Fix coding style.
Signed-off-by: Stefano Brivio <stefano.brivio@xxxxxxxxx>
---
Index: wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187.h
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/rtl818x/rtl8187.h
+++ wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187.h
@@ -68,7 +68,7 @@ static inline u8 rtl818x_ioread8(struct
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, 0, &val, sizeof(val), HZ/2);
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return val;
}
@@ -79,7 +79,7 @@ static inline u8 rtl818x_ioread16(struct
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, 0, &val, sizeof(val), HZ/2);
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return le16_to_cpu(val);
}
@@ -90,7 +90,7 @@ static inline u8 rtl818x_ioread32(struct
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, 0, &val, sizeof(val), HZ/2);
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
return le32_to_cpu(val);
}
@@ -100,7 +100,7 @@ static inline void rtl818x_iowrite8(stru
{
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, 0, &val, sizeof(val), HZ/2);
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
}
static inline void rtl818x_iowrite16(struct rtl8187_priv *priv,
@@ -110,7 +110,7 @@ static inline void rtl818x_iowrite16(str
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, 0, &buf, sizeof(buf), HZ/2);
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
}
static inline void rtl818x_iowrite32(struct rtl8187_priv *priv,
@@ -120,7 +120,7 @@ static inline void rtl818x_iowrite32(str
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, 0, &buf, sizeof(buf), HZ/2);
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
}
#endif /* RTL8187_H */
Index: wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187_dev.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/rtl818x/rtl8187_dev.c
+++ wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187_dev.c
@@ -58,9 +58,9 @@ void rtl8187_write_phy(struct ieee80211_
static void rtl8187_tx_cb(struct urb *urb)
{
- struct ieee80211_tx_status status = {{0}};
+ struct ieee80211_tx_status status = { {0} };
struct sk_buff *skb = (struct sk_buff *)urb->context;
- struct rtl8187_tx_info *info = (struct rtl8187_tx_info *) skb->cb;
+ struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
usb_free_urb(info->urb);
if (info->control)
@@ -88,30 +88,30 @@ static int rtl8187_tx(struct ieee80211_h
}
if (ieee80211_get_hdrlen_from_skb(skb) >= 24) {
- ieeehdr = (struct ieee80211_hdr *) skb->data;
+ ieeehdr = (struct ieee80211_hdr *)skb->data;
ieeehdr->seq_ctrl = cpu_to_le16(priv->seq_counter);
priv->seq_counter += 0x10;
priv->seq_counter &= IEEE80211_SCTL_SEQ;
}
- hdr = (struct rtl8187_tx_hdr *) skb_push(skb, sizeof(*hdr));
+ hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
tmp = skb->len - sizeof(*hdr);
tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
tmp |= control->rts_cts_rate << 19;
tmp |= control->tx_rate << 24;
- if(ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
+ if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
tmp |= RTL8187_TX_FLAG_MORE_FRAG;
- if(control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
+ if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
tmp |= RTL8187_TX_FLAG_RTS;
- if(control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+ if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
tmp |= RTL8187_TX_FLAG_CTS;
hdr->flags = cpu_to_le32(tmp);
- hdr->rts_duration = 0; /* TODO : follow RTL sample */
+ hdr->rts_duration = 0; /* TODO: follow RTL sample */
hdr->len = 0;
tmp = control->retry_limit << 8;
hdr->retry = cpu_to_le32(tmp);
- info = (struct rtl8187_tx_info *) skb->cb;
+ info = (struct rtl8187_tx_info *)skb->cb;
info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
info->urb = urb;
info->dev = dev;
@@ -122,15 +122,14 @@ static int rtl8187_tx(struct ieee80211_h
return 0;
}
-
static void rtl8187_rx_cb(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
struct ieee80211_hw *dev = info->dev;
struct rtl8187_priv *priv = dev->priv;
struct rtl8187_rx_hdr *hdr;
- struct ieee80211_rx_status rx_status = {0};
+ struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
if (unlikely(urb->status)) {
@@ -141,18 +140,18 @@ static void rtl8187_rx_cb(struct urb *ur
skb_unlink(skb, &priv->rx_queue);
skb_put(skb, urb->actual_length);
- hdr = (struct rtl8187_rx_hdr *) (skb->tail - sizeof(*hdr));
+ hdr = (struct rtl8187_rx_hdr *)(skb->tail - sizeof(*hdr));
skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
signal = hdr->agc >> 1;
rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
- if (rate > 3) { // OFDM rate.
