
> mesh_dev->ethtool_ops = &libertas_ethtool_ops;
> diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
> index 606af50..c3043dc 100644
> --- a/drivers/net/wireless/libertas/scan.c
> +++ b/drivers/net/wireless/libertas/scan.c
> @@ -215,38 +215,6 @@ done:
> }
>
> /**
> - * @brief Post process the scan table after a new scan command has completed
> - *
> - * Inspect each entry of the scan table and try to find an entry that
> - * matches our current associated/joined network from the scan. If
> - * one is found, update the stored copy of the bssdescriptor for our
> - * current network.
> - *
> - * Debug dump the current scan table contents if compiled accordingly.
> - *
> - * @param priv A pointer to wlan_private structure
> - *
> - * @return void
> - */
> -static void wlan_scan_process_results(wlan_private * priv)
> -{
> - wlan_adapter *adapter = priv->adapter;
> - struct bss_descriptor * iter_bss;
> - int i = 0;
> -
> - if (adapter->connect_status == libertas_connected)
> - return;
> -
> - mutex_lock(&adapter->lock);
> - list_for_each_entry (iter_bss, &adapter->network_list, list) {
> - lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
> - i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
> - escape_essid(iter_bss->ssid, iter_bss->ssid_len));
> - }
> - mutex_unlock(&adapter->lock);
> -}
> -
> -/**
> * @brief Create a channel list for the driver to scan based on region info
> *
> * Use the driver region/band information to construct a comprehensive list
> @@ -791,6 +759,10 @@ int wlan_scan_networks(wlan_private * priv,
> u8 scancurrentchanonly;
> int maxchanperscan;
> int ret;
> +#ifdef CONFIG_LIBERTAS_DEBUG
> + struct bss_descriptor * iter_bss;
> + int i = 0;
> +#endif
>
> lbs_deb_enter(LBS_DEB_ASSOC);
>
> @@ -832,11 +804,16 @@ int wlan_scan_networks(wlan_private * priv,
> puserscanin,
> full_scan);
>
> - /* Process the resulting scan table:
> - * - Remove any bad ssids
> - * - Update our current BSS information from scan data
> - */
> - wlan_scan_process_results(priv);
> +#ifdef CONFIG_LIBERTAS_DEBUG
> + /* Dump the scan table */
> + mutex_lock(&adapter->lock);
> + list_for_each_entry (iter_bss, &adapter->network_list, list) {
> + lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
> + i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
> + escape_essid(iter_bss->ssid, iter_bss->ssid_len));
> + }
> + mutex_unlock(&adapter->lock);
> +#endif
>
> if (priv->adapter->connect_status == libertas_connected) {
> netif_carrier_on(priv->dev);
> diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
> index 8939251..f42b796 100644
> --- a/drivers/net/wireless/libertas/wext.c
> +++ b/drivers/net/wireless/libertas/wext.c
> @@ -913,148 +913,6 @@ out:
> return 0;
> }
>
> -/*
> - * iwpriv settable callbacks
> - */
> -
> -static const iw_handler wlan_private_handler[] = {
> - NULL, /* SIOCIWFIRSTPRIV */
> -};
> -
> -static const struct iw_priv_args wlan_private_args[] = {
> - /*
> - * { cmd, set_args, get_args, name }
> - */
> - /* Using iwpriv sub-command feature */
> - {
> - WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - IW_PRIV_TYPE_NONE,
> - ""},
> - {
> - WLANSETREGION,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - IW_PRIV_TYPE_NONE,
> - "setregioncode"},
> - {
> - WLAN_SUBCMD_MESH_SET_TTL,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - IW_PRIV_TYPE_NONE,
> - "mesh_set_ttl"},
> - {
> - WLAN_SETNONE_GETONEINT,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - ""},
> - {
> - WLANGETREGION,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - "getregioncode"},
> - {
> - WLAN_SUBCMD_FWT_CLEANUP,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - "fwt_cleanup"},
> - {
> - WLAN_SUBCMD_FWT_TIME,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - "fwt_time"},
> - {
> - WLAN_SUBCMD_MESH_GET_TTL,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - "mesh_get_ttl"},
> - {
> - WLAN_SETNONE_GETNONE,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_NONE,
> - ""},
> - {
> - WLAN_SUBCMD_FWT_RESET,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_NONE,
> - "fwt_reset"},
> - {
> - WLAN_SUBCMD_BT_RESET,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_NONE,
> - "bt_reset"},
> - {
> - WLAN_SET128CHAR_GET128CHAR,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - ""},
> - /* BT Management */
> - {
> - WLAN_SUBCMD_BT_ADD,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "bt_add"},
> - {
> - WLAN_SUBCMD_BT_DEL,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "bt_del"},
