The CONFIG_BCM947XX configuration variable was designed for use by the
embedded device used by the OpenWRT project. The device has been shifted
to the ssb driver in bcm43xx-mac80211 and will not be used with SoftMAC.
Accordingly, this "dead" configuration variable is removed.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
bcm43xx.h | 18 ++----------
bcm43xx_dma.c | 4 --
bcm43xx_main.c | 81 ---------------------------------------------------------
bcm43xx_main.h | 19 -------------
4 files changed, 4 insertions(+), 118 deletions(-)
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -658,12 +658,6 @@ struct bcm43xx_pio {
#define BCM43xx_MAX_80211_CORES 2
-#ifdef CONFIG_BCM947XX
-#define core_offset(bcm) (bcm)->current_core_offset
-#else
-#define core_offset(bcm) 0
-#endif
-
/* Generic information about a core. */
struct bcm43xx_coreinfo {
u8 available:1,
@@ -789,10 +783,6 @@ struct bcm43xx_private {
/* The currently active core. */
struct bcm43xx_coreinfo *current_core;
-#ifdef CONFIG_BCM947XX
- /** current core memory offset */
- u32 current_core_offset;
-#endif
struct bcm43xx_coreinfo *active_80211_core;
/* coreinfo structs for all possible cores follow.
* Note that a core might not exist.
@@ -943,25 +933,25 @@ struct bcm43xx_lopair * bcm43xx_get_lopa
static inline
u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
{
- return ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
+ return ioread16(bcm->mmio_addr + offset);
}
static inline
void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
{
- iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
+ iowrite16(value, bcm->mmio_addr + offset);
}
static inline
u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
{
- return ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
+ return ioread32(bcm->mmio_addr + offset);
}
static inline
void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
{
- iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
+ iowrite32(value, bcm->mmio_addr + offset);
}
static inline
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -660,10 +660,6 @@ struct bcm43xx_dmaring * bcm43xx_setup_d
ring->routing = BCM43xx_DMA32_CLIENTTRANS;
if (dma64)
ring->routing = BCM43xx_DMA64_CLIENTTRANS;
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0)
- ring->routing = dma64 ? BCM43xx_DMA64_NOTRANS : BCM43xx_DMA32_NOTRANS;
-#endif
ring->bcm = bcm;
ring->nr_slots = nr_slots;
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -61,10 +61,6 @@ MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_BCM947XX
-extern char *nvram_get(char *name);
-#endif
-
#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
@@ -142,10 +138,6 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for
{ PCI_VENDOR_ID_BROADCOM, 0x4324, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/* Broadcom 43XG 802.11b/g */
{ PCI_VENDOR_ID_BROADCOM, 0x4325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-#ifdef CONFIG_BCM947XX
- /* SB bus on BCM947xx */
- { PCI_VENDOR_ID_BROADCOM, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-#endif
{ 0 },
};
MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl);
@@ -786,9 +778,6 @@ static int bcm43xx_sprom_extract(struct
{
u16 value;
u16 *sprom;
-#ifdef CONFIG_BCM947XX
- char *c;
-#endif
sprom = kzalloc(BCM43xx_SPROM_SIZE * sizeof(u16),
GFP_KERNEL);
@@ -796,28 +785,7 @@ static int bcm43xx_sprom_extract(struct
printk(KERN_ERR PFX "sprom_extract OOM\n");
return -ENOMEM;
}
-#ifdef CONFIG_BCM947XX
- sprom[BCM43xx_SPROM_BOARDFLAGS2] = atoi(nvram_get("boardflags2"));
- sprom[BCM43xx_SPROM_BOARDFLAGS] = atoi(nvram_get("boardflags"));
-
- if ((c = nvram_get("il0macaddr")) != NULL)
- e_aton(c, (char *) &(sprom[BCM43xx_SPROM_IL0MACADDR]));
-
- if ((c = nvram_get("et1macaddr")) != NULL)
- e_aton(c, (char *) &(sprom[BCM43xx_SPROM_ET1MACADDR]));
-
- sprom[BCM43xx_SPROM_PA0B0] = atoi(nvram_get("pa0b0"));
- sprom[BCM43xx_SPROM_PA0B1] = atoi(nvram_get("pa0b1"));
- sprom[BCM43xx_SPROM_PA0B2] = atoi(nvram_get("pa0b2"));
-
- sprom[BCM43xx_SPROM_PA1B0] = atoi(nvram_get("pa1b0"));
- sprom[BCM43xx_SPROM_PA1B1] = atoi(nvram_get("pa1b1"));
- sprom[BCM43xx_SPROM_PA1B2] = atoi(nvram_get("pa1b2"));
-
- sprom[BCM43xx_SPROM_BOARDREV] = atoi(nvram_get("boardrev"));
-#else
bcm43xx_sprom_read(bcm, sprom);
-#endif
/* boardflags2 */
value = sprom[BCM43xx_SPROM_BOARDFLAGS2];
@@ -1225,12 +1193,6 @@ static int _switch_core(struct bcm43xx_p
goto error;
udelay(10);
}
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0)
- bcm->current_core_offset = 0x1000 * core;
- else
- bcm->current_core_offset = 0;
-#endif
return 0;
error:
@@ -1387,19 +1349,6 @@ void bcm43xx_wireless_core_reset(struct
if ((bcm43xx_core_enabled(bcm)) &&
!bcm43xx_using_pio(bcm)) {
-//FIXME: Do we _really_ want #ifndef CONFIG_BCM947XX here?
