There are three errors in the transcription of the latest revision to the B6PHY init specifications. Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx> --- John, This patch should be applied to wireless-2.6 and sent upstream to 2.6.21-rcX. Larry Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_phy.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_phy.c +++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_phy.c @@ -859,6 +859,11 @@ static void bcm43xx_phy_initb6(struct bc bcm43xx_radio_write16(bcm, 0x005D, 0x0088); bcm43xx_radio_write16(bcm, 0x005E, 0x0088); bcm43xx_radio_write16(bcm, 0x007D, 0x0088); + bcm43xx_shm_write32(bcm, BCM43xx_SHM_SHARED, + BCM43xx_UCODEFLAGS_OFFSET, + (bcm43xx_shm_read32(bcm, BCM43xx_SHM_SHARED, + BCM43xx_UCODEFLAGS_OFFSET) + | 0x00000200)); } if (radio->revision == 8) { bcm43xx_radio_write16(bcm, 0x0051, 0x0000); @@ -941,7 +946,8 @@ static void bcm43xx_phy_initb6(struct bc bcm43xx_phy_write(bcm, 0x0038, 0x0668); bcm43xx_radio_set_txpower_bg(bcm, 0xFFFF, 0xFFFF, 0xFFFF); if (radio->revision <= 5) - bcm43xx_phy_write(bcm, 0x005D, bcm43xx_phy_read(bcm, 0x005D) | 0x0003); + bcm43xx_phy_write(bcm, 0x005D, (bcm43xx_phy_read(bcm, 0x005D) + & 0xFF80) | 0x0003); if (radio->revision <= 2) bcm43xx_radio_write16(bcm, 0x005D, 0x000D); @@ -958,7 +964,7 @@ static void bcm43xx_phy_initb6(struct bc bcm43xx_phy_write(bcm, 0x0016, 0x0410); bcm43xx_phy_write(bcm, 0x0017, 0x0820); bcm43xx_phy_write(bcm, 0x0062, 0x0007); - (void) bcm43xx_radio_calibrationvalue(bcm); + bcm43xx_radio_init2050(bcm); bcm43xx_phy_lo_g_measure(bcm); if (bcm->sprom.boardflags & BCM43xx_BFL_RSSI) { bcm43xx_calc_nrssi_slope(bcm); - To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html