+ if (rate > 3) { /* OFDM rate */
if (signal > 90)
signal = 90;
else if (signal < 25)
signal = 25;
signal = 90 - signal;
- } else { // CCK rate.
+ } else { /* CCK rate */
if (signal > 95)
signal = 95;
else if (signal < 30)
@@ -177,7 +176,7 @@ static void rtl8187_rx_cb(struct urb *ur
return;
}
- info = (struct rtl8187_rx_info *) skb->cb;
+ info = (struct rtl8187_rx_info *)skb->cb;
info->urb = urb;
info->dev = dev;
urb->transfer_buffer = skb->tail;
@@ -206,7 +205,7 @@ static int rtl8187_init_urbs(struct ieee
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 1), skb->tail,
RTL8187_MAX_RX, rtl8187_rx_cb, skb);
- info = (struct rtl8187_rx_info *) skb->cb;
+ info = (struct rtl8187_rx_info *)skb->cb;
info->urb = entry;
info->dev = dev;
skb_queue_tail(&priv->rx_queue, skb);
@@ -246,9 +245,9 @@ static int rtl8187_init_hw(struct ieee80
mdelay(200);
- // check success of reset
+ /* check success of reset */
if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
- printk(KERN_ERR "rtl8187: reset timeout!\n");
+ printk(KERN_ERR "rtl8187: Reset timeout!\n");
return -ETIMEDOUT;
}
@@ -291,7 +290,7 @@ static int rtl8187_init_hw(struct ieee80
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
- // ehh?
+ // XXX: ehh?
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
@@ -300,7 +299,7 @@ static int rtl8187_init_hw(struct ieee80
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
- // host_usb_init
+ /* host_usb_init */
rtl818x_iowrite8(priv, (u8 *)0xFF85, 0);
rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
@@ -367,18 +366,18 @@ static int rtl8187_open(struct ieee80211
rtl8187_init_urbs(dev);
- reg = RTL818X_RX_CONF_ONLYERLPKT |
- RTL818X_RX_CONF_RX_AUTORESETPHY |
- RTL818X_RX_CONF_BSSID |
- RTL818X_RX_CONF_MGMT |
- RTL818X_RX_CONF_CTRL |
- RTL818X_RX_CONF_DATA |
- (7 << 13 /* RX FIFO threshold NONE */) |
- (7 << 10 /* MAX RX DMA */) |
- RTL818X_RX_CONF_BROADCAST |
- RTL818X_RX_CONF_MULTICAST |
- RTL818X_RX_CONF_NICMAC;
- if(priv->mode == IEEE80211_IF_TYPE_MNTR)
+ reg = RTL818X_RX_CONF_ONLYERLPKT |
+ RTL818X_RX_CONF_RX_AUTORESETPHY |
+ RTL818X_RX_CONF_BSSID |
+ RTL818X_RX_CONF_MGMT |
+ RTL818X_RX_CONF_CTRL |
+ RTL818X_RX_CONF_DATA |
+ (7 << 13 /* RX FIFO threshold NONE */) |
+ (7 << 10 /* MAX RX DMA */) |
+ RTL818X_RX_CONF_BROADCAST |
+ RTL818X_RX_CONF_MULTICAST |
+ RTL818X_RX_CONF_NICMAC;
+ if (priv->mode == IEEE80211_IF_TYPE_MNTR)
reg |= RTL818X_RX_CONF_MONITOR;
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
@@ -429,7 +428,7 @@ static int rtl8187_stop(struct ieee80211
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
