On Tue, Feb 06, 2007 at 07:06:07PM -0500, Jeff Garzik wrote:
> Would you mind rebasing & resending, kind sir?
By your command! :-)
---
The following changes since commit 62d0cfcb27cf755cebdc93ca95dabc83608007cd:
Linus Torvalds (1):
Linux 2.6.20
are found in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git upstream
Daniel Drake (1):
zd1211rw: Remove noisy debug message
Larry Finger (3):
bcm43xx: Fix problem with >1 GB RAM
bcm43xx: Fix scaling error for 'iwlist rate' information
bcm43xx: Fix scaling error for 'iwlist freq' information
Maxime Austruy (1):
zd1211rw: fix potential leak in usb_init
Michael Buesch (1):
bcm43xx: Enable fwpostfix in nondebug bcm43xx
Robert P. J. Day (1):
Rename IPW2100 debugging macros to not look like config options.
Ulrich Kunitz (3):
zd1211rw: Reset device in the probe call
zd1211rw: Fixed array size issue in reset_mode
zd1211rw: Added error stats update
drivers/net/wireless/bcm43xx/bcm43xx.h | 1 +
drivers/net/wireless/bcm43xx/bcm43xx_dma.c | 171 +++++++++++++++++++--------
drivers/net/wireless/bcm43xx/bcm43xx_main.c | 6 +-
drivers/net/wireless/bcm43xx/bcm43xx_wx.c | 28 ++--
drivers/net/wireless/ipw2100.c | 16 ++--
drivers/net/wireless/zd1211rw/zd_mac.c | 44 ++++++--
drivers/net/wireless/zd1211rw/zd_usb.c | 12 ++
7 files changed, 194 insertions(+), 84 deletions(-)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index 8286678..4168b1a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -766,6 +766,7 @@ struct bcm43xx_private {
* This is currently always BCM43xx_BUSTYPE_PCI
*/
u8 bustype;
+ u64 dma_mask;
u16 board_vendor;
u16 board_type;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
index 978ed09..6e0dc76 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -145,16 +145,14 @@ dma_addr_t map_descbuffer(struct bcm43xx_dmaring *ring,
int tx)
{
dma_addr_t dmaaddr;
+ int direction = PCI_DMA_FROMDEVICE;
- if (tx) {
- dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
- buf, len,
- DMA_TO_DEVICE);
- } else {
- dmaaddr = dma_map_single(&ring->bcm->pci_dev->dev,
+ if (tx)
+ direction = PCI_DMA_TODEVICE;
+
+ dmaaddr = pci_map_single(ring->bcm->pci_dev,
buf, len,
- DMA_FROM_DEVICE);
- }
+ direction);
return dmaaddr;
}
@@ -166,13 +164,13 @@ void unmap_descbuffer(struct bcm43xx_dmaring *ring,
int tx)
{
if (tx) {
- dma_unmap_single(&ring->bcm->pci_dev->dev,
+ pci_unmap_single(ring->bcm->pci_dev,
addr, len,
- DMA_TO_DEVICE);
+ PCI_DMA_TODEVICE);
} else {
- dma_unmap_single(&ring->bcm->pci_dev->dev,
+ pci_unmap_single(ring->bcm->pci_dev,
addr, len,
- DMA_FROM_DEVICE);
+ PCI_DMA_FROMDEVICE);
}
}
@@ -183,8 +181,8 @@ void sync_descbuffer_for_cpu(struct bcm43xx_dmaring *ring,
{
assert(!ring->tx);
- dma_sync_single_for_cpu(&ring->bcm->pci_dev->dev,
- addr, len, DMA_FROM_DEVICE);
+ pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
+ addr, len, PCI_DMA_FROMDEVICE);
}
static inline
@@ -194,8 +192,8 @@ void sync_descbuffer_for_device(struct bcm43xx_dmaring *ring,
{
assert(!ring->tx);
- dma_sync_single_for_device(&ring->bcm->pci_dev->dev,
- addr, len, DMA_FROM_DEVICE);
+ pci_dma_sync_single_for_cpu(ring->bcm->pci_dev,
+ addr, len, PCI_DMA_TODEVICE);
}
/* Unmap and free a descriptor buffer. */
@@ -214,17 +212,53 @@ void free_descriptor_buffer(struct bcm43xx_dmaring *ring,
static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
{
- struct device *dev = &(ring->bcm->pci_dev->dev);
-
- ring->descbase = dma_alloc_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
- &(ring->dmabase), GFP_KERNEL);