> - {
> - WLAN_SUBCMD_BT_LIST,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "bt_list"},
> - {
> - WLAN_SUBCMD_BT_SET_INVERT,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - IW_PRIV_TYPE_NONE,
> - "bt_set_invert"},
> - {
> - WLAN_SUBCMD_BT_GET_INVERT,
> - IW_PRIV_TYPE_NONE,
> - IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
> - "bt_get_invert"},
> - /* FWT Management */
> - {
> - WLAN_SUBCMD_FWT_ADD,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_add"},
> - {
> - WLAN_SUBCMD_FWT_DEL,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_del"},
> - {
> - WLAN_SUBCMD_FWT_LOOKUP,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_lookup"},
> - {
> - WLAN_SUBCMD_FWT_LIST_NEIGHBOR,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_list_neigh"},
> - {
> - WLAN_SUBCMD_FWT_LIST,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_list"},
> - {
> - WLAN_SUBCMD_FWT_LIST_ROUTE,
> - IW_PRIV_TYPE_CHAR | 128,
> - IW_PRIV_TYPE_CHAR | 128,
> - "fwt_list_route"},
> - {
> - WLAN_SET_GET_SIXTEEN_INT,
> - IW_PRIV_TYPE_INT | 16,
> - IW_PRIV_TYPE_INT | 16,
> - ""},
> - {
> - WLAN_LED_GPIO_CTRL,
> - IW_PRIV_TYPE_INT | 16,
> - IW_PRIV_TYPE_INT | 16,
> - "ledgpio"},
> -};
> -
> static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
> {
> enum {
> @@ -2444,22 +2302,12 @@ static const iw_handler mesh_wlan_handler[] = {
> };
> struct iw_handler_def libertas_handler_def = {
> .num_standard = sizeof(wlan_handler) / sizeof(iw_handler),
> - .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
> - .num_private_args = sizeof(wlan_private_args) /
> - sizeof(struct iw_priv_args),
> .standard = (iw_handler *) wlan_handler,
> - .private = (iw_handler *) wlan_private_handler,
> - .private_args = (struct iw_priv_args *)wlan_private_args,
> .get_wireless_stats = wlan_get_wireless_stats,
> };
>
> struct iw_handler_def mesh_handler_def = {
> .num_standard = sizeof(mesh_wlan_handler) / sizeof(iw_handler),
> - .num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
> - .num_private_args = sizeof(wlan_private_args) /
> - sizeof(struct iw_priv_args),
> .standard = (iw_handler *) mesh_wlan_handler,
> - .private = (iw_handler *) wlan_private_handler,
> - .private_args = (struct iw_priv_args *)wlan_private_args,
> .get_wireless_stats = wlan_get_wireless_stats,
> };
> diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
> index d555056..3d5196c 100644
> --- a/drivers/net/wireless/libertas/wext.h
> +++ b/drivers/net/wireless/libertas/wext.h
> @@ -7,45 +7,6 @@
> #define SUBCMD_OFFSET 4
> #define SUBCMD_DATA(x) *((int *)(x->u.name + SUBCMD_OFFSET))
>
> -/** PRIVATE CMD ID */
> -#define WLANIOCTL SIOCIWFIRSTPRIV
> -
> -#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
> -#define WLAN_SUBCMD_BT_RESET 13
> -#define WLAN_SUBCMD_FWT_RESET 14
> -
> -#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
> -#define WLANGETREGION 1
> -
> -#define WLAN_SUBCMD_FWT_CLEANUP 15
> -#define WLAN_SUBCMD_FWT_TIME 16
> -#define WLAN_SUBCMD_MESH_GET_TTL 17
> -#define WLAN_SUBCMD_BT_GET_INVERT 18
> -
> -#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
> -#define WLANSETREGION 8
> -#define WLAN_SUBCMD_MESH_SET_TTL 18
> -#define WLAN_SUBCMD_BT_SET_INVERT 19
> -
> -#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
> -#define WLAN_SUBCMD_BT_ADD 18
> -#define WLAN_SUBCMD_BT_DEL 19
> -#define WLAN_SUBCMD_BT_LIST 20
> -#define WLAN_SUBCMD_FWT_ADD 21
> -#define WLAN_SUBCMD_FWT_DEL 22
> -#define WLAN_SUBCMD_FWT_LOOKUP 23
> -#define WLAN_SUBCMD_FWT_LIST_NEIGHBOR 24
> -#define WLAN_SUBCMD_FWT_LIST 25
> -#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
> -
> -#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
> -#define WLAN_LED_GPIO_CTRL 5
> -
> -#define WLAN_LINKMODE_802_3 0
> -#define WLAN_LINKMODE_802_11 2
> -#define WLAN_RADIOMODE_NONE 0
> -#define WLAN_RADIOMODE_RADIOTAP 2
> -
> /** wlan_ioctl_regrdwr */
> struct wlan_ioctl_regrdwr {
> /** Which register to access */
> @@ -57,9 +18,13 @@ struct wlan_ioctl_regrdwr {
> u32 value;
> };
>
> +#define WLAN_LINKMODE_802_3 0
> +#define WLAN_LINKMODE_802_11 2
> +#define WLAN_RADIOMODE_NONE 0
> +#define WLAN_RADIOMODE_RADIOTAP 2
> +
> extern struct iw_handler_def libertas_handler_def;
> extern struct iw_handler_def mesh_handler_def;
> -int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int i);
> int wlan_radio_ioctl(wlan_private * priv, u8 option);
>
> #endif /* _WLAN_WEXT_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
