How to trace wimaxd problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Doug and Inaky,

As your suggestion, the problem was solved.

Very very thanks for your idea,

Johnny Lee ??? 
========================== 
???? MICETEK International Inc. 
??: 403 ???????303?7?
??: (04) 2302-6168   ext:106
==========================

-----Original Message-----
From: Johnny Lee [mailto:johnny.lee at micetek.com] 
Sent: Friday, January 07, 2011 1:15 AM
To: 'Doug Kehn'; 'Inaky Perez-Gonzalez'
Cc: 'wimax at linuxwimax.org'
Subject: RE: How to trace wimaxd problem

Hi Doug and Inaky,

Thanks for this idea. I'm trying...
And I'll let you know the result soon.
I know my problem is not the wimax driver issue.
It's an install problem by myself.
I'm really thanks for your kindly help even though it is not your job.

Thanks a million,

Johnny Lee ???
==========================
???? MICETEK International Inc. 
??: 403 ???????303?7?
??: (04) 2302-6168   ext:106
==========================

-----Original Message-----
From: Doug Kehn [mailto:rdkehn at yahoo.com]
Sent: Thursday, January 06, 2011 12:03 AM
To: 'Inaky Perez-Gonzalez'; Johnny Lee
Cc: wimax at linuxwimax.org
Subject: RE: How to trace wimaxd problem

Hi Johnny,

--- On Tue, 1/4/11, Johnny Lee <johnny.lee at micetek.com> wrote:

> From: Johnny Lee <johnny.lee at micetek.com>
> Subject: RE: How to trace wimaxd problem
> To: "'Inaky Perez-Gonzalez'" <inaky at linux.intel.com>
> Cc: "'Doug Kehn'" <rdkehn at yahoo.com>, wimax at linuxwimax.org
> Date: Tuesday, January 4, 2011, 8:59 PM Dear Inaky and Doug,
> 
> Attached file is my file structure for develop new linux distrubution 
> with wimax support.
> All WiMAX linux drivers and packages are put in blue box as page 1 
> show that.
> My target path is in red box as page 1 show that.
> Please refer to my configure instruction in the attached file.
> 

For wimax-tools and wimax --prefix=/devel/build-tree/root is used.  This
means that wimax-tools and wimax will be looking for 'things' based at
/devel/build-tree/root on the target system.  I don't know but I doubt the
target root filesystem contains such a path.

Can you try, for both wimax-tools and wimax, setting --prefix= and then
change the 'make install' to 'make install DESTDIR=/devel/build-tree/root?

# ./configure --prefix= \
--with-linux=/devel/linux-2.6.35 \
--with-libwimax=/devel/build-tree/root
# make
# make install DESTDIR=/devel/build-tree/root # pkg-config --modversion
libeap0

Regards,
...doug



      



[Index of Archives]     [Linux Kernel]     [Linux Wireless]     [Linux Bluetooth]     [Linux Netdev]     [Linux Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]

  Powered by Linux