+ ring->descbase = pci_alloc_consistent(ring->bcm->pci_dev, BCM43xx_DMA_RINGMEMSIZE,
+ &(ring->dmabase));
if (!ring->descbase) {
- printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
- return -ENOMEM;
+ /* Allocation may have failed due to pci_alloc_consistent
+ insisting on use of GFP_DMA, which is more restrictive
+ than necessary... */
+ struct dma_desc *rx_ring;
+ dma_addr_t rx_ring_dma;
+
+ rx_ring = kzalloc(BCM43xx_DMA_RINGMEMSIZE, GFP_KERNEL);
+ if (!rx_ring)
+ goto out_err;
+
+ rx_ring_dma = pci_map_single(ring->bcm->pci_dev, rx_ring,
+ BCM43xx_DMA_RINGMEMSIZE,
+ PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(rx_ring_dma) ||
+ rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
+ /* Sigh... */
+ if (!pci_dma_mapping_error(rx_ring_dma))
+ pci_unmap_single(ring->bcm->pci_dev,
+ rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
+ PCI_DMA_BIDIRECTIONAL);
+ rx_ring_dma = pci_map_single(ring->bcm->pci_dev,
+ rx_ring, BCM43xx_DMA_RINGMEMSIZE,
+ PCI_DMA_BIDIRECTIONAL);
+ if (pci_dma_mapping_error(rx_ring_dma) ||
+ rx_ring_dma + BCM43xx_DMA_RINGMEMSIZE > ring->bcm->dma_mask) {
+ assert(0);
+ if (!pci_dma_mapping_error(rx_ring_dma))
+ pci_unmap_single(ring->bcm->pci_dev,
+ rx_ring_dma, BCM43xx_DMA_RINGMEMSIZE,
+ PCI_DMA_BIDIRECTIONAL);
+ goto out_err;
+ }
+ }
+
+ ring->descbase = rx_ring;
+ ring->dmabase = rx_ring_dma;
}
memset(ring->descbase, 0, BCM43xx_DMA_RINGMEMSIZE);
return 0;
+out_err:
+ printk(KERN_ERR PFX "DMA ringmemory allocation failed\n");
+ return -ENOMEM;
}
static void free_ringmemory(struct bcm43xx_dmaring *ring)
@@ -407,6 +441,29 @@ static int setup_rx_descbuffer(struct bcm43xx_dmaring *ring,
if (unlikely(!skb))
return -ENOMEM;
dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
+ /* This hardware bug work-around adapted from the b44 driver.
+ The chip may be unable to do PCI DMA to/from anything above 1GB */
+ if (pci_dma_mapping_error(dmaaddr) ||
+ dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
+ /* This one has 30-bit addressing... */
+ if (!pci_dma_mapping_error(dmaaddr))
+ pci_unmap_single(ring->bcm->pci_dev,
+ dmaaddr, ring->rx_buffersize,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(skb);
+ skb = __dev_alloc_skb(ring->rx_buffersize,GFP_DMA);
+ if (skb == NULL)
+ return -ENOMEM;
+ dmaaddr = pci_map_single(ring->bcm->pci_dev,
+ skb->data, ring->rx_buffersize,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(dmaaddr) ||
+ dmaaddr + ring->rx_buffersize > ring->bcm->dma_mask) {
+ assert(0);
+ dev_kfree_skb_any(skb);
+ return -ENOMEM;
+ }
+ }
meta->skb = skb;
meta->dmaaddr = dmaaddr;
skb->dev = ring->bcm->net_dev;
@@ -636,8 +693,10 @@ struct bcm43xx_dmaring * bcm43xx_setup_dmaring(struct bcm43xx_private *bcm,
err = dmacontroller_setup(ring);
if (err)
goto err_free_ringmemory;
+ return ring;
out:
+ printk(KERN_ERR PFX "Error in bcm43xx_setup_dmaring\n");
return ring;
err_free_ringmemory:
@@ -705,30 +764,16 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm)
struct bcm43xx_dmaring *ring;
int err = -ENOMEM;
int dma64 = 0;
- u64 mask = bcm43xx_get_supported_dma_mask(bcm);
- int nobits;
- if (mask == DMA_64BIT_MASK) {
+ bcm->dma_mask = bcm43xx_get_supported_dma_mask(bcm);
+ if (bcm->dma_mask == DMA_64BIT_MASK)
dma64 = 1;
- nobits = 64;
- } else if (mask == DMA_32BIT_MASK)
- nobits = 32;
- else
- nobits = 30;
- err = pci_set_dma_mask(bcm->pci_dev, mask);
- err |= pci_set_consistent_dma_mask(bcm->pci_dev, mask);
- if (err) {
-#ifdef CONFIG_BCM43XX_PIO
- printk(KERN_WARNING PFX "DMA not supported on this device."
