> It looks like you've tried your luck with the unmodified kernel driver, right? Yes, I did not modify to driver, I used the one provided with kernel-2.6.20 > Here is an older driver (updated, compiled & tested with 2.6.21-rc5 (actually, > it's an older wireless-dev git) and a Makefile to build it outside of the kernel tree). > Unfortunatly, It can a while until you get an connection. (So, please wait about 5 mins) I compiled the driver and tested it with kernel-2.6.21.2 and kernel-2.6.21-rc6-g5363171f I've attached the logfile from wpa_supplicant and iwevent, and an iwevent output when using p54 (SOFTMAC driver) as reference, too. The logfiles show only a short time, but I did some further test (one about 10mins) with the same output, too. But I did never get a connection, for this Mail I'm using the p54 one... > untar it, run make and insmod prism54.ko (don't use modprobe, or you may end up > with the wrong kernel module). Also, please check your wpa_supplicant.conf too, > you must enable ONLY TKIP (for group & pairwise) and nothing else! I attached the wpa_supplicant.conf, too. (I think the options "ssid, key_mgmt, proto and psk" must be set, too don't they?) If there are important infos missing or if I could test something new, let me know, I'm still looking forward to get the prism54 one working, too ;-) Regards Stefan - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
