From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx> This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx> Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx> --- drivers/net/Makefile | 2 +- drivers/net/wireless/Kconfig | 120 ++++++++++++++------------------- drivers/net/wireless/bcm43xx/Kconfig | 3 +- drivers/net/wireless/hostap/Kconfig | 3 +- drivers/net/wireless/zd1211rw/Kconfig | 3 +- net/Kconfig | 11 ++- net/Makefile | 2 + net/ieee80211/Kconfig | 3 +- net/wireless/Kconfig | 23 ++++++ net/wireless/Makefile | 1 + 10 files changed, 92 insertions(+), 79 deletions(-) create mode 100644 net/wireless/Kconfig create mode 100644 net/wireless/Makefile diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 33af833..5852732 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -206,7 +206,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ -obj-$(CONFIG_NET_RADIO) += wireless/ +obj-y += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index ece3d9c..880c628 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -2,47 +2,21 @@ # Wireless LAN device configuration # -menu "Wireless LAN (non-hamradio)" - depends on NETDEVICES - -config NET_RADIO - bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" - select WIRELESS_EXT - ---help--- - Support for wireless LANs and everything having to do with radio, - but not with amateur radio or FM broadcasting. - - Saying Y here also enables the Wireless Extensions (creates - /proc/net/wireless and enables iwconfig access). The Wireless - Extension is a generic API allowing a driver to expose to the user - space configuration and statistics specific to common Wireless LANs. - The beauty of it is that a single set of tool can support all the - variations of Wireless LANs, regardless of their type (as long as - the driver supports Wireless Extension). Another advantage is that - these parameters may be changed on the fly without restarting the - driver (or Linux). If you wish to use Wireless Extensions with - wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch - the tools from - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. +menu "Wireless LAN" -config NET_WIRELESS_RTNETLINK - bool "Wireless Extension API over RtNetlink" - depends on NET_RADIO +config WLAN_PRE80211 + bool "Wireless LAN (pre-802.11)" + depends on NETDEVICES ---help--- - Support the Wireless Extension API over the RtNetlink socket - in addition to the traditional ioctl interface (selected above). + Say Y if you have any pre-802.11 wireless LAN hardware. - For now, few tools use this facility, but it might grow in the - future. The only downside is that it adds 4.5 kB to your kernel. - -# Note : the cards are obsolete (can't buy them anymore), but the drivers -# are not, as people are still using them... -comment "Obsolete Wireless cards support (pre-802.11)" - depends on NET_RADIO && (INET || ISA || PCMCIA) + This option does not affect the kernel build, it only + let's you choose drivers. config STRIP tristate "STRIP (Metricom starmode radio IP)" - depends on NET_RADIO && INET + depends on INET && WLAN_PRE80211 + select WIRELESS_EXT ---help--- Say Y if you have a Metricom radio and intend to use Starmode Radio IP. STRIP is a radio protocol developed for the MosquitoNet project @@ -65,7 +39,8 @@ config STRIP config ARLAN tristate "Aironet Arlan 655 & IC2200 DS support" - depends on NET_RADIO && ISA && !64BIT + depends on ISA && !64BIT && WLAN_PRE80211 + select WIRELESS_EXT ---help--- Aironet makes Arlan, a class of wireless LAN adapters. These use the www.Telxon.com chip, which is also used on several similar cards. @@ -80,7 +55,8 @@ config ARLAN config WAVELAN tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" - depends on NET_RADIO && ISA + depends on ISA && WLAN_PRE80211 + select WIRELESS_EXT ---help--- The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is a Radio LAN (wireless Ethernet-like Local Area Network) using the @@ -107,7 +83,8 @@ config WAVELAN config PCMCIA_WAVELAN tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" - depends on NET_RADIO && PCMCIA + depends on PCMCIA && WLAN_PRE80211 + select WIRELESS_EXT help Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA (PC-card) wireless Ethernet networking card to your computer. This @@ -118,7 +95,8 @@ config PCMCIA_WAVELAN config PCMCIA_NETWAVE tristate "Xircom Netwave AirSurfer Pcmcia wireless support" - depends on NET_RADIO && PCMCIA + depends on PCMCIA && WLAN_PRE80211 + select WIRELESS_EXT help Say Y here if you intend to attach this type of PCMCIA (PC-card) wireless Ethernet networking card to your computer. @@ -126,12 +104,20 @@ config PCMCIA_NETWAVE To compile this driver as a module, choose M here: the module will be called netwave_cs. If unsure, say N. -comment "Wireless 802.11 Frequency Hopping cards support" - depends on NET_RADIO && PCMCIA + +config WLAN_80211 + bool "Wireless LAN (IEEE 802.11)" + depends on NETDEVICES + ---help--- + Say Y if you have any 802.11 wireless LAN hardware. + + This option does not affect the kernel build, it only + let's you choose drivers. config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4MHz wireless support" - depends on NET_RADIO && PCMCIA + depends on PCMCIA && WLAN_80211 + select WIRELESS_EXT ---help--- Say Y here if you intend to attach an Aviator/Raytheon PCMCIA (PC-card) wireless Ethernet networking card to your computer. @@ -141,12 +127,10 @@ config PCMCIA_RAYCS To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. -comment "Wireless 802.11b ISA/PCI cards support" - depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) - config IPW2100 tristate "Intel PRO/Wireless 2100 Network Connection" - depends on NET_RADIO && PCI + depends on PCI && WLAN_80211 + select WIRELESS_EXT select FW_LOADER select IEEE80211 ---help--- @@ -200,7 +184,8 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on NET_RADIO && PCI + depends on PCI && WLAN_80211 + select WIRELESS_EXT select FW_LOADER select IEEE80211 ---help--- @@ -282,7 +267,8 @@ config IPW2200_DEBUG config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN) + depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) + select WIRELESS_EXT select CRYPTO ---help--- This is the standard Linux driver to support Cisco/Aironet ISA and @@ -299,7 +285,8 @@ config AIRO config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) + depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 + select WIRELESS_EXT ---help--- A driver for 802.11b wireless cards based on the "Hermes" or Intersil HFA384x (Prism 2) MAC controller. This includes the vast @@ -373,7 +360,8 @@ config PCI_HERMES config ATMEL tristate "Atmel at76c50x chipset 802.11b support" - depends on NET_RADIO && (PCI || PCMCIA) + depends on (PCI || PCMCIA) && WLAN_80211 + select WIRELESS_EXT select FW_LOADER select CRC32 ---help--- @@ -394,13 +382,9 @@ config PCI_ATMEL Enable support for PCI and mini-PCI cards containing the Atmel at76c506 chip. -# If Pcmcia is compiled in, offer Pcmcia cards... -comment "Wireless 802.11b Pcmcia/Cardbus cards support" - depends on NET_RADIO && PCMCIA - config PCMCIA_HERMES tristate "Hermes PCMCIA card support" - depends on NET_RADIO && PCMCIA && HERMES + depends on PCMCIA && HERMES ---help--- A driver for "Hermes" chipset based PCMCIA wireless adaptors, such as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ @@ -420,7 +404,7 @@ config PCMCIA_HERMES config PCMCIA_SPECTRUM tristate "Symbol Spectrum24 Trilogy PCMCIA card support" - depends on NET_RADIO && PCMCIA && HERMES + depends on PCMCIA && HERMES select FW_LOADER ---help--- @@ -434,7 +418,8 @@ config PCMCIA_SPECTRUM config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) + depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 + select WIRELESS_EXT select CRYPTO select CRYPTO_AES ---help--- @@ -458,7 +443,8 @@ config AIRO_CS config PCMCIA_ATMEL tristate "Atmel at76c502/at76c504 PCMCIA cards" - depends on NET_RADIO && ATMEL && PCMCIA + depends on ATMEL && PCMCIA + select WIRELESS_EXT select FW_LOADER select CRC32 ---help--- @@ -467,17 +453,17 @@ config PCMCIA_ATMEL config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" - depends on NET_RADIO && EXPERIMENTAL && PCMCIA + depends on EXPERIMENTAL && PCMCIA && WLAN_80211 + select WIRELESS_EXT ---help--- A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. It has basic support for Linux wireless extensions and initial micro support for ethtool. -comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" - depends on NET_RADIO && PCI config PRISM54 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' - depends on PCI && NET_RADIO && EXPERIMENTAL + depends on PCI && EXPERIMENTAL && WLAN_80211 + select