Hi all, First, the good news: bcm43xx-mac80211 in wireless-dev now works about as well for me as the old driver. Similar connection reliability, upload speed and download speed. Woo! But I've got ton's of these in my log: BUG: at net/mac80211/ieee80211.c:1280 ieee80211_tx() Call Trace: [<ffffffff805866a3>] ieee80211_master_start_xmit+0x5f3/0x680 [<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0 [<ffffffff804e4781>] __qdisc_run+0xd1/0x260 [<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370 [<ffffffff8058a45b>] ieee80211_subif_start_xmit+0x34b/0x590 [<ffffffff804ce3a7>] kfree_skb+0x17/0x30 [<ffffffff804d447d>] dev_hard_start_xmit+0x26d/0x2d0 [<ffffffff804e4781>] __qdisc_run+0xd1/0x260 [<ffffffff804d6a87>] dev_queue_xmit+0x1a7/0x370 [<ffffffff804f9bef>] ip_output+0x19f/0x340 [<ffffffff804f9069>] ip_queue_xmit+0x219/0x430 [<ffffffff80295fe0>] __pollwait+0x0/0x110 [<ffffffff8050a82e>] tcp_transmit_skb+0x40e/0x7c0 [<ffffffff8022ce00>] default_wake_function+0x0/0x10 [<ffffffff8050c4bb>] __tcp_push_pending_frames+0x11b/0x940 [<ffffffff8059c6a8>] csum_partial_copy_from_user+0x88/0x120 [<ffffffff80500b66>] tcp_sendmsg+0x876/0xc80 [<ffffffff8022ce0d>] default_wake_function+0xd/0x10 [<ffffffff8022ba37>] __wake_up_common+0x47/0x70 [<ffffffff8051e795>] inet_sendmsg+0x45/0x80 [<ffffffff804c7161>] sock_aio_write+0x101/0x110 [<ffffffff80286071>] do_sync_write+0xf1/0x130 [<ffffffff80246f80>] autoremove_wake_function+0x0/0x40 [<ffffffff8023688e>] current_fs_time+0x3e/0x40 [<ffffffff80286999>] vfs_write+0x159/0x170 [<ffffffff80286fa0>] sys_write+0x50/0x90 [<ffffffff8020a1ae>] system_call+0x7e/0x83 Kernel: wireless-dev latest from git Arch: x86-64 My boot log is attached for full hardware information. -- Will Dyson
[ 0.000000] Linux version 2.6.22-rc2-wifidev0 (will@zod) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 PREEMPT Tue May 22 21:42:43 EDT 2007 [ 0.000000] Command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F8FA0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT BFFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP BFFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT BFFF3180, 48C1 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS BFFF0000, 0040 [ 0.000000] ACPI: SSDT BFFF7B80, 00B5 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: SRAT BFFF7C80, 0090 (r1 AMD HAMMER 1 AMD 1) [ 0.000000] ACPI: APIC BFFF7AC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786416 [ 0.000000] On node 0 totalpages: 786319 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1510 pages reserved [ 0.000000] DMA zone: 2433 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10695 pages used for memmap [ 0.000000] DMA32 zone: 771625 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) [ 0.000000] Built 1 zonelists. Total pages: 774058 [ 0.000000] Kernel command line: root=/dev/sda2 ro console=ttyS0,115200n8r console=tty0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 31.075884] time.c: Detected 1808.831 MHz processor. [ 31.076920] Console: colour VGA+ 80x25 [ 31.081178] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 31.085085] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 31.086413] Checking aperture... [ 31.086449] CPU 0: aperture @ f0000000 size 128 MB [ 31.118310] Memory: 3089632k/3145664k available (3723k kernel code, 55316k reserved, 1581k data, 204k init) [ 31.177835] Calibrating delay using timer specific routine.. 3618.69 BogoMIPS (lpj=1809346) [ 31.177945] Mount-cache hash table entries: 256 [ 31.178085] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 31.178121] CPU: L2 Cache: 512K (64 bytes/line) [ 31.178164] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 [ 31.178250] ACPI: Core revision 20070126 [ 31.192208] Using local APIC timer interrupts. [ 31.247516] result 12561331 [ 31.247548] Detected 12.561 MHz APIC timer. [ 31.247925] NET: Registered protocol family 16 [ 31.248052] No dock devices found. [ 31.248147] ACPI: bus type pci registered [ 31.248188] PCI: Using configuration type 1 [ 31.253257] ACPI: Interpreter enabled [ 31.253294] ACPI: (supports S0 S1 S4 S5) [ 31.253450] ACPI: Using IOAPIC for interrupt routing [ 31.263052] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 31.263093] PCI: Probing PCI hardware (bus 00) [ 31.263690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 31.263880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 31.264215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 