You may want to try at linux-wireless@xxxxxxxxxxxxxxx instead... On Mon, Apr 16, 2007 at 10:41:21AM +0200, Stefan Puch wrote: > Hi everyone, > > I found on this mailinglist the thread from chunkeey who added WPA support for > prism54 fullmac cards > > http://www.spinics.net/lists/netdev/msg16224.html > > The last days I tried to get this driver working, but I was not able to. After > "googling" and reading the mails I found that Jim Faulkner have had similar > problems, see posting on this mailing list here: > > http://www.spinics.net/lists/linux-net/msg14821.html > > So I tried to make hopefully "useful" debug traces, perhaps anyone can tell me > why it doesn't work? > > The Hardware: > Access point: AVM Fritz!Box Fon WLAN 7170 (last stable Firmware) > Laptop: Fujitsu Siemens Lifebook C > WLAN-Adapter: Netgear WG511 (Fullmac) > > > The Software: > - Vanilla Kernel 2.6.20.6 (WE-21) > - Wireless Tools version 29-pre17 (The main features is WE-21 support) > - firmware Version 1.0.4.3 (from www.prism54.org) > - wpa_supplicant Version 0.5.5 > - as reference ndiswrapper version 1.41 > > First of all I tried the good old WEP encryption with the prism54 driver: No > problem, it works fine with the firmware 1.0.4.3!!! > > Next step was to try get a WPA connection to the access point. I can load the > kernel module, the firmware is loaded correctly, too. > Only the connection with wpa_supplicant doesn't establish (debug trace attached > this email), here's my wpa_supplicant.conf: > > ctrl_interface=/var/run/wpa_supplicant > network={ > ssid="puch.home" > scan_ssid=1 > proto=WPA > key_mgmt=WPA-PSK > psk="ThisIsATestWPA-Key" > } > > As reference I tried to connect to the access point using ndiswrapper and > wpa_supplicant (same wpa_supplicant.conf). There the connection is established. > I attached the debug trace, too so everyone can see where the differences are) > > Please let me know, if there are important infos missing and CC me in any > responses, because I'm not subscribed to this mailing list. > > Thanks in advance for any comment or help, > > Stefan Puch > > --------------------------------------------------------------------------------- > debug traces: > --------------------------------------------------------------------------------- > > Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' > Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' > Reading configuration file '/etc/wpa_supplicant.conf' > ctrl_interface='/var/run/wpa_supplicant' > Line: 4 - start of a new network block > ssid - hexdump_ascii(len=9): > 70 75 63 68 2e 68 6f 6d 65 puch.home > scan_ssid=1 (0x1) > PSK (ASCII passphrase) - hexdump_ascii(len=18): > 54 68 69 73 49 73 41 54 65 73 74 57 50 41 2d 4b ThisIsATestWPA-K > 65 79 ey > key_mgmt: 0x2 > proto: 0x1 > PSK (from passphrase) - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > Priority group 0 > id=0 ssid='puch.home' > Initializing interface (2) 'eth1' > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > EAPOL: SUPP_BE entering state INITIALIZE > EAP: EAP entering state DISABLED > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > SIOCGIWRANGE: WE(compiled)=21 WE(source)=19 enc_capa=0x7 > capabilities: key_mgmt 0xf enc 0x7 > WEXT: Operstate: linkmode=1, operstate=5 > Own MAC address: 00:09:5b:c9:5b:52 > wpa_driver_wext_set_wpa > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_countermeasures > wpa_driver_wext_set_drop_unencrypted > Setting scan request: 0 sec 100000 usec > Added interface eth1 > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > Wireless event: cmd=0x8b06 len=8 > RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=70 > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > State: DISCONNECTED -> SCANNING > Starting AP scan (specific SSID) > Scan SSID - hexdump_ascii(len=9): > 70 75 63 68 2e 68 6f 6d 65 puch.home > Trying to get current scan results first without requesting a new scan to speed up initial association > Received 207 bytes of scan results (1 BSSes) > Scan results: 1 > Selecting BSS from priority group 0 > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > selected based on WPA IE > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > Cancelling scan request > WPA: clearing own WPA/RSN IE > Automatic auth_alg selection: 0x1 > WPA: using IEEE 802.11i/D3.0 > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > WPA: clearing AP RSN IE > WPA: using GTK TKIP > WPA: using PTK TKIP > WPA: using KEY_MGMT WPA-PSK > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > No keys have been configured - skip key clearing > wpa_driver_wext_set_drop_unencrypted > State: SCANNING -> ASSOCIATING > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > wpa_driver_wext_associate > Setting authentication timeout: 10 sec 0 usec > EAPOL: External notification - EAP success=0 > EAPOL: External notification - EAP fail=0 > EAPOL: External notification - portControl=Auto > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b06 len=8 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b04 len=12 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b1a len=17 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=70 > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:C0:49:E1:3B:61 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=63 > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=70 > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=63 > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=63 > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > Authentication with 00:00:00:00:00:00 timed out. > Added BSSID 00:15:0c:d6:c7:74 into blacklist > State: ASSOCIATING -> DISCONNECTED > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > No keys have been configured - skip key clearing > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > Setting scan request: 0 sec 0 usec > State: DISCONNECTED -> SCANNING > Starting AP scan (broadcast SSID) > Scan timeout - try to get results > Received 383 bytes of scan results (2 BSSes) > Scan results: 2 > Selecting BSS from priority group 0 > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > selected based on WPA IE > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > Cancelling scan request > WPA: clearing own WPA/RSN IE > Automatic auth_alg selection: 0x1 > WPA: using IEEE 802.11i/D3.0 > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > WPA: clearing AP RSN IE > WPA: using GTK TKIP > WPA: using PTK TKIP > WPA: using KEY_MGMT WPA-PSK > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > No keys have been configured - skip key clearing > wpa_driver_wext_set_drop_unencrypted > State: SCANNING -> ASSOCIATING > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > wpa_driver_wext_associate > Setting authentication timeout: 10 sec 0 usec > EAPOL: External notification - EAP success=0 > EAPOL: External notification - EAP fail=0 > EAPOL: External notification - portControl=Auto > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b06 len=8 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b04 len=12 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b1a len=17 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=63 > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=70 > WEXT: Custom wireless event: 'Received a beacon from an unkown AP to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=63 > WEXT: Custom wireless event: 'Received a probe from client to 00:15:0C:D6:C7:74 (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c02 len=72 > WEXT: Custom wireless event: 'Authenticate request (ex) to 00:15:0C:D6:C7:74 : ACCEPTED (00)' > CTRL-EVENT-TERMINATING - signal 2 received > Removing interface eth1 > State: ASSOCIATING -> DISCONNECTED > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > No keys have been configured - skip key clearing > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > wpa_driver_wext_set_wpa > wpa_driver_wext_set_drop_unencrypted > wpa_driver_wext_set_countermeasures > No keys have been configured - skip key clearing > WEXT: Operstate: linkmode=0, operstate=6 > Removed BSSID 00:15:0c:d6:c7:74 from blacklist (clear) > Cancelling scan request > > Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' > Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' > Reading configuration file '/etc/wpa_supplicant.conf' > ctrl_interface='/var/run/wpa_supplicant' > Line: 4 - start of a new network block > ssid - hexdump_ascii(len=9): > 