- " Falling back to PIO.\n");
- bcm->__using_pio = 1;
- return -ENOSYS;
-#else
- printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
- "Please recompile the driver with PIO support.\n");
- return -ENODEV;
-#endif /* CONFIG_BCM43XX_PIO */
- }
+ err = pci_set_dma_mask(bcm->pci_dev, bcm->dma_mask);
+ if (err)
+ goto no_dma;
+ err = pci_set_consistent_dma_mask(bcm->pci_dev, bcm->dma_mask);
+ if (err)
+ goto no_dma;
/* setup TX DMA channels. */
ring = bcm43xx_setup_dmaring(bcm, 0, 1, dma64);
@@ -774,7 +819,9 @@ int bcm43xx_dma_init(struct bcm43xx_private *bcm)
dma->rx_ring3 = ring;
}
- dprintk(KERN_INFO PFX "%d-bit DMA initialized\n", nobits);
+ dprintk(KERN_INFO PFX "%d-bit DMA initialized\n",
+ (bcm->dma_mask == DMA_64BIT_MASK) ? 64 :
+ (bcm->dma_mask == DMA_32BIT_MASK) ? 32 : 30);
err = 0;
out:
return err;
@@ -800,7 +847,17 @@ err_destroy_tx1:
err_destroy_tx0:
bcm43xx_destroy_dmaring(dma->tx_ring0);
dma->tx_ring0 = NULL;
- goto out;
+no_dma:
+#ifdef CONFIG_BCM43XX_PIO
+ printk(KERN_WARNING PFX "DMA not supported on this device."
+ " Falling back to PIO.\n");
+ bcm->__using_pio = 1;
+ return -ENOSYS;
+#else
+ printk(KERN_ERR PFX "FATAL: DMA not supported and PIO not configured. "
+ "Please recompile the driver with PIO support.\n");
+ return -ENODEV;
+#endif /* CONFIG_BCM43XX_PIO */
}
/* Generate a cookie for the TX header. */
@@ -905,6 +962,7 @@ static void dma_tx_fragment(struct bcm43xx_dmaring *ring,
struct bcm43xx_dmadesc_generic *desc;
struct bcm43xx_dmadesc_meta *meta;
dma_addr_t dmaaddr;
+ struct sk_buff *bounce_skb;
assert(skb_shinfo(skb)->nr_frags == 0);
@@ -924,9 +982,28 @@ static void dma_tx_fragment(struct bcm43xx_dmaring *ring,
skb->len - sizeof(struct bcm43xx_txhdr),
(cur_frag == 0),
generate_cookie(ring, slot));
+ dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
+ if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
+ /* chip cannot handle DMA to/from > 1GB, use bounce buffer (copied from b44 driver) */
+ if (!dma_mapping_error(dmaaddr))
+ unmap_descbuffer(ring, dmaaddr, skb->len, 1);
+ bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC|GFP_DMA);
+ if (!bounce_skb)
+ return;
+ dmaaddr = map_descbuffer(ring, bounce_skb->data, bounce_skb->len, 1);
+ if (dma_mapping_error(dmaaddr) || dmaaddr + skb->len > ring->bcm->dma_mask) {
+ if (!dma_mapping_error(dmaaddr))
+ unmap_descbuffer(ring, dmaaddr, skb->len, 1);
+ dev_kfree_skb_any(bounce_skb);
+ assert(0);
+ return;
+ }
+ memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+ dev_kfree_skb_any(skb);
+ skb = bounce_skb;
+ }
meta->skb = skb;
- dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
meta->dmaaddr = dmaaddr;
fill_descriptor(ring, desc, dmaaddr,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 91b752e..62c6235 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -95,13 +95,9 @@ static int modparam_noleds;
module_param_named(noleds, modparam_noleds, int, 0444);
MODULE_PARM_DESC(noleds, "Turn off all LED activity");
-#ifdef CONFIG_BCM43XX_DEBUG
static char modparam_fwpostfix[64];
module_param_string(fwpostfix, modparam_fwpostfix, 64, 0444);
-MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for debugging.");
-#else
-# define modparam_fwpostfix ""
-#endif /* CONFIG_BCM43XX_DEBUG*/
+MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple firmware image versions.");
/* If you want to debug with just a single device, enable this,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index a659442..6961be6 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -261,22 +261,22 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
if (phy->type == BCM43xx_PHYTYPE_A ||
phy->type == BCM43xx_PHYTYPE_G) {
range->num_bitrates = 8;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB;
- range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_6MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_9MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_12MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_18MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_24MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_36MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_48MB * 500000;
+ range->bitrate[i++] = IEEE80211_OFDM_RATE_54MB * 500000;
}
if (phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G) {
range->num_bitrates += 4;
- range->bitrate[i++] = IEEE80211_CCK_RATE_1MB;
- range->bitrate[i++] = IEEE80211_CCK_RATE_2MB;
- range->bitrate[i++] = IEEE80211_CCK_RATE_5MB;
- range->bitrate[i++] = IEEE80211_CCK_RATE_11MB;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_1MB * 500000;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_2MB * 500000;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_5MB * 500000;
+ range->bitrate[i++] = IEEE80211_CCK_RATE_11MB * 500000;
}
geo = ieee80211_get_geo(bcm->ieee);
@@ -286,7 +286,7 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
if (j == IW_MAX_FREQUENCIES)
break;
range->freq[j].i = j + 1;
- range->freq[j].m = geo->a[i].freq;//FIXME?