31.321009] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 31.321488] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 31.321968] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 31.322495] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 31.322974] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 31.323451] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 31.323929] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 31.324405] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 31.324883] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 31.325410] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 31.325893] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 31.326371] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 31.326850] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 31.327326] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 31.327855] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 31.328382] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 31.328920] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 31.329409] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 31.329917] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 31.330232] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 31.330546] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 31.330887] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 31.331146] ACPI: PCI Interrupt Link [APC5] (IRQs *16) [ 31.331446] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 31.331835] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0 [ 31.332221] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 31.332606] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled. [ 31.333017] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 31.333403] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 31.333790] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 31.334176] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 31.334561] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 31.334973] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled. [ 31.335381] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 31.335799] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 31.336193] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 31.336515] ACPI: Power Resource [ISAV] (on) [ 31.336564] Linux Plug and Play Support v0.97 (c) Adam Belay [ 31.336607] pnp: PnP ACPI init [ 31.336646] ACPI: bus type pnp registered [ 31.341119] pnp: PnP ACPI: found 12 devices [ 31.341154] ACPI: ACPI bus type pnp unregistered [ 31.341221] Generic PHY: Registered new driver [ 31.341337] SCSI subsystem initialized [ 31.341392] libata version 2.20 loaded. [ 31.341440] usbcore: registered new interface driver usbfs [ 31.341499] usbcore: registered new interface driver hub [ 31.341559] usbcore: registered new device driver usb [ 31.341632] PCI: Using ACPI for IRQ routing [ 31.341668] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 31.341720] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 31.341857] agpgart: Detected AGP bridge 0 [ 31.341894] agpgart: Setting up Nforce3 AGP. [ 31.346221] agpgart: AGP aperture is 128M @ 0xf0000000 [ 31.346322] ACPI: RTC can wake from S4 [ 31.346381] pnp: 00:00: ioport range 0x4000-0x407f has been reserved [ 31.346417] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 31.346454] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 31.346490] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved [ 31.346526] pnp: 00:00: ioport range 0x4800-0x487f has been reserved [ 31.346562] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved [ 31.346602] pnp: 00:01: iomem range 0xd0000-0xd3fff has been reserved [ 31.346638] pnp: 00:01: iomem range 0xd5000-0xd7fff has been reserved [ 31.346674] pnp: 00:01: iomem range 0xf0000-0xfbfff could not be reserved [ 31.346710] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved [ 31.346771] Time: tsc clocksource has been installed. [ 31.347336] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 31.347377] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 31.400642] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 31.407768] PCI: Bridge: 0000:00:0b.0 [ 31.407803] IO window: 9000-9fff [ 31.407838] MEM window: fdf00000-fdffffff [ 31.407874] PREFETCH window: e0000000-efffffff [ 31.407911] PCI: Bridge: 0000:00:0e.0 [ 31.407945] IO window: 8000-8fff [ 31.407979] MEM window: fde00000-fdefffff [ 31.408013] PREFETCH window: fdd00000-fddfffff [ 31.408053] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 31.408078] NET: Registered protocol family 2 [ 31.416773] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.417480] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 31.421146] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 31.421660] TCP: Hash tables configured (established 262144 bind 65536) [ 31.421697] TCP reno registered [ 31.425313] Total HugeTLB memory allocated, 0 [ 31.425508] io scheduler noop registered [ 31.425542] io scheduler anticipatory registered (default) [ 31.425586] io scheduler cfq registered [ 31.469745] Boot video device is 0000:01:00.0 [ 31.470119] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 31.470161] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 31.470298] radeonfb: Found Intel x86 BIOS ROM Image [ 31.470334] radeonfb: Retrieved PLL infos from BIOS [ 31.470370] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz [ 31.470415] radeonfb: PLL min 20000 max 40000 [ 31.759268] i2c-adapter i2c-2: unable to read EDID block. [ 31.878225] i2c-adapter i2c-2: unable to read EDID block. [ 31.997181] i2c-adapter i2c-2: unable to read EDID block. [ 32.116250] i2c-adapter i2c-3: unable to read EDID block. [ 32.235206] i2c-adapter i2c-3: unable to read EDID block. [ 32.354162] i2c-adapter i2c-3: unable to read EDID block. [ 32.397399] radeonfb: Monitor 1 type DFP found [ 32.397433] radeonfb: EDID probed [ 32.397465] radeonfb: Monitor 2 type no found [ 32.429101] Console: switching to colour frame buffer device 160x64 [ 32.453039] mtrr: base(0xe8000000) is not aligned on a size(0x10000000) boundary [ 32.453234] radeonfb (0000:01:00.0): ATI Radeon Ya [ 32.453471] input: Power Button (FF) as /class/input/input0 [ 32.453624] ACPI: Power Button (FF) [PWRF] [ 32.453785] input: Power Button (CM) as /class/input/input1 [ 32.453936] ACPI: Power Button (CM) [PWRB] [ 32.482998] Real Time Clock Driver v1.12ac [ 32.483205] Linux agpgart interface v0.102 (c) Dave Jones [ 32.483385] [drm] Initialized drm 1.1.0 20060810 [ 32.483629] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 32.483798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 32.484553] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.549440] loop: module loaded [ 34.559694] Marvell 88E1101: Registered new driver [ 34.571650] Marvell 88E1111: Registered new driver [ 34.583513] Marvell 88E1145: Registered new driver [ 34.595253] QS6612: Registered new driver [ 34.606337] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 34.621427] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 34.634487] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) -> IRQ 23 [ 34.650877] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 34.842588] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00006c260b] [ 35.162601] eth0: forcedeth.c: subsystem: 01462:0250 bound to 0000:00:05.0 [ 35.177206] tun: Universal TUN/TAP device driver, 1.6 [ 35.189980] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 35.204060] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded [ 35.217697] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 35.231407] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 [ 35.248344] eth1: RTL8169s/8110s at 0xffffc20000014000, 00:11:09:8f:4b:52, IRQ 16 [ 35.267157] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 35.281629] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 35.297723] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 [ 35.311694] NFORCE3-250: chipset revision 162 [ 35.323939] NFORCE3-250: not 100% native mode: will probe irqs later [ 35.338316] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller [ 35.352440] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA [ 35.367826] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA [ 35.383190] Probing IDE interface ide0... [ 36.054129] hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive [ 36.374065] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 36.388205] Probing IDE interface ide1... [ 36.906783] Probing IDE interface ide1... [ 37.426208] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) [ 37.442064] Uniform CD-ROM driver Revision: 3.20 [ 37.455887] sata_nv 0000:00:09.0: version 3.3 [ 37.456273] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 37.470259] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22 [ 37.487460] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 37.487504] scsi0 : sata_nv [ 37.498639] scsi1 : sata_nv [ 37.509670] ata1: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 0 [ 37.528385] ata2: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 0 [ 38.000352] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.034729] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 38.051028] ata1.00: ATA-6: WDC WD1600SD-01KCB0, 08.02D08, max UDMA/133 [ 38.066313] ata1.00: 312581808 sectors, multi 16: LBA48 [ 38.085672] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 38.101900] ata1.00: configured for UDMA/133 [ 38.568143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.586156] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 38.602433] ata2.00: ATA-7: Maxtor 6L250S0, BANC1G10, max UDMA/133 [ 38.617284] ata2.00: 490234752 sectors, multi 16: LBA48 NCQ (not used) [ 38.637151] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 38.653703] ata2.00: configured for UDMA/133 [ 38.667032] scsi 0:0:0:0: Direct-Access ATA WDC WD1600SD-01K 08.0 PQ: 0 ANSI: 5 [ 38.684453] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 38.700994] sd 0:0:0:0: [sda] Write Protect is off [ 38.715135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 38.715147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.733781] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 38.750536] sd 0:0:0:0: [sda] Write Protect is off [ 38.764888] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 38.764900] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.783597] sda: sda1 sda2 sda3 [ 38.812893] sd 0:0:0:0: [sda] Attached SCSI disk [ 38.827153] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 38.842119] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L250S0 BANC PQ: 0 ANSI: 5 [ 38.860002] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) [ 38.876940] sd 1:0:0:0: [sdb] Write Protect is off [ 38.891510] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 38.891522] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.910518] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) [ 38.927613] sd 1:0:0:0: [sdb] Write Protect is off [ 38.942343] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 38.942355] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.961431] sdb: sdb1 sdb2 sdb3 [ 38.995056] sd 1:0:0:0: [sdb] Attached SCSI disk [ 39.009640] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 39.025325] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 39.041110] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 21 (level, high) -> IRQ 21 [ 39.060258] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 39.060288] scsi2 : sata_nv [ 39.073379] scsi3 : sata_nv [ 39.086327] ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001b000 irq 0 [ 39.106864] ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001b008 irq 0 [ 39.429826] ata3: SATA link down (SStatus 0 SControl 300) [ 39.747708] ata4: SATA link down (SStatus 0 SControl 300) [ 39.763457] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 39.779205] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20 [ 39.798177] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 39.798181] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 39.813603] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 39.831174] ehci_hcd 0000:00:02.2: debug port 1 [ 39.845724] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 39.845733] ehci_hcd 0000:00:02.2: irq 20, io mem 0xfe02d000 [ 39.861338] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 39.878890] usb usb1: configuration #1 chosen from 1 choice [ 39.894360] hub 1-0:1.0: USB hub found [ 39.907984] hub 1-0:1.0: 8 ports detected [ 40.022675] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 40.022989] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 40.038592] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, high) -> IRQ 23 [ 40.057390] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 40.057393] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 40.072709] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 40.090167] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 40.158646] usb usb2: configuration #1 chosen from 1 choice [ 40.174160] hub 2-0:1.0: USB hub found [ 40.187779] hub 2-0:1.0: 4 ports detected [ 40.302835] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 [ 40.318338] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 