WIRELESS_EXT select FW_LOADER ---help--- Enable PCI and Cardbus support for the following chipset based cards: @@ -523,7 +509,8 @@ config PRISM54 config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" - depends on USB && NET_RADIO + depends on USB && WLAN_80211 + select WIRELESS_EXT select FW_LOADER ---help--- Say Y if you want to use wireless LAN adapters based on the ZyDAS @@ -542,11 +529,4 @@ source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" -# yes, this works even when no drivers are selected -config NET_WIRELESS - bool - depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) - default y - endmenu - diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig index 533993f..ce397e4 100644 --- a/drivers/net/wireless/bcm43xx/Kconfig +++ b/drivers/net/wireless/bcm43xx/Kconfig @@ -1,6 +1,7 @@ config BCM43XX tristate "Broadcom BCM43xx wireless support" - depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && NET_RADIO && EXPERIMENTAL + depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL + select WIRELESS_EXT select FW_LOADER select HW_RANDOM ---help--- diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig index 308f773..1fef331 100644 --- a/drivers/net/wireless/hostap/Kconfig +++ b/drivers/net/wireless/hostap/Kconfig @@ -1,6 +1,7 @@ config HOSTAP tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" - depends on NET_RADIO + depends on WLAN_80211 + select WIRELESS_EXT select IEEE80211 select IEEE80211_CRYPT_WEP ---help--- diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig index 66ed55b..d1ab24a 100644 --- a/drivers/net/wireless/zd1211rw/Kconfig +++ b/drivers/net/wireless/zd1211rw/Kconfig @@ -1,6 +1,7 @@ config ZD1211RW tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" - depends on USB && IEEE80211 && IEEE80211_SOFTMAC && NET_RADIO && EXPERIMENTAL + depends on USB && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL + select WIRELESS_EXT select FW_LOADER ---help--- This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless diff --git a/net/Kconfig b/net/Kconfig index e2d9b3b..ae1817d 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -212,14 +212,17 @@ endmenu source "net/ax25/Kconfig" source "net/irda/Kconfig" source "net/bluetooth/Kconfig" -source "net/ieee80211/Kconfig" - -config WIRELESS_EXT - bool config FIB_RULES bool +menu "Wireless" + +source "net/wireless/Kconfig" +source "net/ieee80211/Kconfig" + +endmenu + endif # if NET endmenu # Networking diff --git a/net/Makefile b/net/Makefile index 4854ac5..29bbe19 100644 --- a/net/Makefile +++ b/net/Makefile @@ -52,3 +52,5 @@ obj-$(CONFIG_IUCV) += iucv/ ifeq ($(CONFIG_NET),y) obj-$(CONFIG_SYSCTL) += sysctl_net.o endif + +obj-y += wireless/ diff --git a/net/ieee80211/Kconfig b/net/ieee80211/Kconfig index 6ef766e..1438ade 100644 --- a/net/ieee80211/Kconfig +++ b/net/ieee80211/Kconfig @@ -56,7 +56,8 @@ config IEEE80211_CRYPT_CCMP config IEEE80211_CRYPT_TKIP tristate "IEEE 802.11i TKIP encryption" - depends on IEEE80211 && NET_RADIO + depends on IEEE80211 + select WIRELESS_EXT select CRYPTO select CRYPTO_MICHAEL_MIC select CRYPTO_ECB diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig new file mode 100644 index 0000000..ca2f05c --- /dev/null +++ b/net/wireless/Kconfig @@ -0,0 +1,23 @@ +config WIRELESS_EXT + bool "Wireless extensions" + default n + ---help--- + This option enables the legacy wireless extensions + (wireless network interface configuration via ioctls.) + + Wireless extensions will be replaced by cfg80211 and + will be required only by legacy drivers that implement + wireless extension handlers. + + Say N (if you can) unless you know you need wireless + extensions for external modules. + +config NET_WIRELESS_RTNETLINK + bool "Wireless Extension API over RtNetlink" + depends on WIRELESS_EXT + ---help--- + Support the Wireless Extension API over the RtNetlink socket + in addition to the traditional ioctl interface (selected above). + + For now, few tools use this facility, but it might grow in the + future. The only downside is that it adds 4.5 kB to your kernel. diff --git a/net/wireless/Makefile b/net/wireless/Makefile new file mode 100644 index 0000000..cf4e3d9 --- /dev/null +++ b/net/wireless/Makefile @@ -0,0 +1 @@ +# dummy file for now -- 1.5.0.6 -- John W. Linville linville@xxxxxxxxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