+ range->freq[j].m = geo->a[i].freq * 100000;
range->freq[j].e = 1;
j++;
}
@@ -294,7 +294,7 @@ static int bcm43xx_wx_get_rangeparams(struct net_device *net_dev,
if (j == IW_MAX_FREQUENCIES)
break;
range->freq[j].i = j + 1;
- range->freq[j].m = geo->bg[i].freq;//FIXME?
+ range->freq[j].m = geo->bg[i].freq * 100000;
range->freq[j].e = 1;
j++;
}
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index b85857a..d0639a4 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -175,7 +175,7 @@ that only one external action is invoked at a time.
/* Debugging stuff */
#ifdef CONFIG_IPW2100_DEBUG
-#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
+#define IPW2100_RX_DEBUG /* Reception debugging */
#endif
MODULE_DESCRIPTION(DRV_DESCRIPTION);
@@ -2239,7 +2239,7 @@ static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
priv->snapshot[0] = NULL;
}
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
{
int i;
@@ -2314,13 +2314,13 @@ static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
* The size of the constructed ethernet
*
*/
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
#endif
static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
{
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
struct ipw2100_status *status = &priv->status_queue.drv[i];
u32 match, reg;
int j;
@@ -2342,7 +2342,7 @@ static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
}
#endif
-#ifdef CONFIG_IPW2100_DEBUG_C3
+#ifdef IPW2100_DEBUG_C3
/* Halt the fimrware so we can get a good image */
write_register(priv->net_dev, IPW_REG_RESET_REG,
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
@@ -2413,7 +2413,7 @@ static void isr_rx(struct ipw2100_priv *priv, int i,
skb_put(packet->skb, status->frame_size);
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
/* Make a copy of the frame so we can dump it to the logs if
* ieee80211_rx fails */
memcpy(packet_data, packet->skb->data,
@@ -2421,7 +2421,7 @@ static void isr_rx(struct ipw2100_priv *priv, int i,
#endif
if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
-#ifdef CONFIG_IPW2100_RX_DEBUG
+#ifdef IPW2100_RX_DEBUG
IPW_DEBUG_DROP("%s: Non consumed packet:\n",
priv->net_dev->name);
printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
@@ -4912,7 +4912,7 @@ static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
else
priv->power_mode = IPW_POWER_ENABLED | power_level;
-#ifdef CONFIG_IPW2100_TX_POWER
+#ifdef IPW2100_TX_POWER
if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
/* Set beacon interval */
cmd.host_command = TX_POWER_INDEX;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a085241..4c5f78e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -156,7 +156,7 @@ void zd_mac_clear(struct zd_mac *mac)
static int reset_mode(struct zd_mac *mac)
{
struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
- struct zd_ioreq32 ioreqs[3] = {
+ struct zd_ioreq32 ioreqs[] = {
{ CR_RX_FILTER, STA_RX_FILTER },
{ CR_SNIFFER_ON, 0U },
};
@@ -164,10 +164,9 @@ static int reset_mode(struct zd_mac *mac)
if (ieee->iw_mode == IW_MODE_MONITOR) {
ioreqs[0].value = 0xffffffff;
ioreqs[1].value = 0x1;
- ioreqs[2].value = ENC_SNIFFER;
}
- return zd_iowrite32a(&mac->chip, ioreqs, 3);
+ return zd_iowrite32a(&mac->chip, ioreqs, ARRAY_SIZE(ioreqs));
}
int zd_mac_open(struct net_device *netdev)
@@ -904,16 +903,21 @@ static int fill_ctrlset(struct zd_mac *mac,
static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri)
{
int i, r;
+ struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
for (i = 0; i < txb->nr_frags; i++) {
struct sk_buff *skb = txb->fragments[i];
r = fill_ctrlset(mac, txb, i);
- if (r)
+ if (r) {
+ ieee->stats.tx_dropped++;
return r;
+ }