70 75 63 68 2e 68 6f 6d 65 puch.home > scan_ssid=1 (0x1) > PSK (ASCII passphrase) - hexdump_ascii(len=18): > 54 68 69 73 49 73 41 54 65 73 74 57 50 41 2d 4b ThisIsATestWPA-K > 65 79 ey > key_mgmt: 0x2 > proto: 0x1 > PSK (from passphrase) - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > Priority group 0 > id=0 ssid='puch.home' > Initializing interface (2) 'wlan0' > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > EAPOL: SUPP_BE entering state INITIALIZE > EAP: EAP entering state DISABLED > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > SIOCGIWRANGE: WE(compiled)=21 WE(source)=18 enc_capa=0xf > capabilities: key_mgmt 0xf enc 0xf > WEXT: Operstate: linkmode=1, operstate=5 > Own MAC address: 00:09:5b:c9:5b:52 > wpa_driver_wext_set_wpa > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_countermeasures > wpa_driver_wext_set_drop_unencrypted > Setting scan request: 0 sec 100000 usec > Added interface wlan0 > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > Wireless event: cmd=0x8b06 len=8 > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > State: DISCONNECTED -> SCANNING > Starting AP scan (specific SSID) > Scan SSID - hexdump_ascii(len=9): > 70 75 63 68 2e 68 6f 6d 65 puch.home > Trying to get current scan results first without requesting a new scan to speed up initial association > Received 489 bytes of scan results (2 BSSes) > Scan results: 2 > Selecting BSS from priority group 0 > 0: 00:15:0c:d6:c7:74 ssid='puch.home' wpa_ie_len=26 rsn_ie_len=0 caps=0x11 > selected based on WPA IE > Trying to associate with 00:15:0c:d6:c7:74 (SSID='puch.home' freq=2412 MHz) > Cancelling scan request > WPA: clearing own WPA/RSN IE > Automatic auth_alg selection: 0x1 > WPA: using IEEE 802.11i/D3.0 > WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 > WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > WPA: clearing AP RSN IE > WPA: using GTK TKIP > WPA: using PTK TKIP > WPA: using KEY_MGMT WPA-PSK > WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > No keys have been configured - skip key clearing > wpa_driver_wext_set_drop_unencrypted > State: SCANNING -> ASSOCIATING > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > wpa_driver_wext_associate > Setting authentication timeout: 10 sec 0 usec > EAPOL: External notification - EAP success=0 > EAPOL: External notification - EAP fail=0 > EAPOL: External notification - portControl=Auto > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > Wireless event: cmd=0x8b06 len=8 > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > Wireless event: cmd=0x8b04 len=12 > RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) > Wireless event: cmd=0x8b1a len=17 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c07 len=59 > AssocReq IE wireless event - hexdump(len=51): 00 09 70 75 63 68 2e 68 6f 6d 65 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8c08 len=24 > AssocResp IE wireless event - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c > RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) > Wireless event: cmd=0x8b15 len=20 > Wireless event: new AP: 00:15:0c:d6:c7:74 > Association info event > req_ies - hexdump(len=51): 00 09 70 75 63 68 2e 68 6f 6d 65 01 04 02 04 0b 16 32 08 0c 12 18 24 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > resp_ies - hexdump(len=16): 01 04 82 84 8b 96 32 08 0c 12 18 24 30 48 60 6c > WPA: set own WPA/RSN IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > State: ASSOCIATING -> ASSOCIATED > wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > Associated to a new BSS: BSSID=00:15:0c:d6:c7:74 > No keys have been configured - skip key clearing > Associated with 00:15:0c:d6:c7:74 > WPA: Association event - clear replay counter > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > EAPOL: External notification - EAP success=0 > EAPOL: External notification - portEnabled=1 > EAPOL: SUPP_PAE entering state CONNECTING > EAPOL: SUPP_BE entering state IDLE > Setting authentication timeout: 10 sec 0 usec > Cancelling scan request > RX EAPOL from 00:15:0c:d6:c7:74 > RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Setting authentication timeout: 10 sec 0 usec > IEEE 802.1X RX: version=1 type=3 length=95 > EAPOL-Key