while ((skb = skb_dequeue(&priv->rx_queue))) {
- info = (struct rtl8187_rx_info *) skb->cb;
+ info = (struct rtl8187_rx_info *)skb->cb;
if (!info->urb)
continue;
@@ -590,7 +589,7 @@ static int __devinit rtl8187_probe(struc
skb_queue_head_init(&priv->rx_queue);
memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
- priv->map = (struct rtl818x_csr __iomem *) 0xFF00;
+ priv->map = (struct rtl818x_csr __iomem *)0xFF00;
priv->modes[0].mode = MODE_IEEE80211G;
priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
priv->modes[0].rates = priv->rates;
@@ -628,7 +627,7 @@ static int __devinit rtl8187_probe(struc
eeprom_93cx6_multiread(&eeprom, 0x7, dev->wiphy->perm_addr, 3);
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
- printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly generated MAC addr\n");
+ printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly generated MAC address\n");
random_ether_addr(dev->wiphy->perm_addr);
}
@@ -662,8 +661,7 @@ static int __devinit rtl8187_probe(struc
rtl8225_write(dev, 0, 0x1B7);
- if (rtl8225_read(dev, 8) != 0x588 ||
- rtl8225_read(dev, 9) != 0x700)
+ if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
priv->rf_init = rtl8225_rf_init;
else
priv->rf_init = rtl8225z2_rf_init;
Index: wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187_rtl8225.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/rtl818x/rtl8187_rtl8225.c
+++ wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl8187_rtl8225.c
@@ -45,7 +45,7 @@ void rtl8225_write_bitbang(struct ieee80
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
- for(i = 15; i >= 0; i--){
+ for (i = 15; i >= 0; i--) {
u16 reg = reg80 | (bangdata & (1 << i)) >> i;
if (i & 1)
@@ -104,7 +104,7 @@ void rtl8225_write(struct ieee80211_hw *
{
struct rtl8187_priv *priv = dev->priv;
- if(priv->asic_rev)
+ if (priv->asic_rev)
rtl8225_write_8051(dev, addr, data);
else
rtl8225_write_bitbang(dev, addr, data);
@@ -230,13 +230,13 @@ static const u8 rtl8225_agc[] = {
};
static const u8 rtl8225_gain[] = {
- 0x23, 0x88, 0x7c, 0xa5,// -82dbm
- 0x23, 0x88, 0x7c, 0xb5,// -82dbm
- 0x23, 0x88, 0x7c, 0xc5,// -82dbm
- 0x33, 0x80, 0x79, 0xc5,// -78dbm
- 0x43, 0x78, 0x76, 0xc5,// -74dbm
- 0x53, 0x60, 0x73, 0xc5,// -70dbm
- 0x63, 0x58, 0x70, 0xc5,// -66dbm
+ 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */
+ 0x33, 0x80, 0x79, 0xc5, /* -78dBm */
+ 0x43, 0x78, 0x76, 0xc5, /* -74dBm */
+ 0x53, 0x60, 0x73, 0xc5, /* -70dBm */
+ 0x63, 0x58, 0x70, 0xc5, /* -66dBm */
};
static const u8 rtl8225_threshold[] = {
@@ -301,7 +301,7 @@ static void rtl8225_rf_set_tx_power(stru
mdelay(1); // FIXME: optional?