r = zd_usb_tx(&mac->chip.usb, skb->data, skb->len);
- if (r)
+ if (r) {
+ ieee->stats.tx_dropped++;
return r;
+ }
}
/* FIXME: shouldn't this be handled by the upper layers? */
@@ -1063,9 +1067,23 @@ static int fill_rx_stats(struct ieee80211_rx_stats *stats,
*pstatus = status = zd_tail(buffer, length, sizeof(struct rx_status));
if (status->frame_status & ZD_RX_ERROR) {
- /* FIXME: update? */
+ struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+ ieee->stats.rx_errors++;
+ if (status->frame_status & ZD_RX_TIMEOUT_ERROR)
+ ieee->stats.rx_missed_errors++;
+ else if (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR)
+ ieee->stats.rx_fifo_errors++;
+ else if (status->frame_status & ZD_RX_DECRYPTION_ERROR)
+ ieee->ieee_stats.rx_discards_undecryptable++;
+ else if (status->frame_status & ZD_RX_CRC32_ERROR) {
+ ieee->stats.rx_crc_errors++;
+ ieee->ieee_stats.rx_fcs_errors++;
+ }
+ else if (status->frame_status & ZD_RX_CRC16_ERROR)
+ ieee->stats.rx_crc_errors++;
return -EINVAL;
}
+
memset(stats, 0, sizeof(struct ieee80211_rx_stats));
stats->len = length - (ZD_PLCP_HEADER_SIZE + IEEE80211_FCS_LEN +
+ sizeof(struct rx_status));
@@ -1094,14 +1112,16 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
if (skb->len < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN +
IEEE80211_FCS_LEN + sizeof(struct rx_status))
{
- dev_dbg_f(zd_mac_dev(mac), "Packet with length %u to small.\n",
- skb->len);
+ ieee->stats.rx_errors++;
+ ieee->stats.rx_length_errors++;
goto free_skb;
}
r = fill_rx_stats(&stats, &status, mac, skb->data, skb->len);
if (r) {
- /* Only packets with rx errors are included here. */
+ /* Only packets with rx errors are included here.
+ * The error stats have already been set in fill_rx_stats.
+ */
goto free_skb;
}
@@ -1114,8 +1134,10 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb)
r = filter_rx(ieee, skb->data, skb->len, &stats);
if (r <= 0) {
- if (r < 0)
+ if (r < 0) {
+ ieee->stats.rx_errors++;
dev_dbg_f(zd_mac_dev(mac), "Error in packet.\n");
+ }
goto free_skb;
}
@@ -1146,7 +1168,9 @@ int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length)
skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length);
if (!skb) {
+ struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n");
+ ieee->stats.rx_dropped++;
return -ENOMEM;
}
skb_reserve(skb, sizeof(struct zd_rt_hdr));
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 605e96e..a3217a8 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -401,6 +401,12 @@ out:
static inline void handle_retry_failed_int(struct urb *urb)
{
+ struct zd_usb *usb = urb->context;
+ struct zd_mac *mac = zd_usb_to_mac(usb);
+ struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+
+ ieee->stats.tx_errors++;
+ ieee->ieee_stats.tx_retry_limit_exceeded++;
dev_dbg_f(urb_dev(urb), "retry failed interrupt\n");
}
@@ -575,6 +581,9 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer,
if (length < sizeof(struct rx_length_info)) {
/* It's not a complete packet anyhow. */
+ struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac);
+ ieee->stats.rx_errors++;
+ ieee->stats.rx_length_errors++;
return;
}
length_info = (struct rx_length_info *)
@@ -1027,6 +1036,8 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
goto error;
}
+ usb_reset_device(interface_to_usbdev(intf));
+
netdev = zd_netdev_alloc(intf);
if (netdev == NULL) {
r = -ENOMEM;
@@ -1128,6 +1139,7 @@ static int __init usb_init(void)
r = usb_register(&driver);
if (r) {
+ destroy_workqueue(zd_workqueue);
printk(KERN_ERR "%s usb_register() failed. Error number %d\n",
driver.name, r);
return r;
--
John W. Linville
linville@xxxxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