type=254 > key_info 0x89 (ver=1 keyidx=0 rsvd=0 Pairwise Ack) > key_length=32 key_data_length=0 > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01 > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 > key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > State: ASSOCIATED -> 4WAY_HANDSHAKE > WPA: RX message 1 of 4-Way Handshake from 00:15:0c:d6:c7:74 (ver=1) > WPA: Renewed SNonce - hexdump(len=32): 2e e3 7a cc cd 1e 3f e1 17 76 10 f1 8b 6e dc 53 5f c0 31 b9 71 40 e2 7b a3 04 75 0c 66 9d 95 01 > WPA: PMK - hexdump(len=32): 44 49 84 4d 00 d4 0c 0a 3a bd 2e 33 89 3b d2 39 bc e2 5c 9c 81 38 43 64 6c 9b c0 4b 00 34 5c e5 > WPA: PTK - hexdump(len=64): 7c d3 49 82 93 2d fc 6f 23 41 7c 1b 33 cf 5d be c1 2f a2 39 d5 76 c1 20 e9 b3 b1 18 3e 9e 45 74 c2 b7 cb b8 b6 ae ab 63 d3 fd 23 b6 cb 6c 2b 11 1d eb 7a 29 09 97 da fa a4 ea e3 b5 0c a2 af 22 > WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > WPA: Sending EAPOL-Key 2/4 > WPA: TX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 09 00 20 00 00 00 00 00 00 00 01 2e e3 7a cc cd 1e 3f e1 17 76 10 f1 8b 6e dc 53 5f c0 31 b9 71 40 e2 7b a3 04 75 0c 66 9d 95 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e7 8f 0a 5a 75 f2 89 57 b0 1a 05 ce 6a 8d 81 bc 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 > RX EAPOL from 00:15:0c:d6:c7:74 > RX EAPOL - hexdump(len=125): 01 03 00 79 fe 01 c9 00 20 00 00 00 00 00 00 00 02 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf 00 1a dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > IEEE 802.1X RX: version=1 type=3 length=121 > EAPOL-Key type=254 > key_info 0x1c9 (ver=1 keyidx=0 rsvd=0 Pairwise Install Ack MIC) > key_length=32 key_data_length=26 > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02 > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 > key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_mic - hexdump(len=16): 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf > WPA: RX EAPOL-Key - hexdump(len=125): 01 03 00 79 fe 01 c9 00 20 00 00 00 00 00 00 00 02 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 48 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a ab b0 de f9 2d d0 1f ca e3 17 b6 45 05 f2 bf 00 1a dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE > WPA: RX message 3 of 4-Way Handshake from 00:15:0c:d6:c7:74 (ver=1) > WPA: IE KeyData - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 > WPA: Sending EAPOL-Key 4/4 > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 01 09 00 20 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e bb 0b 30 e4 9f aa f4 ba 44 93 4c 01 68 d3 97 00 00 > WPA: Installing PTK to the driver. > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > wpa_driver_wext_set_key: alg=2 key_idx=0 set_tx=1 seq_len=6 key_len=32 > State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE > RX EAPOL from 00:15:0c:d6:c7:74 > RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 03 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > IEEE 802.1X RX: version=1 type=3 length=127 > EAPOL-Key type=254 > key_info 0x3a1 (ver=1 keyidx=2 rsvd=0 Group Ack MIC Secure) > key_length=32 key_data_length=32 > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 03 > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 > key_iv - hexdump(len=16): 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_mic - hexdump(len=16): 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 > WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 03 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2b a2 ed 59 9c 0f e7 1e 70 ba 81 11 44 29 8d 13 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > WPA: RX message 1 of Group Key or STAKey Handshake from 00:15:0c:d6:c7:74 (ver=1) > State: GROUP_HANDSHAKE -> GROUP_HANDSHAKE > WPA: Group Key - hexdump(len=32): 4e 6c c3 3d 3a c5 a6 49 db 31 9d ab 2e b7 15 6f 38 e9 0a ef 7d 14 7a da a0 fa cb 3e c5 c1 b8 b6 > WPA: Installing GTK to the driver (keyidx=2 tx=0). > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > wpa_driver_wext_set_key: alg=2 key_idx=2 set_tx=0 seq_len=6 key_len=32 > WPA: Sending EAPOL-Key 2/2 > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 21 00 20 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 59 fb ed dc 