Hello all, I gave the current wireless-dev git tree a try to get some exposure to the new mac80211 stack. I have a HP nx6325 with what lspci call a Network controller: Broadcom Corporation BCM4310 UART (rev 01) Compiling and installing the kernel worked without a problem, but the bcm43xx driver complains with the message in the subject line. The full dmesg log: bcm43xx driver bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off bcm43xx: PHY connected bcm43xx: Microcode rev 0x15f, pl 0x7e (2006-07-29 05:54:02) bcm43xx: Firmware: no support for microcode extracted from version 4.x binary drivers. bcm43xx: core_up for active 802.11 core failed (-95) bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: Microcode rev 0x15f, pl 0x7e (2006-07-29 05:54:02) bcm43xx: Firmware: no support for microcode extracted from version 4.x binary drivers. bcm43xx: core_up for active 802.11 core failed (-95) bcm43xx: Microcode rev 0x15f, pl 0x7e (2006-07-29 05:54:02) bcm43xx: Firmware: no support for microcode extracted from version 4.x binary drivers. bcm43xx: core_up for active 802.11 core failed (-95) bcm43xx: Microcode rev 0x15f, pl 0x7e (2006-07-29 05:54:02) bcm43xx: Firmware: no support for microcode extracted from version 4.x binary drivers. bcm43xx: core_up for active 802.11 core failed (-95) The firmware is from the openwrt archive suggested under http://linuxwireless.org/en/users/Drivers/bcm43xx Now I'm at somewhat lost. Is there an even newer firmware (I tried the one from the NDIS bcmwl5.sys as well)? -- Thanks in advance and kind regards Joerg __________________________________ Yahoo! Clever - Der einfachste Weg, Fragen zu stellen und Wissenswertes mit Anderen zu teilen. www.yahoo.de/clever - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