22 [ 40.336969] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 40.336972] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 40.352149] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 40.369387] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 40.437541] usb usb3: configuration #1 chosen from 1 choice [ 40.452887] hub 3-0:1.0: USB hub found [ 40.466327] hub 3-0:1.0: 4 ports detected [ 40.874297] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 41.085446] usb 2-3: configuration #1 chosen from 1 choice [ 41.363118] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 41.570293] usb 3-3: configuration #1 chosen from 1 choice [ 41.587303] usbcore: registered new interface driver libusual [ 41.602751] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 41.618547] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 41.885260] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 41.899883] mice: PS/2 mouse device common for all mice [ 41.914783] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 41.930421] rtc_cmos: probe of 00:05 failed with error -16 [ 41.945341] i2c /dev entries driver [ 41.958452] usbcore: registered new interface driver hiddev [ 41.980308] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 41.996537] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-3 [ 42.014720] usbcore: registered new interface driver usbhid [ 42.029692] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.045348] Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 16 09:45:46 2007 UTC). [ 42.064212] input: AT Translated Set 2 keyboard as /class/input/input3 [ 42.080413] ALSA device list: [ 42.092893] No soundcards found. [ 42.105734] IPv4 over IPv4 tunneling driver [ 42.119382] GRE over IPv4 tunneling driver [ 42.132825] ip_tables: (C) 2000-2006 Netfilter Core Team [ 42.147404] TCP cubic registered [ 42.159838] Initializing XFRM netlink socket [ 42.173252] NET: Registered protocol family 1 [ 42.186622] NET: Registered protocol family 10 [ 42.200022] lo: Disabled Privacy Extensions [ 42.213133] tunl0: Disabled Privacy Extensions [ 42.226456] IPv6 over IPv4 tunneling driver [ 42.239456] sit0: Disabled Privacy Extensions [ 42.252429] NET: Registered protocol family 17 [ 42.265559] NET: Registered protocol family 15 [ 42.278484] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) [ 42.295914] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 42.310052] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 42.324499] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 42.359493] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 42.375224] ReiserFS: sda2: using ordered data mode [ 42.390775] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 42.424801] ReiserFS: sda2: checking transaction log (sda2) [ 42.472400] ReiserFS: sda2: Using r5 hash to sort names [ 42.486657] VFS: Mounted root (reiserfs filesystem) readonly. [ 42.501437] Freeing unused kernel memory: 204k freed [ 45.632106] i2c-adapter i2c-4: nForce2 SMBus adapter at 0x4c00 [ 45.647000] i2c-adapter i2c-5: nForce2 SMBus adapter at 0x4c40 [ 45.720888] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 [ 45.735768] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 21 [ 45.753883] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 45.880576] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 45.900990] usbcore: registered new interface driver usblp [ 45.916052] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 45.989535] parport_pc 00:0a: reported by Plug and Play ACPI [ 46.004712] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 46.140509] intel8x0_measure_ac97_clock: measured 50715 usecs [ 46.155762] intel8x0: clocking to 46814 [ 46.284556] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 46.299793] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 46.318250] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243) [ 46.335079] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) [ 46.351980] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243) [ 46.368386] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243) [ 46.384510] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243) [ 46.400559] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243) [ 46.417316] ssb: Ignoring additional 802.11 core [ 46.434678] ssb: Switching to PCI core, index 4 [ 46.448692] ssb: Sonics Silicon Backplane found on PCI device 0000:02:07.0 [ 46.465130] bcm43xx_mac80211: Broadcom 4306 WLAN found [ 46.479787] ssb: Switching to IEEE 802.11 core, index 1 [ 46.501268] bcm43xx_mac80211: Found PHY: Analog 1, Type 2, Revision 1 [ 46.517334] bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 [ 46.541260] bcm43xx_mac80211: Radio turned off [ 46.555449] wmaster0: Selected rate control algorithm 'simple' [ 47.074260] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 56.413386] w83627hf: Found W83627THF chip at 0x290 [ 56.429428] w83627hf w83627hf.656: Reading VID from GPIO5 [ 56.551910] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx [ 57.003895] md: bind<sdb3> [ 57.045167] md: raid1 personality registered for level 1 [ 57.061317] raid1: raid set md1 active with 1 out of 2 mirrors [ 57.103692] md: bind<sdb1> [ 57.121320] raid1: raid set md0 active with 1 out of 2 mirrors [ 58.142249] fuse init (API version 7.8) [ 58.195209] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 58.195222] ReiserFS: sda3: using ordered data mode [ 58.220745] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 58.222426] ReiserFS: sda3: checking transaction log (sda3) [ 58.286751] ReiserFS: sda3: Using r5 hash to sort names [ 58.327342] kjournald starting. Commit interval 5 seconds [ 58.327796] EXT3 FS on sdb2, internal journal [ 58.327800] EXT3-fs: mounted filesystem with ordered data mode. [ 58.387473] kjournald starting. Commit interval 5 seconds [ 58.420715] EXT3 FS on dm-2, internal journal [ 58.420719] EXT3-fs: mounted filesystem with ordered data mode. [ 58.469210] kjournald starting. Commit interval 5 seconds [ 58.475009] EXT3 FS on dm-1, internal journal [ 58.475013] EXT3-fs: mounted filesystem with ordered data mode. [ 58.503126] Adding 1048568k swap on /dev/vg0/swap. Priority:-1 extents:1 across:1048568k [ 60.729470] bcm43xx_mac80211: Adding Interface type 2 [ 60.744090] ssb: Switching to PCI core, index 4 [ 60.744095] ssb: Switching to IEEE 802.11 core, index 1 [ 61.036718] bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 61.036727] ssb: Switching to ChipCommon core, index 0 [ 61.036734] ssb: Switching to IEEE 802.11 core, index 1 [ 61.044914] bcm43xx_mac80211: Radio turned on [ 61.044917] bcm43xx_mac80211: Radio enabled by hardware [ 61.062801] bcm43xx_mac80211: Chip initialized [ 61.063091] bcm43xx_mac80211: 30-bit DMA initialized [ 61.063124] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063129] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063132] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063137] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063141] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063145] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063149] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063154] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063157] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063162] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063166] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063170] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063174] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063179] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063182] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.063187] bcm43xx_mac80211: TODO: Incomplete code in keymac_write() at drivers/net/wireless/mac80211/bcm43xx/bcm43xx_main.c:724 [ 61.080373] bcm43xx_mac80211: Wireless interface started [ 61.084329] HW CONFIG: channel=1 freq=2412 phymode=3 [ 61.095127] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 62.235543] HW CONFIG: channel=1 freq=2412 phymode=3 [ 62.304515] HW CONFIG: channel=2 freq=2417 phymode=3 [ 62.381486] HW CONFIG: channel=3 freq=2422 phymode=3 [ 62.458461] HW CONFIG: channel=4 freq=2427 phymode=3 [ 62.535433] HW CONFIG: channel=5 freq=2432 phymode=3 [ 62.612403] HW CONFIG: channel=6 freq=2437 phymode=3 [ 62.689375] HW CONFIG: channel=7 freq=2442 phymode=3 [ 62.766344] HW CONFIG: channel=8 freq=2447 phymode=3 [ 62.843316] HW CONFIG: channel=9 freq=2452 phymode=3 [ 62.920288] HW CONFIG: channel=10 freq=2457 phymode=3 [ 62.997260] HW CONFIG: channel=11 freq=2462 phymode=3 [ 63.074232] HW CONFIG: channel=1 freq=2412 phymode=3 [ 63.082479] HW CONFIG: channel=11 freq=2462 phymode=3 [ 63.090539] wlan0: Initial auth_alg=0 [ 63.090543] wlan0: authenticate with AP 00:0d:0b:fd:86:39 [ 63.092108] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0) [ 63.092112] wlan0: authenticated [ 63.092115] wlan0: associate with AP 00:0d:0b:fd:86:39 [ 63.096462] wlan0: RX AssocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2) [ 63.096466] wlan0: associated [ 63.096486] wmaster0: Added STA 00:0d:0b:fd:86:39 [ 63.099206] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 67.053817] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15) [ 67.053821] wlan0: deauthenticated [ 68.053420] wlan0: authenticate with AP 00:0d:0b:fd:86:39 [ 68.054958] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0) [ 68.054961] wlan0: authenticated [ 68.054964] wlan0: associate with AP 00:0d:0b:fd:86:39 [ 68.057426] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2) [ 68.057428] wlan0: associated [ 68.087407] HW CONFIG: channel=1 freq=2412 phymode=3 [ 68.164377] HW CONFIG: channel=2 freq=2417 phymode=3 [ 68.241349] HW CONFIG: channel=3 freq=2422 phymode=3 [ 68.318321] HW CONFIG: channel=4 freq=2427 phymode=3 [ 68.395293] HW CONFIG: channel=5 freq=2432 phymode=3 [ 68.472265] HW CONFIG: channel=6 freq=2437 phymode=3 [ 68.549237] HW CONFIG: channel=7 freq=2442 phymode=3 [ 68.626209] HW CONFIG: channel=8 freq=2447 phymode=3 [ 68.703180] HW CONFIG: channel=9 freq=2452 phymode=3 [ 68.780152] HW CONFIG: channel=10 freq=2457 phymode=3 [ 68.857125] HW CONFIG: channel=11 freq=2462 phymode=3 [ 68.934097] HW CONFIG: channel=11 freq=2462 phymode=3 [ 72.021951] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15) [ 72.021954] wlan0: deauthenticated [ 73.020611] wlan0: authenticate with AP 00:0d:0b:fd:86:39 [ 73.022204] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0) [ 73.022207] wlan0: authenticated [ 73.022210] wlan0: associate with AP 00:0d:0b:fd:86:39 [ 73.025177] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2) [ 73.025180] wlan0: associated [ 73.054598] HW CONFIG: channel=1 freq=2412 phymode=3 [ 73.131567] HW CONFIG: channel=2 freq=2417 phymode=3 [ 73.208539] HW CONFIG: channel=3 freq=2422 phymode=3 [ 73.285511] HW CONFIG: channel=4 freq=2427 phymode=3 [ 73.362483] HW CONFIG: channel=5 freq=2432 phymode=3 [ 73.439455] HW CONFIG: channel=6 freq=2437 phymode=3 [ 73.516427] HW CONFIG: channel=7 freq=2442 phymode=3 [ 73.593399] HW CONFIG: channel=8 freq=2447 phymode=3 [ 73.670371] HW CONFIG: channel=9 freq=2452 phymode=3 [ 73.747342] HW CONFIG: channel=10 freq=2457 phymode=3 [ 73.824315] HW CONFIG: channel=11 freq=2462 phymode=3 [ 73.901287] HW CONFIG: channel=11 freq=2462 phymode=3 [ 74.153194] wlan0: no IPv6 routers present [ 76.982900] wlan0: RX deauthentication from 00:0d:0b:fd:86:39 (reason=15) [ 76.982903] wlan0: deauthenticated [ 77.981802] wlan0: authenticate with AP 00:0d:0b:fd:86:39 [ 77.994011] wlan0: RX authentication from 00:0d:0b:fd:86:39 (alg=0 transaction=2 status=0) [ 77.994014] wlan0: authenticated [ 77.994016] wlan0: associate with AP 00:0d:0b:fd:86:39 [ 77.996499] wlan0: RX ReassocResp from 00:0d:0b:fd:86:39 (capab=0x431 status=0 aid=2) [ 77.996502] wlan0: associated [ 78.025787] HW CONFIG: channel=1 freq=2412 phymode=3 [ 78.102755] HW CONFIG: channel=2 freq=2417 phymode=3 [ 78.179727] HW CONFIG: channel=3 freq=2422 phymode=3 [ 78.256699] HW CONFIG: channel=4 freq=2427 phymode=3 [ 78.333672] HW CONFIG: channel=5 freq=2432 phymode=3 [ 78.410643] HW CONFIG: channel=6 freq=2437 phymode=3 [ 78.487615] HW CONFIG: channel=7 freq=2442 phymode=3 [ 78.564587] HW CONFIG: channel=8 freq=2447 phymode=3 [ 78.641559] HW CONFIG: channel=9 freq=2452 phymode=3 [ 78.718531] HW CONFIG: channel=10 freq=2457 phymode=3 [ 78.795503] HW CONFIG: channel=11 freq=2462 phymode=3 [ 78.872476] HW CONFIG: channel=11 freq=2462 phymode=3 [ 78.995129] bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: 00:0d:0b:fd:86:39 [ 89.404270] ppdev: user-space parallel port driver [ 94.598972] Marking TSC unstable due to cpufreq changes [ 94.599379] Time: acpi_pm clocksource has been installed. [ 99.840547] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 99.840623] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 99.840660] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 99.991649] [drm] Setting GART location based on new memory map [ 99.991656] [drm] Loading R200 Microcode [ 99.991684] [drm] writeback test succeeded in 1 usecs [ 111.311440] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 262 (2620/10) [ 152.460495] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 24 (265/11) [ 187.232837] wmaster0: STA 00:0d:0b:fd:86:39 Average rate: 10 (10/1)