79 e9 fd 4f 65 e1 41 67 42 97 c8 58 00 00 > WPA: Key negotiation completed with 00:15:0c:d6:c7:74 [PTK=TKIP GTK=TKIP] > Cancelling authentication timeout > State: GROUP_HANDSHAKE -> COMPLETED > CTRL-EVENT-CONNECTED - Connection to 00:15:0c:d6:c7:74 completed (auth) [id=0 id_str=] > wpa_driver_wext_set_operstate: operstate 0->1 (UP) > WEXT: Operstate: linkmode=-1, operstate=6 > EAPOL: External notification - portValid=1 > EAPOL: External notification - EAP success=1 > EAPOL: SUPP_PAE entering state AUTHENTICATING > EAPOL: SUPP_BE entering state SUCCESS > EAP: EAP entering state DISABLED > EAPOL: SUPP_PAE entering state AUTHENTICATED > EAPOL: SUPP_BE entering state IDLE > RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) > RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added > RX EAPOL from 00:15:0c:d6:c7:74 > RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 04 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > IEEE 802.1X RX: version=1 type=3 length=127 > EAPOL-Key type=254 > key_info 0x3a1 (ver=1 keyidx=2 rsvd=0 Group Ack MIC Secure) > key_length=32 key_data_length=32 > replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 04 > key_nonce - hexdump(len=32): 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 > key_iv - hexdump(len=16): 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 > key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 > key_mic - hexdump(len=16): 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c > WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 a1 00 20 00 00 00 00 00 00 00 04 33 dc ab 99 77 cb 37 23 57 10 d9 11 91 cf 06 17 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 47 49 f0 27 c7 a4 d3 9b fd b3 ab 25 fe 27 49 fa 49 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 97 6b 70 91 95 9e c6 ab 10 f1 d0 61 1d 55 7c 00 20 14 72 27 88 67 7e e5 bd e0 fb 45 25 aa ea f5 a3 9a f1 86 35 18 f4 95 e7 71 b6 c0 c1 62 ba 80 97 > WPA: RX message 1 of Group Key or STAKey Handshake from 00:15:0c:d6:c7:74 (ver=1) > State: COMPLETED -> GROUP_HANDSHAKE > WPA: Group Key - hexdump(len=32): 4e 6c c3 3d 3a c5 a6 49 db 31 9d ab 2e b7 15 6f 38 e9 0a ef 7d 14 7a da a0 fa cb 3e c5 c1 b8 b6 > WPA: Installing GTK to the driver (keyidx=2 tx=0). > WPA: RSC - hexdump(len=6): 00 00 00 00 00 00 > wpa_driver_wext_set_key: alg=2 key_idx=2 set_tx=0 seq_len=6 key_len=32 > WPA: Sending EAPOL-Key 2/2 > WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 03 21 00 20 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 1a 45 42 95 40 d8 d7 ab b5 58 53 40 e0 5a e8 00 00 > WPA: Group rekeying completed with 00:15:0c:d6:c7:74 [GTK=TKIP] > State: GROUP_HANDSHAKE -> COMPLETED > EAPOL: startWhen --> 0 > CTRL-EVENT-TERMINATING - signal 2 received > Removing interface wlan0 > State: COMPLETED -> DISCONNECTED > wpa_driver_wext_set_operstate: operstate 1->0 (DORMANT) > WEXT: Operstate: linkmode=-1, operstate=5 > wpa_driver_wext_deauthenticate > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > EAPOL: External notification - portEnabled=0 > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: SUPP_BE entering state INITIALIZE > EAPOL: External notification - portValid=0 > wpa_driver_wext_set_wpa > wpa_driver_wext_set_drop_unencrypted > wpa_driver_wext_set_countermeasures > No keys have been configured - skip key clearing > WEXT: Operstate: linkmode=0, operstate=6 > Cancelling scan request > > DRIVER NDISWRAPPER: > > [root@caelum space]# iwconfig -v > iwconfig Wireless-Tools version 29 > Compatible with Wireless Extension v11 to v21. > > Kernel Currently compiled with Wireless Extension v21. > > wlan0 Recommend Wireless Extension v18 or later, > Currently compiled with Wireless Extension v21. > > [root@caelum space]# > > ---------------------------------------------------------- > > DRIVER PRISM54: > > [root@caelum space]# iwconfig -v > iwconfig Wireless-Tools version 29 > Compatible with Wireless Extension v11 to v21. > > Kernel Currently compiled with Wireless Extension v21. > > eth1 Recommend Wireless Extension v19 or later, > Currently compiled with Wireless Extension v21. > > [root@caelum space]# > > > -- John W. Linville linville@xxxxxxxxxxxxx - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