-#if 0
-#ifndef CONFIG_BCM947XX
- /* reset all used DMA controllers. */
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA2_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA3_BASE);
- bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
- bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA1_BASE);
- if (bcm->current_core->rev < 5)
- bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA4_BASE);
-#endif
-#endif
}
if (bcm43xx_status(bcm) == BCM43xx_STAT_SHUTTINGDOWN) {
bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD,
@@ -2140,32 +2089,11 @@ out:
return err;
}
-#ifdef CONFIG_BCM947XX
-static struct pci_device_id bcm43xx_47xx_ids[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
- { 0 }
-};
-#endif
-
static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm)
{
int err;
bcm->irq = bcm->pci_dev->irq;
-#ifdef CONFIG_BCM947XX
- if (bcm->pci_dev->bus->number == 0) {
- struct pci_dev *d;
- struct pci_device_id *id;
- for (id = bcm43xx_47xx_ids; id->vendor; id++) {
- d = pci_get_device(id->vendor, id->device, NULL);
- if (d != NULL) {
- bcm->irq = d->irq;
- pci_dev_put(d);
- break;
- }
- }
- }
-#endif
err = request_irq(bcm->irq, bcm43xx_interrupt_handler,
IRQF_SHARED, KBUILD_MODNAME, bcm);
if (err)
@@ -2645,10 +2573,6 @@ static int bcm43xx_probe_cores(struct bc
chip_id_16 = 0x4610;
else if ((pci_device >= 0x4710) && (pci_device <= 0x4715))
chip_id_16 = 0x4710;
-#ifdef CONFIG_BCM947XX
- else if ((pci_device >= 0x4320) && (pci_device <= 0x4325))
- chip_id_16 = 0x4309;
-#endif
else {
printk(KERN_ERR PFX "Could not determine Chip ID\n");
return -ENODEV;
@@ -4144,11 +4068,6 @@ static int __devinit bcm43xx_init_one(st
struct bcm43xx_private *bcm;
int err;
-#ifdef CONFIG_BCM947XX
- if ((pdev->bus->number == 0) && (pdev->device != 0x0800))
- return -ENODEV;
-#endif
-
#ifdef DEBUG_SINGLE_DEVICE_ONLY
if (strcmp(pci_name(pdev), DEBUG_SINGLE_DEVICE_ONLY))
return -ENODEV;
Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.h
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -33,25 +33,6 @@
#include "bcm43xx.h"
-#ifdef CONFIG_BCM947XX
-#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
-
-static inline void e_aton(char *str, char *dest)
-{
- int i = 0;
- u16 *d = (u16 *) dest;
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
- }
- for (i = 0; i < 3; i++)
- d[i] = cpu_to_be16(d[i]);
-}
-#endif
-
#define P4D_BYT3S(magic, nr_bytes) u8 __p4dding##magic[nr_bytes]
#define P4D_BYTES(line, nr_bytes) P4D_BYT3S(line, nr_bytes)
/* Magic helper macro to pad structures. Ignore those above. It's magic. */
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
