Search Linux Wireless

Re: RFT: The real fix for BCM4311 and BCM4312

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 10, 2007 at 05:41:06PM -0600, Larry Finger wrote:
> Miles Lane wrote:
> > I am testing this patch applied to the wireless-net git tree.
> > The card is a Linksys WPC54G.  The card is still getting very
> > weak signal strength and the connection seems unresponsive
> > most of the time.
> 
> As the subject says, the patch was for 4311 and 4312 cards. The 4318's are not yet fixed.
> 
> As measured by my RF receiver, the amplitude of the 4318 is about -70 dBm, the 4311 is about -60 dBm
> and the 4306 is -50 dBm. All should have the -50 reading with my test setup.
> 
> I'm working on the power routines and will let you know.

FWIW, this patch seems to have helped some BCM4311 and BCM4312 wielding
Fedora users.

John
-- 
John W. Linville
linville@xxxxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux