From: mabbas <mabbas@xxxxxxxxxxxxxxx>
The WEXT ioctl SIOCSIWRATE is not implemented in mac80211. This patch
adds the missing routine. It supports the 'auto' keyword, fixed rates,
and the combination of 'auto' and a fixed rate to select an upper bound.
Signed-off-by: mabbas <mabbas@xxxxxxxxxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
Index: wireless-dev/net/mac80211/ieee80211_ioctl.c
===================================================================
--- wireless-dev.orig/net/mac80211/ieee80211_ioctl.c
+++ wireless-dev/net/mac80211/ieee80211_ioctl.c
@@ -2013,6 +2013,54 @@ static int ieee80211_ioctl_giwscan(struc
}
+static int ieee80211_ioctl_siwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw_mode *mode;
+ int i;
+ u32 target_rate = rate->value /100000;
+ u32 fixed = rate->fixed;
+ u32 supp = 0;
+ struct ieee80211_sub_if_data *sdata;
+ struct sta_info *sta;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ mode = local->oper_hw_mode;
+ /* value = -1, fixed = 0 means auto only, so use all rates
+ * value = X, fixed = 1 means only rate X
+ * value = X, fixed = 0 means all rates <= X */
+ for (i=0; i< mode->num_rates; i++) {
+ struct ieee80211_rate *rates = &mode->rates[i];
+ int target = rates->rate;
+
+ if (mode->mode == MODE_ATHEROS_TURBO ||
+ mode->mode == MODE_ATHEROS_TURBOG)
+ target *= 2;
+ if ((target_rate == target) && fixed) {
+ supp |= BIT(i);
+ sdata->u.ap.force_unicast_rateidx = i;
+ break;
+ }
+ if ((!fixed && (target_rate >= target)) || (rate->value < 0)) {
+ supp |= BIT(i);
+ if (target_rate == target)
+ sdata->u.ap.force_unicast_rateidx = i;
+ }
+ }
+ sdata->u.sta.restricted_tx_rates = supp;
+ sdata->u.ap.max_ratectrl_rateidx = sdata->u.ap.force_unicast_rateidx;
+ if (sdata->type == IEEE80211_IF_TYPE_STA) {
+ sta = sta_info_get(local, sdata->u.sta.bssid);
+ if (sta) {
+ sta->txrate = sdata->u.ap.max_ratectrl_rateidx;
+ sta_info_put(sta);
+ }
+ }
+ return 0;
+}
+
static int ieee80211_ioctl_giwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
@@ -3159,7 +3207,7 @@ static const iw_handler ieee80211_handle
(iw_handler) NULL, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* SIOCSIWRATE */
+ (iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */
(iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
(iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */
(iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */
Index: wireless-dev/net/mac80211/ieee80211_i.h
===================================================================
--- wireless-dev.orig/net/mac80211/ieee80211_i.h
+++ wireless-dev/net/mac80211/ieee80211_i.h
@@ -269,6 +269,7 @@ struct ieee80211_if_sta {
unsigned long ibss_join_req;
struct sk_buff *probe_resp; /* ProbeResp template for IBSS */
u32 supp_rates_bits;
+ u32 restricted_tx_rates; /* bitmap of user restricted tx rate */
int wmm_last_param_set;
};
Index: wireless-dev/net/mac80211/ieee80211_sta.c
===================================================================
--- wireless-dev.orig/net/mac80211/ieee80211_sta.c
+++ wireless-dev/net/mac80211/ieee80211_sta.c
@@ -1255,7 +1255,6 @@ static void ieee80211_rx_mgmt_assoc_resp
rates |= BIT(j);
}
sta->supp_rates = rates;
-
if (elems.ht_extra_param && elems.ht_cap_param && elems.wmm_param &&
ifsta->ht_enabled && local->ops->conf_ht){
int rc;
@@ -3176,6 +3175,7 @@ struct sta_info * ieee80211_ibss_add_sta
return NULL;
sta->supp_rates = sdata->u.sta.supp_rates_bits;
+ /* restricted suup rate if the user specifies it */
rate_control_rate_init(sta, local);
Index: wireless-dev/net/mac80211/rc80211_simple.c
===================================================================
--- wireless-dev.orig/net/mac80211/rc80211_simple.c
+++ wireless-dev/net/mac80211/rc80211_simple.c
@@ -38,6 +38,7 @@ static void rate_control_rate_inc(struct
struct ieee80211_hw_mode *mode;
int i = sta->txrate;
int maxrate;
+ u32 supp;
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
@@ -45,6 +46,9 @@ static void rate_control_rate_inc(struct
return;
}
+ supp = sta->supp_rates & sdata->u.sta.restricted_tx_rates;
+ if (supp == 0)
+ supp = sta->supp_rates;
mode = local->oper_hw_mode;
maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
@@ -53,7 +57,7 @@ static void rate_control_rate_inc(struct
while (i + 1 < mode->num_rates) {
i++;
- if (sta->supp_rates & BIT(i) &&
+ if (supp & BIT(i) &&
mode->rates[i].flags & IEEE80211_RATE_SUPPORTED &&
(maxrate < 0 || i <= maxrate)) {
sta->txrate = i;
@@ -69,6 +73,7 @@ static void rate_control_rate_dec(struct
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hw_mode *mode;
int i = sta->txrate;
+ u32 supp;
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
@@ -80,9 +85,12 @@ static void rate_control_rate_dec(struct
if (i > mode->num_rates)
i = mode->num_rates;
+ supp = sta->supp_rates & sdata->u.sta.restricted_tx_rates;
+ if (supp == 0)
+ supp = sta->supp_rates;
while (i > 0) {
i--;
- if (sta->supp_rates & BIT(i) &&
+ if (supp & BIT(i) &&
mode->rates[i].flags & IEEE80211_RATE_SUPPORTED) {
sta->txrate = i;
break;
@@ -234,6 +242,7 @@ rate_control_simple_get_rate(void *priv,
struct sta_info *sta;
int rateidx, nonerp_idx;
u16 fc;
+ u32 supp;
memset(extra, 0, sizeof(*extra));
@@ -261,11 +270,14 @@ rate_control_simple_get_rate(void *priv,
rateidx = mode->num_rates - 1;
sta->last_txrate = rateidx;
+ supp = sta->supp_rates & sdata->u.sta.restricted_tx_rates;
+ if (supp == 0)
+ supp = sta->supp_rates;
nonerp_idx = rateidx;
while (nonerp_idx > 0 &&
((mode->rates[nonerp_idx].flags & IEEE80211_RATE_ERP) ||
!(mode->rates[nonerp_idx].flags & IEEE80211_RATE_SUPPORTED) ||
- !(sta->supp_rates & BIT(nonerp_idx))))
+ !(supp & BIT(nonerp_idx))))
nonerp_idx--;
extra->nonerp = &mode->rates[nonerp_idx];
@@ -281,6 +293,7 @@ static void rate_control_simple_rate_ini
{
struct ieee80211_hw_mode *mode;
int i;
+
sta->txrate = 0;
mode = local->oper_hw_mode;
/* TODO: what is a good starting rate for STA? About middle? Maybe not
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