- // anaparam2 on
+ /* anaparam2 on */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
@@ -314,7 +314,7 @@ static void rtl8225_rf_set_tx_power(stru
rtl8225_write_phy_ofdm(dev, 8, 0x00);
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
- rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1);
+ rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
@@ -349,14 +349,14 @@ void rtl8225_rf_init(struct ieee80211_hw
rtl8225_write(dev, 0x2, 0xC4D); mdelay(200);
rtl8225_write(dev, 0x2, 0x44D); mdelay(200);
- if (!(rtl8225_read(dev, 6) & (1 << 7))){
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
rtl8225_write(dev, 0x02, 0x0c4d);
mdelay(200);
rtl8225_write(dev, 0x02, 0x044d);
mdelay(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
- printk("RF Calibration Failed!!!! %x\n",
- rtl8225_read(dev, 6));
+ printk("rtl8187: RF Calibration Failed! %x\n",
+ rtl8225_read(dev, 6));
}
rtl8225_write(dev, 0x0, 0x127);
@@ -453,15 +453,15 @@ void rtl8225_rf_init(struct ieee80211_hw
rtl8225_rf_set_tx_power(dev, 1);
- // RX antenna default to A
- rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); // B: 0xDB
- rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); // B: 0x10
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
- rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); // B: 0x00
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
mdelay(1);
rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
- // set sensitivity
+ /* set sensitivity */
rtl8225_write(dev, 0x0c, 0x50);
rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
@@ -470,7 +470,6 @@ void rtl8225_rf_init(struct ieee80211_hw
rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
}
-
static const u8 rtl8225z2_tx_power_cck_ch14[] = {
0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
};
@@ -523,7 +522,7 @@ static void rtl8225z2_rf_set_tx_power(st
rtl8225z2_tx_gain_cck_ofdm[cck_power]);
mdelay(1);
- // anaparam2 on
+ /* anaparam2 on */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
@@ -558,13 +557,13 @@ static const u16 rtl8225z2_rxgain[] = {
};
static const u8 rtl8225z2_gain_bg[] = {
- 0x23, 0x15, 0xa5, // -82-1dBm
- 0x23, 0x15, 0xb5, // -82-2dBm
- 0x23, 0x15, 0xc5, // -82-3dBm
- 0x33, 0x15, 0xc5, // -78dBm
- 0x43, 0x15, 0xc5, // -74dBm
- 0x53, 0x15, 0xc5, // -70dBm
- 0x63, 0x15, 0xc5 // -66dBm
+ 0x23, 0x15, 0xa5, /* -82-1dBm */
+ 0x23, 0x15, 0xb5, /* -82-2dBm */
+ 0x23, 0x15, 0xc5, /* -82-3dBm */
+ 0x33, 0x15, 0xc5, /* -78dBm */
+ 0x43, 0x15, 0xc5, /* -74dBm */
+ 0x53, 0x15, 0xc5, /* -70dBm */
+ 0x63, 0x15, 0xc5 /* -66dBm */
};
void rtl8225z2_rf_init(struct ieee80211_hw *dev)
@@ -611,8 +610,8 @@ void rtl8225z2_rf_init(struct ieee80211_
rtl8225_write(dev, 0x02, 0x044D);
mdelay(100);
if (!(rtl8225_read(dev, 6) & (1 << 7)))
- printk("RF Calibration Failed!!!! %x\n",
- rtl8225_read(dev, 6));
+ printk("rtl8187: RF Calibration Failed! %x\n",
+ rtl8225_read(dev, 6));
}
mdelay(200);
@@ -706,11 +705,11 @@ void rtl8225z2_rf_init(struct ieee80211_
rtl8225z2_rf_set_tx_power(dev, 1);
- // RX antenna default to A
- rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); // B: 0xDB
- rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); // B: 0x10
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); mdelay(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); mdelay(1); /* B: 0x10 */
- rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); // B: 0x00
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
mdelay(1);
rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
}
@@ -743,5 +742,3 @@ void rtl8225_rf_set_channel(struct ieee8
rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
mdelay(10);
}
-
-
Index: wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl818x.h
===================================================================
--- wireless-dev.orig/drivers/net/wireless/mac80211/rtl818x/rtl818x.h
+++ wireless-dev/drivers/net/wireless/mac80211/rtl818x/rtl818x.h
@@ -105,7 +105,7 @@ struct rtl818x_csr {
u8 reserved_17[32];
u16 TALLY_CNT;
u8 TALLY_SEL;
-} __attribute__ ((packed));
+} __attribute__((packed));
static const struct ieee80211_rate rtl818x_rates[] = {
{ .rate = 10,
--
Ciao
Stefano
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
