Search Linux Wireless

Re: How to start with a Marvell driver (non-USB, non-OLPC)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > I think the biggest problem here is the firmware. The OLPC
> > people have a special firmware for their USB dongle, which
> > is not used in other chips, so a driver that has been
> > heavily adapted to this firmware isn't easy to mangle to a
> > different firmware.
>
> No, it really hasn't.  The mesh-specific bits are a separate
> code path, and we routinely run non-mesh firmware using this
> driver.  If there are places that are missing run-time
> firmware version checks, then we need to fix those places.

In the libertas mailing list someone published the "WLAN Firmware 
Spec v5.1" spec, so I guess that you're now using this firmware. 
But the Windows driver that I got hold on (to extract the 
firmware) all had a 5.0 in their driver name, so I guess they 
have a v5.0 firmware.

But I guess this can be handled with if (fw_version >= 
FW_VERSION_5_1) or something like this.


> Again, why don't we work together?  We are _not_ intentionally
> screwing over anybody else, and if there are pieces that you
> need, why don't we put those pieces back in?

Based on the things you said, I see no reason NOT to work 
together.


> We are _not_ intentionally screwing over anybody else, and if
> there are pieces that you need, why don't we put those pieces
> back in?

I did not say this. I just saw in GIT that you remove misc things 
or discussed the removed of things (e.g. CIS related code), so I 
guessed that you only go into the USB dongle direction. But 
maybe you weren't aware that other WLAN devices with similar 
chips, but different host interface are available.


> The original libertas hardware abstraction bits really sucked.

Did they release them as GPL as well?  Or do you refer to the 
copyrighted driver that is downloadable from some vendors?



I'm already in libertas-dev, so when I have time to look at the 
driver, I'll post some patches there. Rigth now I don't have 
much, e.g. I just put the infrastructure in place so that the 
PCMCIA subsystem detects the card and loads my driver.
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux